R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 FRONT.FM Pass 3 ® 24-Pin Dot Matrix Printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair FRONT.FM Pass 3 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 USERS.TOC Pass 3 Contents Getting to Know Your Printer Easy-to-Use Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Available Paper Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Printing on continuous paper . . . . . . . . . . . . . . . . . . . . . . . . . 4 Printing on single sheets . . . . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 USERS.TOC Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Chapter 2 Printing on Continuous Paper Setting the Paper Release Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Paper Thickness Lever . . . . . . . . . . . . . . . . . . . . . . . . . Using the Push Tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loading paper onto the push tractor . . . . . . . . . . . . . . . . . .
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 USERS.TOC Pass 3 Chapter 4 Using the Printer Software About Your Printer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Using the Printer Driver With Windows 95 and 98 . . . . . . . . . . . 4-3 Accessing the printer driver from Windows applications. . 4-3 Accessing the printer driver from the Start menu . . . . . . . . 4-5 Printer driver settings overview. . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 USERS.TOC Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Chapter 7 Troubleshooting Using the Error Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power supply problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single-sheet paper loading or feeding problems . . . . . . . .
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 USERS.TOC Pass 3 Appendix B Cleaning and Transporting the Printer Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Transporting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Appendix C Specifications Printer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Mechanical.
L R4C4620 Rev. C A5 size 3/29/00 USERS.TOC Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair EPSON Bulletin Board System . . . . . . . . . . . . . . . . . . . . . . . Internet URL http://www.epson.com.au . . . . . . . . . . . . . . Your dealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EPSON Helpdesk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For Singapore Users . . . . . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair COVER.FM Pass 3 Control Panel Buttons and Lights Font button Selects the font. See Chapter 5. Condensed button Turns on and off the condensed mode. Font lights Indicate which font is selected. Condensed light Lights up when the condensed mode is on. LF/FF button ● Feeds paper line by line when pressing shortly.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Getting to Know Your Printer Your EPSON® LQ-580/LQ-570e 24-pin dot matrix printer provides high-quality printing and great performance in a compact design. LQ-570e is the name used in the United States, Canada and Latin America.
L R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Easy-to-Use Features This section highlights some easy-to-use features that you’ll find helpful. ❏ Use the tear-off feature to save paper. If you load paper in the push tractor, you can use the tear-off feature to advance your continuous paper to the printer’s tearoff edge when you finish printing.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 ❏ Use the paper release lever to change the paper path without removing continuous paper from the push tractor. When using the paper release lever, you can easily switch to printing on single sheets without removing the continuous paper loaded in the push tractor. For more information, see Chapter 2.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair INTRO.FM Pass 3 Available Paper Paths Your printer provides a variety of paper paths for printing on continuous and single-sheet paper. As described below, paper can be fed into the printer from the top, front, bottom, or rear. You can select the paper path that best suits your current printing needs.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 INTRO.FM Pass 3 Using a pull tractor If you often print on thick or heavy continuous paper, such as multipart forms or continuous paper with labels, use a tractor in the pull position. The pull tractor provides you with the best paper jam prevention, and allows you to load continuous paper from the front, rear, or bottom of the printer.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair INTRO.FM Pass 3 You can also load continuous paper from the rear pull tractor position. rear Note: Paper loaded from the rear slot results in a curved paper path, which may affect loading performance, so use the front or bottom slot whenever possible.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Printing on single sheets You can load single sheets from the top or the front of the printer. You can load ordinary single sheets from either position, even with continuous paper already loaded in the push tractor. This section helps you determine which paper slot best suits your single-sheet printing needs. See Chapter 3 for paper loading instructions.
L R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Loading paper in the front slot You can load ordinary single sheets, single-sheet multipart forms, or postcards in the front slot. Note: Always use the front paper slot to load single-sheet multipart forms. Options Your printer comes with everything necessary to print on continuous paper and single sheets using a variety of paper paths.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Ribbon Cartridge Your printer uses the following ribbon cartridges: EPSON black ribbon cartridge #7753 EPSON film ribbon cartridge #7768 When printing becomes faint, you need to replace the ribbon cartridge. Genuine EPSON ribbon cartridges are designed and manufactured to work properly with your EPSON printer.
L R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair ❏ Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. ❏ Do not use a damaged or frayed power cord.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 INTRO.FM Pass 3 ❏ If you plan to use the printer in Germany, observe the following: To provide adequate short-circuit protection and overcurrent protection for this printer, the building installation must be protected by a 16 amp circuit breaker.
L R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair For United Kingdom Users Use of options Epson (UK) Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by Epson (UK) Limited. Safety information w Warning: This appliance must be earthed.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 INTRO.FM Pass 3 If damage occurs to the plug, replace the cord set or consult a qualified electrician. Replace fuses only with a fuse of the correct size and rating. How To Use Your Manuals This User’s Guide provides detailed information on setting up and using your printer. The Quick Reference Guide that also comes with the printer summarizes basic information on how to use the printer.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Chapter 1 1 Setting Up the Printer Unpacking the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Choosing a Place for the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Positioning the continuous paper supply . . . . . . . . . . . . . . . . 1-4 Installing or Replacing the Ribbon Cartridge . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Unpacking the Printer Besides this guide, your printer box should include an EPSON printer software CD-ROM, a Notice Sheet, and the following items: printer paper guide power cord ribbon cartridge Note: Depending on your printer model, the power cord may be permanently attached to the printer.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 You must remove all protective materials packed around and inside your printer before you set it up and turn on the power. Follow the directions on the Notice Sheet (packed with the printer) to remove these materials. Save all packing and protective materials in case you need to ship the printer in the future.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair ❏ Avoid electrical outlets controlled by wall switches or automatic timers. An interruption in power can erase information in the memory of your printer or computer. Also avoid outlets on the same circuit as large motors or other appliances that can cause voltage fluctuations.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Installing or Replacing the Ribbon Cartridge EPSON recommends the use of genuine EPSON black ribbon cartridges (#7753) or EPSON film ribbon cartridge (#7768). Products not manufactured by EPSON may cause damage to your printer not covered by warranties. w Warning: You will need to move the print head by hand to install or replace the ribbon cartridge.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 3. Lift the printer cover by its back edge and then pull it straight up and off. 4. Push up the tabs on each side of the paper tension unit and lift the unit up and off the printer. Store the paper tension unit in a safe place. Note: When the pull tractor is installed, it is not necessary to remove the paper tension unit.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 5. Make sure that the print head is not hot; if it is, let it cool for a few minutes before touching it. Then slide the print head to the middle of the printer by hand. 6. If a used ribbon cartridge is installed, grasp the cartridge by its handle and pull it straight up. Properly dispose of the used ribbon cartridge.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 7. Remove the new ribbon cartridge from the package. Turn the ribbon-tightening knob in the direction of the arrow to remove any slack in the ribbon. ribbon-tightening knob 8. Hold the ribbon cartridge by its handle and push it firmly down into position; then press on both ends of the cartridge to make sure the plastic hooks fit into the slots.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 9. Use a pointed object, such as a ball point pen, to guide the ribbon between the print head and ribbon guide. Turn the ribbon-tightening knob to help feed the ribbon into place. 10. Slide the print head from side to side to make sure it moves smoothly. Also check that the ribbon is not twisted or creased.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 11. To replace the paper tension unit, lower it onto the printer’s mounting pegs. Then press down both ends of the unit until it clicks into place. 12. Replace the printer cover by first inserting the front tabs into the slots on the printer and then lowering the cover into place. Push it down until it clicks.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 ❏ Print on ordinary paper only. ❏ Move the paper-thickness lever to the next lowest position. Attaching the Paper Guide To install the paper guide follow these steps: 1. Make sure the paper guide cover is open as shown below. Attach the paper guide by sliding the slots on the bottom of the paper guide over the printer's pegs. Then tilt the guide back until it stops.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 2. Close the paper guide cover. 1-12 Setting Up the Printer Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Plugging in the Printer 1 1. Make sure the printer is turned off. 2. Check the label on the back of the printer to make sure its voltage matches that of your electrical outlet. Also make sure the plug on your printer’s power cord matches your electrical outlet. w Warning: It is not possible to change the printer’s voltage.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Connecting the Printer to Your Computer Your printer has two separate interface connections: an IEEE-1284 compatible parallel interface and Type B optional interface. See “Optional interface cards” on page A-4 for more information.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 3. Squeeze the wire clips together until they lock in place on both sides of the connector. 4. If your cable has a ground wire, connect it to the printer’s ground connector as shown below. 5. Plug the other end of the cable into the computer. After you connect the printer to your computer, install the printer software as described in the next section.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Installing the Printer Software After you connect the printer to your computer, you need to install the software included on the EPSON printer software CDROM shipped with your printer. Your printer software includes: ❏ Printer driver The printer driver is the software that runs, or “drives,” your printer.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 ❏ If you wish to make a diskette version of the printer software on your CD-ROM, insert the CD and run the EPSETUP program. In the dialog box that appears, click the Driver disk creation utility button and follow the on-screen instructions.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Installing the printer software in Windows 3.1 or NT 3.5x Follow the steps below to install the printer software in Windows 3.1 or NT 3.5x systems. Note: Installing the printer software on Windows NT 3.5x may require network administration privileges. Ask your administrator for more information. 1. Make sure Windows is running and the Program Manager window is open. 2.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 6. When the installation is complete, click OK to exit the installation program. 1 The installation program automatically selects the LQ-580/LQ570e as the default printer for Windows applications. For information on opening and using the software, see Chapter 4, “Using the Printer Software.
