Quick Start Guide

L
Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura _______
ABE J.Holmes _______
R4C4450 Quick Reference
Rev.C
A5 size QUICK.FM
7/18/00 Pass 0
18
1818
18
Mem Overflow The printer has insufficient
memory to execute the
current task. To correct the
error, press the Continue
button on the control panel. If
the message remains, reset the
printer. You can also clear this
message by turning the printer
off, waiting 10 seconds, and
then turning it back on.
Menus Locked This message appears if you try
to change a printer setting
when the buttons have been
locked.
Need Memory The printer has insufficient
memory to execute the
current task. Expand printer
memory.
Oil Roll Near
Empty
There is very little oil remaining
in the fuser oil roll. Early
replacement with new fuser oil
roll is recommended.
Outbin Select
Error
Printouts are output not to the
specified Outbin but to
another bin due to a printing
restriction.
Messages Description
Paper Out XXX
YYYY
XXX:
The selected
paper source is
indicated.
YYYY:
The selected
paper size is
indicated.
There is no paper in the
specified paper source (XXX).
Load paper of the indicated
size (YYYY) into the source.
Paper Set XXX
YYYY
XXX:
The selected
paper source is
indicated.
YYYY:
The selected
paper size is
indicated.
The paper loaded in the
specified paper source (XXX)
does not match the required
paper size (YYYY). Replace the
loaded paper with the correct
size and press Continue.
If you press Continue without
replacing the paper, the
printer will print on the loaded
paper even though it does not
match the required size.
Paper Unit Open The paper path unit is open.
Close it.
Photocondctr
Trouble
The installed photoconductor
unit has a problem. Turn off the
printer, then remove the
photoconductor unit and
install the new
photoconductor unit.
Messages Description