User's Manual

6. Turn on the computer again
7. When you see Press <Del> If you want to run SETUP,
press Delete. You see the SETUP main menu. Press to
highlight option 3, Set Password options; then press
Enter. If you do not want to set a new password, go to
step 9. If you want to set a new password, go to step 8.
8. To set a new password, set the Password State option to
Installed and press Enter. Type a new password at the
prompt and press Enter. You must enter it twice. (See
Chapter 2 for more information.) Now go to step 10.
9. To disable the password, press PgUp or PgDn until the
Password State option is set to Not Installed;
then press Enter. (See Chapter 2 for more information.)
10. Save your settings as you exit SETUP. The computer reboots.
If you disabled password security, you do not see the
password prompt and can access your computer
immediately. If you set a new password, you see the
password prompt.
Keyboard Problems
If you have trouble with the keyboard, check the following:
1. If the screen displays a keyboard error message when you
turn on or reset the computer, make sure the keyboard is
securely connected to the correct port. See “Connecting the
Keyboard” in Chapter 1 for instructions.
2. If nothing happens when you type on the keyboard, see
“The Computer Does Not Respond,” above.
6-10
Troubleshooting