User's Manual

Remember, your system already has 2MB of memory (consisting
of eight 256KB SIMMs) installed in hanks 0 and 1; so consider
this when you decide how much memory to add. Do not install
SIMMs in any other type of configuration than one of the types
shown in the table.
Once SIMMs have been installed in your computer, the DIP
switches on the main system hoard need to he set correctly so
that your computer knows it has the additional memory.
Usually, your dealer does this for you, hut you may want to
check the DIP switch settings to make sure they are correct. See
Appendix A for instructions.
After additional memory has been installed in your computer,
you need to run the Setup program on your Reference diskette
to set the computer’s memory configuration, as described in
Chapter 2. Also see “Post-installation Setup,” later in this
chapter.
5-4
Installing Options