User's Manual

1.
2.
3.
4.
5.
6.
7.
a.
9.
10.
11.
12.
13.
14.
15.
Read all of these instructions and save them for later reference.
Follow all warnings and instructions marked on the monitor and
in this manual.
The monitor contains shock hazard potential. Do not attempt to
open or remove any covers, and do not attempt to service the
monitor yourself. Refer all servicing to authorized service
personnel.
Never push objects of any kind into the monitor through cabinet
slots.
Do not expose the monitor to liquids, such as rain or spills.
Do not place the monitor near a heating appliance or in direct
sunlight.
Do not place the monitor on an unstable cart, stand, or table, and
be careful not to drop it.
Slots and openings in the top and bottom of the cabinet are
provided for ventilation; do not block or cover these openings.
Be careful not to damage the power cord or plug.
Voltages outside of the monitor’s specified line voltage range may
harm the monitor. The monitor should be operated from the type
of power source indicated on the rear panel marking label.
Plug the power cord only into a grounding-type wall outlet.
Make sure the combined amperage rating for all products
plugged into the wall outlet used for the monitor does not exceed
the amperage rating of the wall outlet.
Do not replace the interface cable with a non-shielded cable.
Unplug the monitor from the wall outlet and the computer before
cleaning. Use a damp cloth for cleaning.
Excessive brightness for long periods may permanently imprint
Important Safety Instructions
an image on the screen.
. .
111