User's Manual

3. If you entered an MS-DOS command that you want to stop,
there are special key combinations you can use to cancel the
command. These methods may also work in your
application programs:
0 Press Pause
0 Hold down Ctrl and press C
0 Hold down Ctrl and press Break.
4. An application program can occasionally lock the computer,
making it unresponsive to keyboard commands. If your
computer does not respond when you type on the
keyboard, you can reset it. Follow the instructions in
Chapter 3.
5. If resetting the computer does not help, remove any diskettes,
turn off your system, wait 20 seconds, and turn it back on.
Then restart your application program.
If none of these solutions solve your software problem, contact
the software manufacturer for technical support.
Printer Problems
Below are some general steps to follow if you have difficulty
with your printer. If the problem persists and you need more
detailed information, check your printer manual.
If the the problem stems from the port to which your printer is
connected, you will see a port error message. See steps 5 and 6,
below, for more information about handling port difficulties.
6-18 Troubleshooting