User's Manual

The first option allows you to shadow your video BIOS. Three
additional options allow you to shadow 32KB at the memory
addresses listed on the screen. You may want to enable one or
more of these shadow features if, for example, you are using
option cards that contain ROM; you can shadow the memory
on the card to your system’s RAM. Check the memory map on
page A-10 and the documentation that came with your option
card to determine which addresses your option card can access.
You may also need to set some switches or jumpers on the
option card.
Setting the Peripherals Options
The Peripherals setup option lets you change the settings
for the built-in interface ports and disk drive controllers. You
may need to change these settings if you install an interface on
an option card. The following table lists the possible settings.
2-12 Running the SETUP Program