User Manual

Note: The web setup and control features support Microsoft Internet Explorer 9.0 or later, and Safari on

networks that do not use a proxy server for connection. You cannot select all of the projector menu

settings or control all projector functions using a web browser.

Note: If you set Standby Mode to Communication On in the ECO menu, you can use a web browser to

select settings and control projection even if the projector is in standby mode.

1. Make sure the projector is turned on.

2. Start your web browser on a computer or device connected to the network.

3. Type the projector's IP address into the browser's address box and press the computer's Enter key.

You see the Web Control screen.