User's Manual

If your computer or video adapter card does not have a VGA

connector, you cannot use the interface cable that comes with the

monitor. Determine the sync requirements of your video display

controller and see the signal connector table on page 18 to determine

which interface cable(s) you need. (See your dealer if you need help.)

Then connect the appropriate interface cable(s) to the connector(s) on

the monitor and computer. Perform only the appropriate steps below.

CAUTION

Before you connect the monitor to your computer, make sure the monitor,

compute-r, and all other peripherals are turned off.

Follow these steps to connect the monitor to your computer:

With the screen still facing down, notice the five monitor

connectors labeled R, G/S, B, H/C, and V.

Professional Series Monitor