Installation guide

64
Depending on the video port you use, you may need to connect an audio cable in order to combine the picture
with sound. Connect the audio cable to one of the ports shown below:
If you’ve connected your video device using an HDMI cable, the audio signal is already carried by the cable, so
you won’t have to connect a separate audio cable. (Make sure HDMI audio is enabled in your component’s
setup menu.) Otherwise, make one of the audio connections listed below:
* Connection not required if your video device supports HDMI audio.
Linking Audio and Video Sources
Once you’ve connected the audio and video cables, you need to tell the Ensemble HD system which audio and
video ports to use together. You link the audio and video sources together using the Source Assign screen.
1 Make sure the MAIN menu is displayed on the remote control. If necessary, press the
MAIN button.
2 Point the remote control at the screen and press the
MENU button.
If you’ve connected to this video port... ...connect an audio cable to one of these ports
HDMI 1 or 2 Coaxial*
Optical*
Component Coaxial
Optical
Analog
S-Video Coaxial
Optical
Analog
CVBS (Composite video) Coaxial
Optical
Analog
HDMI audio/video portsCoaxial audio port
(digital audio)
Analog audio port
Optical audio port
(digital audio)