User's Manual

If you do not press Delete within approximately five seconds,
the computer starts loading the operating system and you will
not be able to run SETUP. If this happens, reset the computer
and try again. See Chapter 3 if you need instructions for
resetting your computer.
When you press Delete, you’ll see a SETUP menu containing
these options:
1. Start operating system
2. Run SETUP
3. Set password options
4. Display system board help
5. Load default SETUP value
6. SAVE settings and exit
7. Exit without saving setting
Type the number of the menu option you want to select, or use
or to move the cursor over the option you want to select
and press Enter. As you highlight each menu selection, you’ll
see a description of the option at the bottom of the screen.
Entering SETUP Options
You can verify or change all SETUP functions except the
password options from menu option 2, Run SETUP. To select
this option, press & to highlight it, then press Enter. You see the
SETUP screen.
This screen displays the size of both the base and extended
memory and whether a math coprocessor is installed. You also
see a calendar for the current month at the bottom right of the
screen.
Additionally, this screen contains system parameters you can
change.
Running the SETUP Program 2-3