L R4C4620 Rev. C A5 size 3/29/00 SETUP.FM Pass 3 1-20 Setting Up the Printer Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Chapter 2 Printing on Continuous Paper Setting the Paper Release Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Setting the Paper Thickness Lever . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Using the Push Tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Loading paper onto the push tractor. . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Setting the Paper Release Lever There are several ways you can load continuous paper in the printer, including the push tractor. Use the paper release lever to indicate the paper source you want to use, as described in the table below. Note: To decide which paper source and paper path best suits your printing needs, see “Available Paper Paths” on page 4.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 CONT.FM Pass 3 The table below describes each paper release lever position. Paper release lever position Description 2 Single-sheet position For loading single-sheet paper from the top or front slot. For information on loading single sheets, see Chapter 3. Push tractor position For loading continuous paper from the tractor installed in the push position.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Setting the Paper Thickness Lever Setting the paper thickness lever allows the printer to accommodate various thicknesses of paper. The paper thickness lever is located under the printer cover. You can select one of eight positions identified by the scale next to the lever.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Use the following table to set the paper thickness lever to match the thickness of your paper.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using the Push Tractor To use the push tractor, load continuous paper in the rear slot. For information on when to use the push tractor, see “Available Paper Paths” on page 4. Note: The tractor is installed in the push position when the printer is shipped. If a tractor is not installed in the push position, go to “Reinstalling the tractor in the push position” on page 2-13.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 To load paper onto the push tractor, follow these steps: 1. Make sure the printer is turned off. 2. Open the paper guide cover and remove the paper guide by holding both edges and lifting it up. 3. Set the paper release lever to the push tractor position. Set the paper thickness lever (located under the printer cover) to the proper position for your paper’s thickness.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair CONT.FM Pass 3 4. Release the left and right sprockets by pulling the sprocket lock levers forward. front of the printer 5. Slide the left sprocket to the left margin of the paper using the scale on the printer. (Printing starts at the “0” mark.) Then push the lever back to lock it in place.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 6. Slide the right sprocket to match the width of your paper, but do not lock it. Move the paper support midway between the two sprockets as shown in step 5. 7. Make sure your paper has a clean, straight edge. Then open both sprocket covers and fit the first three holes of the paper, printable side down, over the tractor pins. Then close the sprocket covers.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 10. Slide the edge guides to the middle of the paper guide. Then close the paper guide cover. 11. Turn on the printer. You may need to check and change the printer driver settings as described in Chapter 4. When the printer receives data, it automatically loads the paper and starts printing. The printed pages are fed over the paper guide toward the back of the printer. 12.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 CONT.FM Pass 3 Removing a printed document from the push tractor To remove the printed document, follow these steps: 1. Make sure the Tear Off/Bin lights are flashing. (This indicates your paper is at the current tear-off position.) You may need to press the Tear Off/Bin button. 2. Open the paper guide cover, and tear off the printed document using the tear-off edge of the paper tension unit.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair To feed continuous paper to the standby position where you can remove the paper, press the Load/Eject button. (See the Glossary for an explanation of the standby position.) Then open the sprocket covers of the tractor and remove the paper. c Caution: Always tear off your printed document before you press the Load/Eject button.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Reinstalling the tractor in the push position If a tractor is installed in the pull position, you need to remove it and install the paper tension unit as described on “Removing the pull tractor” on page 2-24 before using the push tractor. To reinstall the tractor in the push position, follow these steps: 1. Make sure the printer is turned off. 2.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using the Tractor in the Pull Position Using the tractor in the pull position is ideal for printing on thick and heavy continuous paper, such as multipart forms or continuous paper with labels. However, you cannot use the tearoff feature with the pull tractor.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 2. Push up the tabs on each side of the paper tension unit and lift the unit up and off the printer. Store the paper tension unit in a safe place. 2 3. Lower the tractor into the printer’s mounting slots and press down both ends of the tractor to make sure that it is firmly seated. You are now ready to load continuous paper onto the pull tractor as described in the next section.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Loading paper onto the pull tractor When using the pull tractor, load continuous paper in the front or bottom slot, if possible; loading paper in the rear slot may increase the chance of a paper jam. c Caution: Do not load continuous paper with labels in the rear paper slot; the labels may come off their backing sheet inside the printer and cause a paper jam.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 4. Release the left and right sprockets by pulling the sprocket lock levers forward. 2 5. Slide the left sprocket to the left margin of the paper using the scale on the paper guide as a guide. (Printing starts at the arrow mark.) Then push the lever back to lock it in place.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 6. Slide the right sprocket to match the width of your paper, but do not lock it. Move the paper support midway between the two sprockets as shown in step 5. 7. Make sure your paper has a clean, straight edge. Then open both sprocket covers. 8. Insert the paper into the front, bottom, or rear paper slot as described below until it emerges between the platen and the ribbon guide.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 9. Fit three holes on each side of the paper over the tractor pins on both sprockets. Then close the sprocket covers. 10. Slide the right sprocket to remove any slack in the paper, then lock it in place by pushing the sprocket lock down. 11. If you use the front slot, attach the front cover with the continuous paper positioned as shown below. Then close it. 12.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 14. Remove any slack in the paper and adjust the top-of-form position (the position where the printer will start printing) by pressing the LF/FF button or using the micro adjust feature. (To use the micro adjust feature, see “Adjusting the Top-ofForm Position” on page 2-31.) The printer will start printing at the current position without advancing the paper.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 17. After you finish printing, open the paper guide cover; then tear off the printed document at the perforation nearest the paper exit slot. 2 Removing the paper from the pull tractor 1. After you finish printing, tear off the supply of paper at the perforation nearest the paper entry slot. 2. To eject the paper, hold down the LF/FF button.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using two tractors in the push/pull combination To improve continuous paper feeding and reduce paper jams, you can use two tractors at the same time. When using two tractors in combination, you can load paper in the rear paper slot onto both the push tractor and the pull tractor.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 7. Set the paper release lever to the pull tractor position. Then remove any slack in the paper between the push and pull tractor using the micro adjust feature (described on “Adjusting the Top-of-Form Position” on page 2-31.) if necessary. 8. Move the paper release lever back to the push tractor position you set in step 2. 