Quick Start Guide

R4C4450 Quick Reference
Rev.C
A5 size QUICK.FM
7/18/00 Pass 0
R
Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura _______
ABE J.Holmes _______
17
1717
17
Image Optimum There is insufficient memory to
print the page at the specified
print quality. The printer
automatically lowers the print
quality so that it can continue
printing. If the printout is not
acceptable, try simplifying the
page by limiting the number of
graphics or reducing the
number and sizes of fonts.
Turn off the printer then resend
the print data.
Turn the Image Optimum
setting off on the SelecType
Config menu
Insert Oil Roll The fuser oil roll is not installed.
Insert
Photocondctr
The photoconductor unit is not
installed, or is installed
incorrectly. Turn off the printer,
then install or reinstall the
photoconductor unit.
Insert Waste T Box The waste toner collector is not
installed.
Insert XXX
XXX:
The selected
paper source is
indicated.
The indicated (XXX) paper
source is open. Close it.
Messages Description
Invalid HDD A fatal error occurred on the
Hard Disk Drive. Replace with a
normal Hard Disk Drive.
Invalid PS3 A PostScript 3 ROM module
that cannot be used on this
printer is installed.
Irregular Density You have tried to print at an
overly high density. The printer
stops loading paper to prevent
printer damage. You must
clear jammed paper from the
MP tray or paper path unit.
Maintenance
Req XXXX
XXXX:
Any number is
indicated.
Some part inside the printer
should be replaced. Contact
your dealer and inform them of
the number (XXXX) that
appears.
Manual Feed
XXX YYYY
XXX:
The selected
paper source is
indicated.
YYYY:
The selected
paper size is
indicated.
The printer is waiting for media
to be inserted manually.
Messages Description