User's Manual

Removing the Diskette Drive Protector Card
There is a protector card in the diskette slot of your 5 ¼-inch
diskette drive. This card is inserted at the factory to protect the
read/write heads in the drive. To remove it, turn the diskette
drive latch up until it is horizontal. This causes the card to pop
out slightly so you can pull it out of the slot, as shown below.
(If you have a second 5 ¼-inch diskette drive, be sure to remove
the card from that drive as well.)
Save the protector card and reinsert it whenever you move the
computer. If you don’t plan to use your computer for a week or
more, reinsert the card to help prevent dust from entering the
drive.
Setting Up Your System
1-3