User's Manual

Setting the Diskette Drive(s)
Your system may have only one diskette drive installed or you
may have a second drive of a different size or capacity. SETUP
offers five possible selections for your diskette drives (A and B):
0 360KB, 5.25-inch
0 1.2MB, 5.25-inch
0 720KB, 3.5-inch
0 1.44MB, 3.5-inch
0 2.88MB, 3.5-inch
0 Not Installed.
Check the settings for both drives and correct them if
necessary. (If you have only one diskette drive or if you install
a drive that does not use the diskette drive controller (for
instance, an IDE or SCSI drive) in the lower bay, select Not
Installed for Diskette drive B.) If you install a
combination (dual) diskette drive, the top drive is A and the
bottom drive is B.
Setting the Hard Disk Drive(s)
The SETUP program lets you select the type of hard disk
drive(s) installed in your computer. If you have two hard disk
drives, the first one is C and the second one is D. Be sure to
choose the correct setting for both drives. Follow these
guidelines:
0 If you have only one hard disk drive, or if you installed a
second drive that doesn’t use the IDE controller, select
None for Hard disk D.
Running the SETUP Program 2-5