User's Manual

Local Bus IDE Drivers
These drivers allow you to take advantage of the high-speed
local bus IDE interface on your computer, which provides
faster access to your hard disk drive. The drivers may already
be installed on your system. They can also be installed from the
Utility diskette.
Follow these steps to install the IDE drivers:
1. Insert the Utility diskette in drive A
2. From DOS, log onto drive A
3. Type the following and press Enter:
INSTALL2
4. Follow the instructions on the screen to install IDE drivers
for DOS and/ or Windows on your hard disk.
After installing the drivers, the system reboots.
Note
Although you can use the IDE drivers with any EPSON-
supplied hard disk, you may not be able to use them with
hard disk drives from other vendors. To take advantage of
the local bus IDE interface, your hard disk drive must
support a 32-bit data path that utilizes double-word I/O. See
the hardware specifications for your drive or contact the
vendor of the drive and request a product specification.
Using Your Computer 3-11