User's Guide

Removing a Printed CD/DVD

After your CD/DVD is printed, the CD/DVD tray ejects partially from the product. Pull out the tray and

remove the disc. Then close the CD/DVD feed tray.

Note: If the CD/DVD tray gets any ink on it, immediately wipe it off.

After printing, handle the CD/DVD carefully. You may need to wait up to 24 hours for the ink to dry fully

before inserting it in a drive, depending on the type of disc you used. Keep printed discs away from

moisture and direct sunlight.

Caution: Do not turn off the product with the CD/DVD tray inserted in it. Always remove the tray first.

Store the CD/DVD tray flat. A warped or damaged CD/DVD tray may stop your product from operating

normally.

Parent topic: Printing on CDs/DVDs

Printing on CDs/DVDs from a Computer

Before printing directly on CDs or DVDs from your computer, make sure you have set up your product

and installed the EPSON Print CD software as described on the Start Here sheet.

Note: Use only an application that supports CD/DVD printing or ink may get on the CD/DVD tray or

inside your product. Check the CD/DVD package for any additional instructions.

Printing on a CD/DVD with Windows

Printing on a CD/DVD with Mac OS X

Parent topic: Printing on CDs/DVDs

Printing on a CD/DVD with Windows

You can print with your product using the EPSON Print CD software, as described in these sections.