9.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 13. After you finish printing, open the paper guide cover; then tear off the printed document at the perforation nearest the paper exit slot. To remove the paper from the tractor, follow the steps under “Removing the paper from the pull tractor” on page 2-21. Removing the pull tractor To remove the tractor from the pull position, follow these steps: 1.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 4. Store the tractor in a safe place, or install it in the push position as described on “Reinstalling the tractor in the push position” on page 2-13. 5. To replace the paper tension unit, lower it onto the printer’s mounting pegs. Then press down both ends of the unit until it clicks into place. 6. Replace the paper guide and the printer cover. Then close the paper guide cover.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Loading Multipart Forms You can use carbonless multipart forms of up to five parts (four copies in addition to the original). Make sure you set the paper thickness lever to the proper position based on the number of layers in your form. For best results with thick paper, such as multipart forms, select a straight or almost straight paper path.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 CONT.FM Pass 3 Loading Continuous Paper With Labels When printing on labels, use only the type of labels that are mounted on continuous backing sheets with sprocket holes for use with a tractor feeder. Do not try to print on single sheets with labels because the printer may not feed labels on a shiny backing sheet properly.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Removing continuous paper with labels To avoid peeling labels off the backing sheet and jamming the printer, follow the steps below when you remove continuous paper with labels from the printer. 1. Tear off the supply of continuous labels at the perforation nearest the paper entry slot. 2. Hold down the LF/FF button to eject the remaining labels from the printer.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Switching Between Printing on Continuous Paper and Printing on Single Sheets You can easily switch back and forth between printing on continuous paper with the push tractor and printing on single sheets without having to remove or reload the continuous paper.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Switching to printing on continuous paper To switch from printing on single sheets to printing on continuous paper with the push tractor, follow these steps: 1. If a single sheet remains in the printer, press the Load/Eject button to eject it.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Adjusting the Top-of-Form Position The top-of-form position is the position on the page where the printer starts printing. If your printing appears too high or low on the page, you can use the micro adjust feature to adjust the topof-form position.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 5. Press the LF/FF D button to move the top-of-form position up on the page, or press the Load/Eject U button to move the top-of-form position down on the page. c Caution: Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 To adjust the top-of-form position for continuous paper loaded on the pull tractor, see the following example: First mark a point 6.5 mm (0.26 inch) above the paper’s perforation; then position the paper so that the mark is even with the top edge of the plastic ribbon cover. This gives you an 8.5 mm (0.33 inch) margin on the next page, meaning the printer starts printing 8.5 mm (0.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Advancing the Paper to the Tear-Off Edge If you use the push tractor, you can use the tear-off feature to advance your continuous paper to the printer’s tear-off edge when you finish printing. You can then easily tear off the printed document.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 CONT.FM Pass 3 Advancing the paper to the tear-off position automatically To automatically advance your printed documents to the tear-off position, you need to turn on the auto tear-off mode and select the appropriate page length for continuous paper in the defaultsetting mode. For instructions, see “Changing default settings” on page 5-10.
L R4C4620 Rev. C A5 size 3/29/00 CONT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 4. Press the LF/FF D button to feed the paper backward, or press the Load/Eject U button to feed the paper forward, until the paper perforation is aligned with the tear-off edge. tear-off edge Note: The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position beyond these limits, the printer beeps and stops moving the paper. 5.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Chapter 3 Printing on Single Sheets Using Single Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Available paper types and paper slots . . . . . . . . . . . . . . . . . . 3-2 Loading single-sheet multipart forms . . . . . . . . . . . . . . . . . . . 3-4 Loading envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using Single Sheets Available paper types and paper slots As shown below, you can load single-sheet paper one sheet at a time using the paper guide on top of the printer or the front cover. You can print on ordinary single sheets, single-sheet multipart forms, postcards, and envelopes. Your single-sheet paper may be from 100 to 257 mm (3.9 to 10.1 inches) wide.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SINGLE.FM Pass 3 The table below shows the types of paper you can load in the top and front paper slots and the paper thickness lever setting for each paper type. For more information on the paper thickness lever, see “Setting the Paper Thickness Lever” on page 2-4.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SINGLE.FM Pass 3 Loading single-sheet multipart forms You can load single-sheet multipart forms in the front paper slot only, as described in “Loading Single Sheets in the Front Paper Slot” on page 3-11. Be sure to follow these guidelines: ❏ Use only carbonless multipart forms bound as shown below.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 ❏ Before printing, set the paper thickness lever (located under the printer cover) to the proper position for your paper. See the table on page 3-3, for details. ❏ Be sure your multipart forms do not exceed 0.39 mm (0.015 inch) in thickness.
L R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Use envelopes only under normal temperature and humidity conditions, as follows: c Temperature 15 to 25 °C (59 to 77 °F) Humidity 30 to 60% RH Caution: Because printing on the edge of an envelope may damage the print head, make sure the printing stays entirely within the printable area of your envelopes. See Appendix C for details on the printable area of envelopes.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 ❏ Set the paper thickness lever (located under the printer cover) to position 2. ❏ Before printing, turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on. After you finish printing on postcards, press the Tear Off/Bin button once to exit the card mode. (Bin 1 of the optional cut-sheet feeder is selected.
L R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Loading Single Sheets in the Top Paper Slot To load paper in the top slot, follow these steps: 1. Make sure the paper guide is installed properly. If not, attach it as described on “Attaching the Paper Guide” on page 1-11. 2. Slide the left edge guide until it locks in place next to the arrow on the paper guide. Next adjust the right edge guide to match the width of your paper.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 3. Set the paper release lever to the single-sheet position. Also set the paper thickness lever (located under the printer cover) to the proper position for your paper’s thickness. (See the table on page 3-3.) 3 4. Close the paper guide cover. 5. Turn on the printer, if necessary.
L R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 6. Insert a sheet of paper, printable side down, between the edge guides until it meets resistance. The printer feeds the paper automatically and is ready to print. Note: The time from when the paper is inserted until it feeds can be set with the default-setting mode's Manual feed time. For instructions, see “Changing default settings” on page 5-10. 7.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Loading Single Sheets in the Front Paper Slot To load paper in the front paper slot, follow these steps: 1. Make sure the paper guide is installed properly. If not, attach it as described on “Attaching the Paper Guide” on page 1-11. 2. Make sure the paper guide cover is closed. 3. If the front cover is closed, open it by pulling the tabs at both ends of the cover.
