Service manual

5-3
EMP-S3
SEIKO EPSON Revision:B
 When the video source is S-Video or Video, the following screen is displayed.
5.1.2 Initializing (Resetting) the AS Menu Values
There are three levels of initialization that can be used to reset the projector usage history val-
ues stored in EEPROM.
1. Clearing the Basic Lamp Information
While the AS menu is being displayed, simultaneously press the [Source] and [] keys for
10 seconds.
2. Clearing All the Lamp Information
While the AS menu is being displayed, simultaneously press the
[Source] and [] keys for
10 seconds.
Item
Clearing the Lamp Informa-
tion
Clearing All the Lamp
Information
Total Operation Time No Change Reset to 0H
Lamp Operation Time Reset to 0H Reset to 0H
Lamp ON Reset to 1 Reset to 1
Lamp Replacement
Add 1 to the
current value
Reset to 0
Cool Down Complete Reset to 0 Reset to 0
Fatal Error (3 items) No Change Reset to 0
Number of Lights-out
(This item is not
displayed.)
Reset to 0 Reset to 0
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Video Signal
Video Signal
: -----------
: -----------
: -------------------------
: -------------------------
Total Operation Time
Total Operation Time
: 65535H
: 65535H
Lamp Operation Time
Lamp Operation Time
: 65535H
: 65535H
Lamp Op. Time (H/L)
Lamp Op. Time (H/L)
: 65535H/65535H
: 65535H/65535H
Lamp Replacement
Lamp Replacement
: 65535Times
: 65535Times
Lamp ON
Lamp ON
: 65535Times
: 65535Times
Cool Down Complete
Cool Down Complete
: 65535Times
: 65535Times
Fatal Error
Fatal Error
: T99 L99 I99
: T99 L99 I99
Engine Type
Engine Type
: XXXXXXXX
: XXXXXXXX
P
P
0Z00023041XV111
0Z00023041XV111
O
O
0Z3030WWV100
0Z3030WWV100
J
J
0Z1XV100
0Z1XV100
The last four digits show the PW
firmware version.
The last four digits show the Easy
MP firmware version.
The last four digits show the Y43
firmware version.