User's Manual

Chapter 2
Running the SETUP Program
The SETUP program defines how your system is configured.
Although your system comes with the correct options
predefined, it is a good idea to verify these options by running
SETUP the first time you use your computer. You may also
need to run it again later if you change your configuration.
SETUP is stored in the computer’s read-only memory (ROM),
so you can run it any time you turn on or reset your system.
SETUP lets you verify or change the following:
0 Current date and time
0 Type of diskette drive(s) installed
0 Type of hard disk drive(s) installed
0 Type of video display adapter you are using
0 Processor speed
0 System booting sequence
0 Diskette drive seek test
0 System memory
0 Coprocessor support
0 Shadow ROM options
0 Keyboard options
0 Peripherals options
0 Password options.
Running the SETUP Program
2-1