Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
85
Problems Solving
User’s Guide
Image colours are not right
Check Remedy
Do the input signal settings match the signals
from the connected device?
If you connect a computer or RGB video to the [Computer/Component Video] port, and select
"Component Video" for "Computer Input" in the configuration menu, the projected image is tinged
with purplish red.
If you connect a component videog to the [Computer/Component Video] port, and select
"Computer" for "Computer Input" in the configuration menu, the projected image is tinged with
green.
Select the correct signal format for the connected source.
"Signal" - "Computer Input" sp.60, p.61
If a component videog or S-Videog source is connected to the projector, use the "Video Signal"
menu command to select the video signal format.
"Signal" - "Video Signal" sp.61
Has the image brightness been adjusted
correctly?
Use the "Brightness" menu command to adjust the brightness.
"Image" - "Brightness" sp.56, p.58
Are the cables connected correctly? Check that all of the cables required for projection are securely connected. sp.20– p.26
Has the image contrastg been adjusted
correctly?
Use the "Contrast" menu command to adjust the contrast.
"Image" - "Contrast" sp.56, p.58
Has the colour been adjusted correctly? Use the "Color Adjustment" menu command to adjust the colour.
"Image" - "Color Adjustment" sp.57, p.59
Have the colour intensity and tint been
adjusted correctly?
Use the "Color Intensity" and "Tint" menu commands to adjust the colour and tint.
"Image" - "Color Intensity", "Tint" sp.58
Only when projecting images
from a video source