User's Manual

Installing a Hard Disk in the Vertical Bay
You should install your computer’s first hard disk drive in the
vertical drive bay. This section describes:
0 Removing the mounting frames from the hard disk drive (if
necessary)
0 Installing the hard disk drive in the vertical drive bay
0 Connecting the cables
Before you install a hard disk drive, be sure to check the
jumpers on the drive. For instructions, see page 5-4.
Removing the Mounting Frames
Your hard disk drive may have mounting frames attached to it,
as shown below. You need to remove these frames before you
can install the drive in the vertical bay.
Installing and Removing Drives 5-5