L R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 4. Set the paper release lever to the single-sheet position. Also set the paper thickness lever (located under the printer cover) to the proper position for your paper’s thickness. (See the table on page 3-3.) 5. Turn on the printer, if necessary.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 6. Making sure it is aligned with the edge guide, load the paper, printable side up, until it meets resistance. The printer feeds the paper automatically and is ready to print. 3 Note: The time from when the paper is inserted until it feeds can be set with the default-setting mode's Manual feed time. For instructions, see “Changing default settings” on page 5-10. 7.
L R4C4620 Rev. C A5 size 3/29/00 SINGLE.FM Pass 3 3-14 Printing on Single Sheets Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Chapter 4 Using the Printer Software About Your Printer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Using the Printer Driver With Windows 95 and 98 . . . . . . . . . . . . 4-3 Accessing the printer driver from Windows applications. . . 4-3 Accessing the printer driver from the Start menu . . . . . . . . . 4-5 Printer driver settings overview. . .
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair About Your Printer Software The EPSON printer software that comes with your printer includes the printer driver software, the EPSON Remote! utility, and the EPSON Status Monitor 3 utility for Windows 95, 98 and NT 4.0. As described in Chapter 1, a printer driver is software that allows your computer to control the printer.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Using the Printer Driver With Windows 95 and 98 You can access the printer driver from your Windows applications or from the Start menu. When you access the printer driver from a Windows application, any settings you make apply only to the application you are using. See “Accessing the printer driver from Windows applications” below.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 1. Select Print Setup or Print from the File menu of your application software. The Print or Print Setup dialog box appears. 2. Make sure that your printer is selected and then click Printer, Setup, Properties, or Options. (You may need to click a combination of these buttons.) The Properties window appears, and you see the Paper, Graphics, and Device Options menu.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 3. To view a menu, click the corresponding tab at the top of the window. See “Printer driver settings overview” below for detailed information about the settings. Accessing the printer driver from the Start menu To access the printer driver from the Start menu, follow these steps: 1. Click the Start button, and then point to Settings. 4 2. Click Printers. 3.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Paper menu 4-6 ❏ Paper size Select the size of the paper you want to use. If you don’t see your paper size, use the scroll bar to scroll through the list. If your paper size is not included in the list, click Custom and enter the paper size in the dialog box that appears. ❏ Orientation Select Portrait or Landscape. ❏ Paper source Click the paper source you want to use.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Graphics menu 4 ❏ Resolution Click the printing resolution you want. The higher the resolution you select, the more detailed your printout will be; however, increasing the resolution slows printing. ❏ Dithering You can leave this option set to Fine, which is the default setting, or select another dithering pattern depending on the kind of printout you want.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SOFTWARE.FM Pass 3 Device Options menu ❏ Print quality Select a print quality option from the Print quality list. If you turn on Hi-speed, you will enter bi-directional printing mode and printing speed will increase. Turning Hi-speed off will return the printer to uni-directional printing mode. Printing speed will decrease, but printing precision will improve.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SOFTWARE.FM Pass 3 Utility menu To use the utilities, click the Utility tab in the printer software window, then click the button for the utility you want to use. 4 ❏ EPSON Status Monitor 3 You can access EPSON Status Monitor 3 when you click this button. Whenever you monitor the printer, make sure there is a checkmark in the Monitor the printing status check box.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 ❏ Monitoring Preferences 4-10 Using the Printer Software Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Click this button to open the Monitoring Preferences dialog box where you can make settings for EPSON Status Monitor 3.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 You can change the following settings: Select Notification Displays the error item check box ON/OFF status. Select Shortcut icon The selected icons are displayed in the task tray on the PC screen. The setting example is shown on the right window. By clicking the shortcut icon, you can access the Monitoring Preferences dialog easily.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using the Printer Driver With Windows 3.1 You can access the printer driver from your Windows applications or from the Control Panel. When you access the printer driver from a Windows application, any settings you make apply only to the application you are using. See “Accessing the printer driver from Windows applications,” below.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 1. Select Print Setup or Print from the File menu of your application software. The Print or Print Setup dialog box appears. See “Printer driver settings overview” on page 4-14 for detailed information about the settings in this dialog box. 4 2. Make sure that your printer is selected and then click Printer, Setup, or Options.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SOFTWARE.FM Pass 3 Accessing the printer driver from the Control Panel To access the printer driver from the Control Panel, follow these steps: 1. In the Main window, double-click the Control Panel icon. 2. Double-click the Printers icon. The Printers dialog box appears. 3. Make sure your printer is highlighted, then click Setup. The Print Setup dialog box appears.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 ❏ Paper Size Select the size of the paper you want to use. If you don’t see your paper size, use the scroll bar to scroll through the list. If your paper size is not included in the list, click User Defined Size and enter the paper size in the dialog box that appears. ❏ Paper Source Click the paper source you want to use.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using the Printer Driver With Windows NT 4.0 You can access the printer driver from your Windows applications or from the Start menu. When you access the printer driver from a Windows application, any settings you make apply only to the application you are using. See “Accessing the printer driver from Windows applications” below.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 1. Select Print Setup or Print from the File menu of your application software. The Print or Print Setup dialog box appears. 4 2. Make sure that your printer is selected and then click Printer, Setup, Properties, or Options. (You may need to click a combination of these buttons.) The Document Properties window appears, and you see the Page Setup and Advanced menus.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 3. To view a menu, click the corresponding tab at the top of the window. See “Printer driver settings overview” below, for detailed information about the settings. Accessing the printer driver from the Start menu To access the printer driver from the Start menu, follow these steps: 1. Click the Start button, and then point to Settings. 2. Click Printers. 3.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Page Setup menu 4 ❏ Paper Size Select the size of the paper you want to use from the Paper Size list. ❏ Paper Source Select the paper source you want to use from the Paper Source list. ❏ Orientation Select Portrait or Landscape.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Advanced menu 4-20 ❏ Paper/Output Check the Paper Size, Orientation, and Paper Source settings you made on the Page Setup menu and change them if necessary. Select the setting and then choose an option from the Change Setting list box. ❏ Graphic Select Resolution and then choose the printing resolution from the Change Setting list box.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 ❏ Document Options Double-click Halftone Color Adjustment to open the Halftone Color Adjustment dialog box. Click Print Quality to select a Print quality option. Click Print Text as Graphics or Metafile Spooling and select On or Off in the Change Setting list box. ❏ Print quality Select a print quality option from the Print quality list.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SOFTWARE.FM Pass 3 Utility menu To use the utilities, click the Utility tab in the printer software window, then click the button for the utility you want to use. If you are using NT 4.0, you can open the printer software window by selecting Properties from the printer folder. ❏ EPSON Status Monitor 3 4-22 You can access EPSON Status Monitor 3 when you click this button.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SOFTWARE.FM Pass 3 Note: This utility is available only when: ❏ The printer is connected directly to the host computer via the parallel port [LPT1]. ❏ Your system is configured to support bidirectional communication. ❏ Monitoring Preferences Click this button to open the Monitoring Preferences dialog box where you can make settings for EPSON Status Monitor 3.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SOFTWARE.FM Pass 3 You can change the following settings: Select Notification Displays the error item check box ON/OFF status. Select Shortcut icon The selected icons are displayed in the task tray on the PC screen. The setting example is shown on the right window. By clicking the shortcut icon, you can access the Monitoring Preferences dialog easily.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Using the Printer Driver With Windows NT 3.5x You can access the printer driver from your Windows applications or from the Control Panel. When you access the printer driver from a Windows application, any settings you make apply only to the application you are using. See “Accessing the printer driver from Windows applications” below.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 1. Select Print Setup or Print from the File menu of your application software. The Print or Print Setup dialog box appears. 2. Make sure that your printer is selected and then click Printer, Setup, Properties, or Options. (You may need to click a combination of these buttons.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 3. Click Options (or a similar button) to view the Advanced Document Properties dialog box, which includes the Graphics Resolution, Color, and Optimizations printer driver settings. See “Document Properties dialog box” on page 4-28 for detailed information about these settings.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SOFTWARE.FM Pass 3 4. Click Options to open the Advanced Document Properties dialog box, which contains the Graphics Resolution, Color, and Optimizations printer driver settings. See “Printer driver settings overview” on page 4-28 for detailed information about these settings.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Advanced Document Properties dialog box ❏ Graphics Resolution Select a printing resolution option from the Graphics Resolution list. The higher the resolution you select, the more detailed your printout will be; however, increasing the resolution slows printing. ❏ Color Only monochrome printing is available.
