Service manual

4-20
EMP-S3
SEIKO EPSON Revision:B
4.2.10 Removing the IF Case Set, RC Filter and SW2 Light Shade Sheet
1. Remove the SW2 Light Shade Sheet from the IF Case Set.
2. Remove the 2 (C.B.P-TITE, 3x10, F/ZB-3C) screws that secure the IF Case Set, disconnect
the Speaker Cable from connector CN1701 on the MA Board, and remove the IF Case Set
from the MA Board Assy.
3. Remove the Remote Control (RC) Filter from the IF Case Set.
Figure 4-21.
MA Borad Assy.
IF Case Set
Speaker Cable
RC Filter
CN1701
SW2 Light
Shde Sheet