User's Manual

To turn on the computer, press the power button on the right

side of the front panel.

power

(SPEED)

indicator

hard drive

access

indicator

diskette

drive

power

button

The power indicator on the left side of the front panel lights

up. After a few seconds, the screen displays a count of the

system memory, and then the computer performs a

power-on diagnostics routine to make sure everything is

working correctly.

If necessary, use the controls on your monitor to adjust the

brightness and contrast until you can easily see the

characters on the screen. If your monitor has horizontal and

vertical hold controls, you may need to use them to

stabilize the display.

The screen displays the following prompt:

Press <DEL> If you want to run SETUP

Do not press any key yet;you just want to make sure the

computer is working. This prompt appears every time you

turn on your computer so you can run SETUP if necessary

After a few seconds, the prompt disappears.

Setting Up Your System 1-9