L R4C4620 Rev. C A5 size 3/29/00 SOFTWARE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using the EPSON Remote! Utility The EPSON Remote! utility allows you to easily change the printer’s default settings from your computer’s DOS prompt. Installing EPSON Remote! Follow the steps below to install EPSON Remote! 1. Insert the printer software CD-ROM in a disk drive. 2. At the DOS prompt, type D:\SETUP.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 Chapter 5 Changing Printer Settings From the Printer’s Control Panel Selecting a Built-In Font and Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 About Your Printer’s Default Settings . . . . . . . . . . . . . . . . . . . . . . . 5-4 Changing default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Selecting a Built-In Font and Pitch Your printer comes with the twelve built-in fonts shown in the table below. You can also change the pitch by turning the condensed mode on or off. You can select the font and pitch using the buttons on the printer’s control panel as described below.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 CHANGE.FM Pass 3 Follow these steps to select a built-in font or pitch using the buttons on the printer’s control panel: 1. Make sure that the printer is not printing. If it is, wait until printing has finished. 2. To select a font, press the Font button until the three Font lights indicate the font you want as shown below.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair CHANGE.FM Pass 3 About Your Printer’s Default Settings The default settings control many printer functions. While you can often set these functions through your software or printer driver, you may sometimes need to change a default setting from the printer’s control panel using the default-setting mode.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CHANGE.
L R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Skip over perforation This feature is available only when continuous paper is selected. When you select On, the printer provides a one-inch (25.4 mm) margin between the last line printed on one page and the first line printed on the next page.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 When set to Auto, the printer analyzes the data and uses unidirectional printing for any lines which require vertical printing alignment. Software When you select ESC/P2, the printer operates in the EPSON ESC/ P2 mode. When you select IBM 2390 Plus, the printer emulates an IBM printer. 0 slash The zero character has a slash (0) when this feature is on.
L R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Auto I/F (interface) wait time This setting takes effect only if an optional interface is installed and the auto interface mode is selected. This setting determines how long the printer waits when it no longer receives data from an interface before it checks whether a print job is being sent through the other interface.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 International character set for Italic table You can select among several international character sets for the Italic character table. Each character set contains eight characters that vary depending on the country or language, so you can customize the Italic table to suit your printing needs. See Appendix C for character samples.
L R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Changing default settings Follow the steps on the next page to enter the default-setting mode and change the printer’s default settings. Note: ❏ To print the language selection and default-setting mode instructions, you need five sheets of A4 or letter size single-sheet paper, or five pages of continuous paper that is at least 279 mm (11 inches) long and 210 mm (8.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 4. Press the Tear Off/Bin button to print the default-setting mode instructions (four pages) in the language you selected. The printed instructions list the default settings you can change, describe how to change them, and show you how the control panel lights help you make settings.
L R4C4620 Rev. C A5 size 3/29/00 CHANGE.FM Pass 3 5-12 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 MONITOR3.FM Pass 3 Chapter 6 Using EPSON Status Monitor 3 About the EPSON Status Monitor 3 Utility . . . . . . . . . . . . . . . . . . . 6-2 Accessing EPSON Status Monitor 3. . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 MONITOR3.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair About the EPSON Status Monitor 3 Utility The EPSON Status Monitor 3 utility comes with your printer but is available only when using Windows 95, 98, or NT 4.0. It allows you to monitor your printer’s status, alerts you when printer errors occur, and provides troubleshooting instructions when needed.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 MONITOR3.FM Pass 3 Printer Status window To get more detailed information on printer status, you can access Status Monitor 3 from the printer software window. Click the Utility tab, then click EPSON Status Monitor 3. If you access the Printer Status window as described above, the following window appears. 6 You can view the following information in the Printer Status window.
L R4C4620 Rev. C A5 size 3/29/00 MONITOR3.FM Pass 3 6-4 Using EPSON Status Monitor 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Chapter 7 Troubleshooting Using the Error Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Power supply problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Single-sheet paper loading or feeding problems . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair TRBLE.FM Pass 3 Using the Error Indicators You can identify many common printer problems using the lights on the control panel. If your printer stops working and one or more control panel lights are on or flashing or the printer beeps, use the following table to diagnose and fix the problem. If you can’t fix your printer problem using this table, go to the next section.
State of panel lights R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 Beep pattern TRBLE.FM Pass 3 Problem Solution f Paper Out n Pause ••• Continuous paper is not fed to the standby position. Tear off the printed document at the perforation; then press the Load/Eject button. The printer feeds the paper to the standby position. Press the Pause button to turn off the Pause light. ••• A single sheet of paper is not fully ejected.
L R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Problems and Solutions Most printer problems are easy to solve. Use the information in this section to find the source of and solution to any printer problems that occur. Determine the type of problem that occurred, and see the appropriate page below: Power supply problems. . . . . . . . . . . . . . . . . . . page 7-5 Single-sheet paper loading or feeding problems . . . . . . . .
