Service manual

5-5
EMP-S3
SEIKO EPSON Revision:B
In order to affect a DIP-SW setting change, turn off the Power button and cool down. The
new settings are in effect as soon as cool-down is complete.
SW3
0 Time to sleep mode 0 -
Configurable by 5
minutes, 1-255
minutes
Default: 30 Minutes
1 Time to sleep mode 1 - -
2 Time to sleep mode 1 - -
3 Time to sleep mode 1 - -
4 Time to sleep mode 1 - -
5 Time to sleep mode 0 - -
6 Time to sleep mode 0 - -
7 Time to sleep mode 0 - -
SW4 0 (reserved) - - -
1 (reserved) - - -
2
Lamp noise analysis
mode
0 0: OFF, 1: ON -
3 (reserved) - - -
4 (reserved) - - -
5 (reserved) - - -
6 (reserved) - - -
7 (reserved) - - -
SW6 0 (reserved) - - -
1
Imaging mask ON/OFF
when the lamp is on.
1
0: OFF (Displays at
once)
1: ON (Displays
black background)
Select whether to
display black
background or to
display an image.
2 (reserved) - - -
3
Power button ON/OFF
when locking the buttons.
1 0: OFF, 1: ON -
4
EMP Monitor standby
mode ON/OFF
1 0: OFF, 1: ON -
5 (reserved) - - -
6 (reserved) - - -
7 (reserved) - - -
DIP-SW
No
BIT Function
Default
Setting
Setting Value Note