User's Manual

Connecting the Keyboard
To connect the keyboard, hold the cable connector so the arrow
on the connector faces up. Insert it into the port marked K/B.
Caution
Although the connectors and ports for the keyboard and
mouse are physically identical, they cannot be used
interchangeably. Be sure to plug the keyboard connector
into the keyboard (K/B) port or you could damage your
system.
You can change the angle of the keyboard by adjusting the legs
on the bottom. Turn it over and flip each leg upward until it
locks into place. It is important to select the best angle so you
will prevent wrist fatigue. (You may even want to purchase a
wrist pad-sold at computer stores-for further comfort.)
To lower the keyboard, press each leg back into its slot.
Connecting the Mouse
Your computer includes an auxiliary port for a PS/2
compatible mouse that uses a round, miniature DIN (6-pin)
connector. If your mouse has this type of connector, you can
connect it to the computer’s built-in port.
Note
If your mouse requires a different interface, connect it to the
built-in serial port or an option card that provides the
interface.
To connect the mouse to the built-in mouse port, plug the
connector into the port marked MOUSE
1-6 Setting Up Your System