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Power supply problems The control panel lights come on briefly, but then go off and stay off. Cause What to do The printer’s voltage rating does not match the voltage of your electrical outlet. Check the printer and the outlet voltage ratings. If the voltages do not match, unplug the printer immediately and contact your dealer.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair TRBLE.FM Pass 3 Single-sheet paper loading or feeding problems The printer does not load single-sheet paper or does not feed it properly. Cause What to do The paper release lever is set to a tractor position. Set the paper release lever to the single-sheet position. For more information on setting the paper release lever, see Chapter 2. Continuous paper is in the paper path.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 The printer does not fully eject a single sheet. Cause What to do Your paper is too long. Press the Load/Eject button to eject the sheet. Make sure the page length of your paper is within the range specified for single-sheet paper in Appendix C. Also check and adjust the paper size setting in your application or printer driver.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair TRBLE.FM Pass 3 Continuous paper loading or feeding problems The printer does not load continuous paper or does not feed it properly. Cause What to do The paper release lever is not set correctly. Set the paper release lever to the tractor position for the paper source you want to use. For more information on setting the paper release lever, see Chapter 2.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 TRBLE.FM Pass 3 Wrong top-of-form position Printing starts too high or low on the page. Cause What to do The paper size setting in your application software or printer driver does not match the size of the paper you are using. Check the paper size setting in your application or printer driver.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair TRBLE.FM Pass 3 Wrong tear-off position The printer prints on (or too far away from) the perforation of your continuous paper. Cause What to do The tear-off position setting is incorrect. Adjust the tear-off position using the micro adjust feature. See “Adjusting the tear-off position” on page 2-35. You moved the paper using the knob while the printer was on.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Printing or printout quality problems The printer does not print when the computer sends data. Cause What to do The printer is paused. Press the Pause button. The interface cable is not plugged in securely. Check that both ends of the cable between the printer and the computer are plugged in securely.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair TRBLE.FM Pass 3 The printout is faint. Cause What to do The paper thickness lever is set incorrectly for your paper. Move the paper thickness lever to a lower setting. The ribbon is worn out. Replace the ribbon cartridge as described in Chapter 1. The printout has gaps. Cause What to do The paper thickness lever is not set correctly.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Lines of dots are missing in the printout. Cause What to do The print head is damaged. Stop printing and contact your dealer to have the print head replaced. c Caution: Never replace the print head yourself; you may damage the printer. Other parts of the printer must also be checked when the print head is replaced. All the text is printed on the same line.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair TRBLE.FM Pass 3 The skip over perforation setting is on. Turn off the skip over perforation setting in the default-setting mode or the EPSON Remote! utility. See “About Your Printer’s Default Settings” on page 5-4 or “Using the EPSON Remote! Utility” on page 4-30. The printer prints strange symbols, incorrect fonts, or other inappropriate characters.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Software settings override settings you make using the default-setting mode, EPSON Remote!, or the control panel buttons. R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Use your application software to select the font. Vertical printed lines are not aligned. Cause What to do Bidirectional printing, which is the printer’s standard printing mode, is out of alignment.
L R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Clearing Paper Jams To clear a paper jam, follow these steps: 1. Turn off the printer. 2. If a single sheet of paper is stuck on the paper guide, gently remove it. 3. Remove the printer cover. If continuous paper from the rear slot is loaded in the printer, remove the paper guide. 4.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Aligning Vertical Lines in Your Printout If you notice that the vertical lines in your printout are not properly aligned, you can use the printer’s bidirectional adjustment mode to correct this problem.
L R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Printing a Self Test Running the printer’s self test helps you determine whether the printer or the computer is causing the problem: ❏ If the self test results are satisfactory, the printer is working properly and the problem probably results from your printer driver settings, application settings, computer, or interface cable. (Be sure to use a shielded interface cable.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 After a few seconds, the printer loads the paper automatically and begins printing a self test. A series of characters is printed. Note: To temporarily stop the self test, press the Pause button. To resume the test, press the Pause button again. 3. To end the self test, press the Pause button to stop printing and the Load/Eject button to eject the printed page.
L R4C4620 Rev. C A5 size 3/29/00 TRBLE.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 2. To enter hex dump mode, hold down both the LF/FF and Load/Eject buttons while you turn on the printer. 3. Open a software program and send a print job to the printer. Your printer prints all the codes it receives in hexadecimal format. If characters are printable, they appear in the right column as ASCII characters.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Appendix A Enhancing Your Printer With Options Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Paper handling options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Optional interface cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Using the Optional Cut-Sheet Feeders . . . .
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Options The following table shows the paper handling options and interface cards available for your printer. To purchase options, contact your dealer or customer support as described in Appendix D. Paper handling options High-capacity cut-sheet feeder (C80638✽ ✽) Feeds up to 150 sheets of paper or 25 plain bond envelopes into the printer without reloading.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 OPTIONS.FM Pass 3 Additional tractor unit (C80020✽ ✽) This option is available because using two tractors in combination improves continuous paper handling and reduces the chances of paper jams. This printing method is especially useful for printing on continuous multipart forms. For instructions on using this option, see “Using the Tractor in the Pull Position” on page 2-14.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair OPTIONS.FM Pass 3 Optional interface cards You can install an optional interface card to supplement your printer’s built-in parallel interface and provide added network compatibility. The EPSON interface cards in the table below are compatible with your printer. (Not all the interfaces in the table are available worldwide.) See “Installing an Interface Card” on page A-29 for instructions.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Using the Optional Cut-Sheet Feeders Two types of optional cut-sheet feeders are available for use with your printer: the single-bin cut-sheet feeder (C80637✽) and the high-capacity cut-sheet feeder (C80638✽). You can use either one of these separately, or you can use both feeders together as a double-bin cut-sheet feeder to automatically load two different types of paper.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Installing an optional cut-sheet feeder You install the single-bin, high-capacity, and double-bin cut-sheet feeders in the same way. Follow the steps in this section. Note: Before you install the double-bin cut-sheet feeder, you need to assemble it as described on “Assembling the double-bin cut-sheet feeder” on page A-16. 1. Make sure the printer is turned off.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 OPTIONS.FM Pass 3 2. Holding the cut-sheet feeder in both hands, press down on the latch levers and fit the notches over the printer’s mounting posts, as shown below. Release the latch levers to lock the feeder in place.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 3. To replace the printer cover, first insert the front tabs into the slots on the printer, then lower the cover into place. If you installed the double-bin cut-sheet feeder, you need to select your paper path (bin 1 or bin 2). See “Selecting your paper path (bin 1 or bin 2)” on page A-17.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 OPTIONS.FM Pass 3 2. Slide the left paper guide of the cut-sheet feeder so it is aligned with the triangle mark. Next, slide the right paper guide to roughly match the width of your paper. Slide the paper support midway between the paper guides. paper guides of the cut-sheet feeder paper support 3.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 5. Take a stack of paper (up to 50 sheets) and fan it. Next, tap the side and bottom edges of the paper on a flat surface to even up the stack. 6. Insert the paper stack printable side down along the left paper guide. 7. Adjust the right paper guide so that it matches your paper’s width. Make sure the position of the guide allows the paper to move up and down freely. 8.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 9. Attach the stacker-support wires to the paper guide as shown below, if necessary. 10. Install the paper guide with the attached stacker-support by fitting the notches on the paper guide straight down over the mounting posts on the printer. Slide the edge guides to the middle of your paper. A The cut-sheet feeder automatically loads paper when the printer receives data.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair If the first line on your page appears too high or low, you can fix this by adjusting the top-of-form position using the micro adjust feature. See “Adjusting the Top-of-Form Position” on page 2-31. Loading paper in the high-capacity cut-sheet feeder The high-capacity cut-sheet feeder holds up to 150 sheets of paper or up to 25 envelopes.