User's Manual

The diskette drive is making loud or unusual noises.
Contact the EPSON Connection or your Authorized EPSON
Servicer.
Hard Disk Drive Problems
A newly installed hard disk drive is not working properly or
ifs performance is not what you expect.
Make sure you have installed the drive correctly and check all
cable connections. Also, check the jumper settings on your
drive.
You see a hard disk drive error when you start your system.
If you’ve installed an IDE drive, make sure you’ve defined the
correct hard disk drive type in SETUP. Also check that you’ve
enabled the built-in controller with the Peripherals
Setup options in SETUP.
If you installed a non-IDE hard disk drive, make sure it’s been
physically form atted. If it hasn’t been physically form atted, use
the format utility that came with the drive to format it. Also,
make sure you disable the built-in hard disk drive controller
using SETUP. (See Chapter 2.)
Make sure the jumpers on the hard disk drive are set correctly.
See the documentation that came with the drive for more
information.
You are unable to store data on the hard disk drive.
If your drive was not configured, make sure you have
partitioned and formatted it correctly for your operating
system. See your operating system manual for instructions.
6-8 Troubleshooting