Service manual

4-27
EMP-S3
SEIKO EPSON Revision:B
2. Remove the 2 (C.B.P-TITE, 3x30, F/ZN-3C) screws that secure Fan 80, and remove the
Outer Exhaust Duct from the Exhaust Fan Assy.
Figure 4-31.
C A U T I O N
 When installing the Ballast Cable, route the cable and move the ferrite core
into the position as shown in Figure 4-30.
Figure 4-30.
Ballast Cable Ferrite Core
Outer Exhaust Duct
Fan 80