User's Guide

Running a Printer Check
Running a printer check helps you determine if the printer is operating properly.
1. Make sure that the CD/DVD tray is not inserted in the product and the CD/DVD feed tray is closed.
2. Load a few sheets of plain paper in the product.
3. Turn off the product.
4. Disconnect any connected interface cables.
5. Hold down the paper/cancel button as you press the power button to turn the product back
on. Hold down both buttons until the power light begins to flash, then release the buttons.
The printer begins printing a nozzle check pattern.
6. Do the following, depending on the results of the printer check:
• If the page prints and the nozzle check pattern is complete, the printer is operating properly. Any
printing problem you may have could be caused by your computer, cable, software, or selected
113