Service manual

4-26
EMP-S3
SEIKO EPSON Revision:B
4.2.16 Removing the Exhaust Fan Assy, Fan 80, and Outer Exhaust Duct
1. Remove the (C.B.P-TITE, 3x10, F/ZB-3C) screw that secures the Exhaust Fan Assy and
remove it.
Figure 4-28.
C A U T I O N
 When installing the cable of both the Lamp Lid Detection Switch and the
Exhaust Fan, route them as shown in Figure 4-29.
Figure 4-29.
Exhaust Fan Assy
Lamp Lid Detection Switch Cable Exhaust Fan Cable