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 2. Pull the lock levers on the edge guides forward to release them. 3. Slide the left paper guide until it is aligned with the triangle mark; then lock it in place by pushing back its lock lever. Next, slide the right paper guide to roughly match the width of your paper. Slide the paper support to midway between the paper guides.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 4. Pull both paper set levers forward until the paper guides retract and lock open to allow paper loading. 5. Open the paper guide cover. 6. Take a stack of paper (up to 150 sheets) and fan it. Next, tap the side and bottom edges of the paper on a flat surface to even up the stack. 7. Insert the paper stack, printable side down, along the left paper guide.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 8. Adjust the right paper guide so that it matches your paper’s width and lock it in place. Make sure the position of the guide allows the paper to move up and down freely. If you are loading envelopes, push back the envelope levers as shown below. 9. Push back the paper set levers to clamp the paper or envelopes against the guide rollers.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Assembling the double-bin cut-sheet feeder Using the double-bin cut-sheet feeder allows you to load two different types of paper automatically. Before you install the double-bin cut-sheet feeder, you need to connect the single-bin cut-sheet feeder (C80637✽) to the high-capacity cut-sheet feeder (C80638✽). 1.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 3. Lock the two cut-sheet feeders together by pushing firmly on the tab locks. To install the double-bin cut-sheet feeder on your printer, see “Installing an optional cut-sheet feeder” on page A-6.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair It is best to select the paper path in your application program because software settings usually override the printer’s control panel settings. However, if you cannot select the paper path in your application, select a path by pressing the Tear off/Bin button until the light indicates the bin you want as shown below. ■ ❑ : bin 1 (high-capacity cut-sheet feeder) is selected.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Switching to single-sheet paper in the cut-sheet feeder 1. If any continuous paper remains in the printer, press the Tear Off/Bin button to advance the paper to the tear-off position. Then tear off the printed pages. c Caution: Tear off any printed documents before pressing the Load/Eject button in the next step. Reverse feeding several pages at a time may cause a paper jam.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Using the Roll Paper Holder The optional roll paper holder (#8310) allows you to use 8.5-inch roll paper like that used with telex machines. This provides an inexpensive alternative to using continuous paper for applications that require variable paper lengths. Before you install and use the roll paper holder, you need to assemble it.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 OPTIONS.FM Pass 3 3. Hook the tension lever onto both ends of the stand as shown below. While pulling up the tension lever, fit the wire ends of the tension lever into the holes in the stand. The roll paper holder is assembled. tension lever Installing the roll paper holder To install the roll paper holder, follow the steps below. 1. Make sure the printer is turned off. 2.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair To remove the roll paper holder, carefully lift up the printer and pull out the roll paper holder from beneath the printer. Loading roll paper After you install the roll paper holder, follow the steps below to load a roll of paper, 1. Make sure the printer is turned off. Open the paper guide cover and remove the paper guide. 2. Make sure the paper tension unit is installed. 3.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 7. Place the shaft and paper roll on the roll paper holder so the paper feeds from the bottom of the roll. 8. Turn on the printer. Bring the leading edge of the paper up over the push tractor and insert it until it meets resistance. The printer loads the roll paper automatically. 9. Replace the paper guide and close the paper guide cover. You are now ready to print.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair When you finish printing, open the paper guide cover and press the LF/FF button to advance the paper. Tear off the paper using the tear-off edge of the printer. Removing roll paper Roll paper cannot be fed backward. To remove roll paper, open the paper guide cover and remove the paper guide, then cut the paper behind where it feeds into the printer.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 OPTIONS.FM Pass 3 Using an Optional Front Sheet Guide The optional front sheet guide (C81423✽) fits inside the front of the printer. This option allows you to load single sheets and carbonless single-sheet multipart forms of up to 5 parts (one original and four copies). Paper used with front sheet guide must be 148 to 257 mm (5.8 to 10.1 inches) wide and can only be loaded one sheet at a time.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 2. Remove the edge guide from the bottom of the printer by pushing in the pegs. 3. Insert the front of the front paper guide into the holder on both sides of the printer’s interior. Insert the pegs on the back of the front paper guide into the holes on the inside-bottom of the printer.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 4. Open the edge guides on the paper guide all the way to the left and right, then place the paper guide in the upright position. Loading paper in the front sheet guide You can load single sheets or multipart forms one at a time in the front sheet guide. c Caution: Do not load envelopes in the front sheet guide. 1.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 2. If you are using ordinary single-sheet paper, set the paper thickness lever (located under the printer cover) to 0 as shown below. If you are loading a single-sheet multipart form, set the paper thickness lever to the proper position. 3. Slide the edge guide to the triangle mark on the front sheet guide.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 OPTIONS.FM Pass 3 4. Making sure it is aligned with the edge guide, load the paper printable side up until it meets resistance. The printer loads the paper automatically. Installing an Interface Card Follow the steps below to install an optional interface card. 1. Make sure the printer is turned off. Unplug the printer’s power cord and disconnect the interface cable. 2.
L R4C4620 Rev. C A5 size 3/29/00 OPTIONS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair 3. Slide the interface card along the slots on both sides of the interface compartment. Firmly push in the card to make sure the connector at the back of the interface card is fully inserted into the printer’s internal socket. Then replace the screws and tighten them.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 CLEANING.FM Pass 3 Appendix B Cleaning and Transporting the Printer Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Transporting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 CLEANING.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Cleaning the Printer To keep your printer operating at its best, you should clean it thoroughly several times a year. To clean your printer, follow these steps: 1. Remove any paper loaded in the printer. Make sure the printer is turned off. 2. Remove the paper guide. If a pull tractor or an optional cutsheet feeder is installed, remove it. 3.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 CLEANING.FM Pass 3 Transporting the Printer If you need to transport your printer some distance, carefully repack it using the original box and packing materials, as described below. w Warning: You need to move the print head by hand to remove the ribbon cartridge. If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it. 1.
L R4C4620 Rev. C A5 size 3/29/00 CLEANING.FM Pass 3 B-4 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Appendix C Specifications Printer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5 Environmental . . . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SPEC.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SPEC.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Built-in fonts: Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Bitmap fonts EPSON Draft EPSON Roman EPSON Sans Serif EPSON Courier EPSON Prestige EPSON Script EPSON OCR-B EPSON Orator EPSON Orator-S EPSON Script C 10, 12, 15 cpi 10, 12, 15 cpi, proportional 10, 12, 15 cpi, proportional 10, 12, 15 cpi 10, 12 cpi 10 cpi 10 cpi 10 cpi 10 cpi proportional Scalable fonts EPSON Roman 10.
Reliability: R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 Total print volume Print head life SPEC.FM Pass 3 19 million lines (except print head) MTBF 10,000 POH (25% duty) approx. 200 million strokes per wire Dimensions and weight: Height Width Depth Weight 160 mm (6.3 inches) 415 mm (16.3 inches) 368 mm (14.5 inches) approx. 7.5 kg (16.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SPEC.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Thickness 0.065 to 0.14 mm (0.0025 to 0.0055 inch) Cut sheet feeder: 0.07 to 0.14 mm (0.0028 to 0.0055 inch) Weight 52 to 90 g/m² (14 to 24 lb) Cut sheet feeder: 64 to 90 g/m² (18 to 24 lb) Single-sheet multipart forms: front entry only Width 100 to 257 mm (3.9 to 10.1 inches) Length 100 to 364 mm (3.9 to 14.3 inches) Copies 1 original + up to 4 copies Thickness 0.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Thickness 0.22 mm (0.0087 inch) Weight 192 g/m² (51 lb) Continuous paper (standard and multipart): front, rear, and bottom entry Width 101.6 to 254 mm (4.0 to 10.0 inches) Length (one page) 101.6 to 558.8 mm (4.0 to 22.0 inches) Copies 1 original + up to 4 copies Thickness Printable area 0.065 to 0.39 mm (0.0025 to 0.015 inch) Perforated edges up to 0.9 mm (0.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Continuous paper with labels: R R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 front and bottom entry Label size 23.8 × 63.5 mm (15/16 × 2.5 inches) minimum 2.5 mm (0.1 inch) corner radius, minimum Backing sheet width 101.6 to 254 mm (4.0 to 10.0 inches) Backing sheet length (one page) 101.6 to 558.8 mm (4.0 to 22.0 inches) Backing sheet thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch) Total thickness 0.16 to 0.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Paper alignment Front entry Printing starts at “0” on the scale. The unprintable area is to the left of the “0.” Rear entry Printing starts at “0” on the scale. The unprintable area is to the left of the “0.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SPEC.FM Pass 3 Printable area Single sheets, envelopes, and postcards: B A A B printable area printable area C B C A The minimum top margin is 4.2 mm (0.17 inch). B The minimum left margin is 3.0 mm (0.12 inch). The minimum right margin is 3.0 mm (0.12 inch). The maximum paper width is 257 mm (10.1 inches) and the maximum printable width is 203.2 mm (8.0 inches).
