User's Manual
2.
Locate
the
hard
disk
drive
ribbon
cable
that
came
with
the
computer.
It is a
flat
cable
with
three
connectors:
one
on
each
end
and
one
in
the
middle,
as
shown
below.
tab
r
3.
Select
the
connector
on
the
end
of
the
longest
part
of
the
cable
(the
main
system
board
connector).
Notice
the
small
tab
in
the
middle
of
the
cable
connector,
as
shown
in
the
illustration
above.
Position
the
connector
so
that
the
tab
aligns
with
the
notch,
as
shown
below.
(The
option
card
connector
board
and
diskette
drive
ribbon
cable
are
removed
from
the
illustration
for
clarity.)
5-32
Installing and Removing Drives