User's Manual
Icon
Display Function
setting name
Pin cushion/
Straightens the vertical image edges. Use the increment
barrel
button to increase the convex flex and the decrement
button to increase the concave flex.
Trapezoid
(keystoning)
Adjusts the slope of the vertical image edges. Use the
increment button to decrease the width of the top edge
and increase the width
of
the bottom edge. Use the
decrement button to increase the width of the top edge
and decrease the width of the bottom edge.
Follow these steps to modify a factory-set display mode:
1.
Display an image you want to adjust. (This ensures the monitor is
operating in the factory-set mode you want to modify.)
2.
Turn the selector switch to a display setting you
want
to
change.
The table above describes the settings you can choose from.
For example, if you want to center the image horizontally, turn
the selector switch to the horizontal position setting. Make sure
the dot on the selector switch is next to the horizontal position
icon, as shown below.
Professional Series Monitor
13