User's Manual

Defining Your Own Drive Type
If the parameters for your hard disk drive (listed in its
documentation) do not match any of the types listed in the
hard disk drive table in Appendix A, you can define your own
type. Follow these steps:
1. Move the cursor to the hard drive you are defining.
2. Press Page Up until you see type 47.
3. Type the values in each field that are appropriate for your
hard disk drive; press + to move the cursor to the next
field.
SETUP provides the hard disk size based on the values you
entered.
Setting the Primary Display Type
The Primary display option lets you define the type of
adapter you are using for your primary display. If you
connected your monitor to the computer’s built-in VGA port,
select VGA/PGA/EGA. If you installed a video card, check the
following table for the correct adapter type.
2-6 Running the SETUP Program