Product Information Guide

EPSON EPL-N1200
2 - EPSON EPL-N1200
1/97
Paper types: Plain paper, recycled paper, labels,
envelopes, transparencies, colored paper,
card stock, letterhead
Note:
Use recycled paper under normal temperature and humidity conditions
only. Poor quality paper may reduce print quality or cause paper jams
and other problems.
Paper weight:
Plain paper 60 to 90 g/m
2
, 16 to 24 lb
Card stock 90 to 157 g/m
2
, 24 to 42 lb
Paper size:
Paper A4 (210 mm × 297 mm)
A5 (148 mm × 210 mm)
B5 (182 mm × 257 mm)
Letter (8.5 × 11 inches)
Half-Letter (5.5 × 8.5 inches)
Legal (8.5 × 14 inches)
Government Letter (8.5 × 10.5 inches)
Government Legal (8.5 × 13 inches)
Executive (7.25 × 10.5 inches)
F4 (210 mm × 330 mm)
Custom (92 ~ 216 mm × 148.5 ~ 356
mm)
Envelopes Monarch (3 7/8 × 7 1/2 inches)
Commercial 10 (4 1/8 × 9 1/2 inches)
DL (110 mm × 220 mm)
C5 (162 mm × 229 mm)
International B5 (176 mm × 250 mm)
C6 (114 mm × 162 mm)
Caution:
Only load paper sizes that are listed above.
Printable area: 95 dots from paper edge based on
600 dpi; varies depending on the
emulation mode
Environmental
Temperature: Operation: 50 to 95°F (10 to 35°C)
Storage: 32 to 95°F (0 to 35°C)
Humidity: Operation: 15 to 85% RH
Storage: 35 to 85% RH
Altitude: 8,200 feet (2,500 meters) maximum
Mechanical
Dimensions and weight:
Height: 10.4 inches (265 mm)
Width: 16.2 inches (411 mm)
Depth: 19.0 inches (484 mm)
Weight: 33.1 lb (15 kg) including the imaging
cartridge
Durability: 5 years or 300,000 sheets, whichever
comes first
Electrical
Interfaces
Parallel B Interface: IEEE 1284-I compliant
Parallel C Interface: IEEE 1284-II compliant
Using ECP Mode in Windows 95
To use the ECP mode with a Parallel C (IEEE 1284 level II
compliant) connector, your computer must support the ECP
mode.
Note:
The ECP mode is not available with Windows 3.1 and Windows NT.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program
that comes with your computer. (For details of the settings
and the program, see your computer manual.)
2. Click the Start button, point to Settings, and then click
Control Panel.
3. Right-click the System icon, and click Open in the menu
that appears.
4. Select the Device Manager tab.
5. Select the ECP Printer Port under Ports (COM & LPT),
then click the Properties button.
6. Select the Resources tab.
7. Make the appropriate setting in the Resource settings
dialog box. (This setting depends on your computer
system. For details, see your computer manual.)
8. Click OK to save the settings.
Optional Serial Interface
The printer’s optional serial interface can be set for either
RS-232C or current loop operation. The data format settings
can be changed using SelecType.
Specification 110 V model
Voltage 90 V to 132 V
Rated frequency 50 Hz to 60 Hz
±
3 Hz
Rated current 7 A
Power consumption Less than 900 W
Power consumption in Standby mode with no
options installed
Less than 30 W