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SPEC.FM Pass 3 Continuous paper: A A Printable area B C-12 B A The minimum top and bottom margins above and below the perforation are 4.2 mm (0.17 inch) each. B The minimum left and right margins are 13 mm (0.51 inch) each. The maximum paper width is 254 mm (10.0 inches) and the maximum printable width is 203.2 mm (8.0 inches). For continuous paper wider than 229.2 mm (9.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SPEC.FM Pass 3 Roll paper: A B printable area A The minimum top margin is 4.2 mm (0.17 inch). B The minimum left margin is 3.0 mm (0.12 inch). The minimum right margin is 3.0 mm (0.12 inch). The maximum printable width is 203.2 mm (8.0 inches).
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Safety approvals 120 V model: Safety standards UL1950 CSA C22.2 No. 950 EMI FCC part 15 subpart B class B CSA C108.8 class B 230 V model: Safety standards EN 60950 EMI EN 55022 (CISPR pub. 22) class B AS/NZS 3548 class B Acoustic noise: Approx.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Command Lists Your printer supports the following EPSON ESC/P2 control codes and IBM 2390 Plus emulation control codes: EPSON ESC/P2 control codes Selecting an EPSON ESC/P2 printer in your software allows you to use advanced fonts and graphics.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SPEC.FM Pass 3 Barcode commands Your printer has powerful barcode printing capabilities and includes the following resident barcode fonts: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, and POSTNET.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SPEC.FM Pass 3 c: Control flag Bit 0 = Check digit 0: The printer does not add a check digit. 1: The printer adds a check digit. Bit 1 = Human readable character (HRC) 0: The printer adds the HRC. 1: The printer does not add the HRC.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SPEC.FM Pass 3 The valid data for each barcode type is described below. If invalid data is included in the barcode data string, the barcode is not printed.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 IBM 2390 Plus emulation control codes This printer emulates the IBM Proprinter using the commands below. For detailed information, see the IBM 2390 Plus reference manual.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Character Tables You can select the character tables shown in this section using the printer’s default-setting mode or with software commands. Note: ❏ Most of the character tables are the same as the PC 437 table for hex codes 00 through 7F; only the characters for hex codes 80 through FF are shown for these tables.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair PC 771 (Lithuanian) ISO 8859-2* PC 866 LAT.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 Italic table No character is available for hex code 15 in the Italic table C-30 Specifications Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 International character sets for the Italic table You can select one of the following eight international character sets for the Italic character table shown below using the defaultsetting mode or the ESC R command. For example, when you select “Italic France,” the characters in the “France” row are used in the Italic character table.
L R4C4620 Rev. C A5 size 3/29/00 SPEC.FM Pass 3 C-32 Specifications Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SUPPORT.FM Pass 3 Appendix D Customer Support Information Contacting Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2 For North American Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3 Electronic support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3 Automated telephone services . . . . . . . . . . . . . . . . . . .
L R4C4620 Rev. C A5 size 3/29/00 SUPPORT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Contacting Customer Support If your printer is not operating properly and you cannot solve the problem using the troubleshooting information in Chapter 7, contact customer support services for assistance. See the section for your country in this section.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SUPPORT.FM Pass 3 For North American Users If you purchased your printer in the United States or Canada, EPSON provides customer support through the following services: Electronic support services Service Access World Wide Web From the Internet, you can reach EPSON's home page at http://www.epson.com.
L R4C4620 Rev. C A5 size 3/29/00 SUPPORT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair EPSON also provides technical support and information on the installation, configuration, and operation of EPSON products. Dial (562) 276-4322 (U.S.), or (905) 709-3839 (Canada), 6 A.M. to 6 P.M., Pacific Time, Monday through Friday.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 SUPPORT.FM Pass 3 For United Kingdom and the Republic of Ireland Users If you purchased your printer in the UK or the Republic of Ireland, Epson (UK) Limited provides a range of customer services and technical support. Note: For customers in the Republic of Ireland, please use the correct dialing codes when dialing the UK telephone numbers listed in the following sections.
L R4C4620 Rev. C A5 size 3/29/00 SUPPORT.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair If this booklet is not available, details can be found on Faxon EPSON faxback service, EPtec Bulletin Board Service, or on EPSON’s World Wide Web site. See below for details.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SUPPORT.FM Pass 3 World Wide Web If you can connect to the Internet and have a Web browser, you can access EPSON’s World Wide Web site at http://www.epson.com. Here you will find information on the latest EPSON products, software drivers, and answers to frequently asked questions. For Australian Users EPSON Australia wishes to provide you with a high level of Customer Service.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SUPPORT.FM Pass 3 Your dealer Don’t forget that your dealer can often help identify and resolve problems. The dealer should always be the first call for advice on problems. They can often solve problems quickly and easily as well as give you advice on the next step to take. EPSON Helpdesk EPSON Helpdesk is provided as a final backup to make sure our clients have access to advice.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 SUPPORT.FM Pass 3 For Hong Kong Users To obtain technical support as well as other after-sales services, users are welcome to contact EPSON Hong Kong Limited.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair SUPPORT.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 GLOSS.FM Pass 3 Glossary ASCII American Standard Code for Information Interchange. A standardized coding system for assigning numeral codes to letters and symbols. auto line feed When this option is turned on in the default-setting mode or the EPSON Remote! utility, each carriage return (CR) code is automatically followed by a line feed (LF) code.
L R4C4620 Rev. C A5 size 3/29/00 GLOSS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair dithering A halftoning method in which dots are printed in a predetermined pattern to simulate a shade or tone. Dithering works best for images with solid colors, such as charts and graphs. See also halftoning. dot matrix A method of printing in which each letter or symbol is formed by a pattern (matrix) of individual dots.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 GLOSS.FM Pass 3 interface The connection (via a cable) between the computer and the printer through which print data is transmitted to the printer. initialization Returns the printer to its default settings (a fixed set of conditions). landscape Printing that is oriented sideways on the page.
L R4C4620 Rev. C A5 size 3/29/00 GLOSS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair resolution A measure of the amount of detail that can be represented. Resolution of printed images is measured by using the number of dots per inch (dpi). self test A method for checking the operation of the printer. When you run the self test, an internally stored self-pattern is printed.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair R R4C4620 Rev. C A5 size 3/29/00 GLOSS.FM Pass 3 Paper positions Standby position In the standby position, your paper is attached to the printer but is not inside the printer. Tear-off position Tear off your printed document at the printer’s tear-off edge.
L R4C4620 Rev. C A5 size 3/29/00 GLOSS.FM Pass 3 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair Top-of-form position The letters ABC above are printed at the top-of-form position.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 USERS.
L R4C4620 Rev. C A5 size 3/29/00 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair USERS.
Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
L R4C4620 Rev. C A5 size 3/29/00 USERS.IX Pass 3 IN-4 Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.
R R4C4620 Rev. C Proof Sign-off: SEI Y.Ohkawara T.Takahashi T.Takahashi SEI M.Kauppi K.Blair A5 size 3/29/00 PARTS.