Start Here Card

ManualsBrandsEpson ManualsPrintersEpson Epson Perfection 3200 PRO

Start Here

1 Make sure you have everything:

Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire,

iLink™), you need to purchase an IEEE 1394 cable (not included).

2 Remove all the packing tape, but leave the large sticker in place

until instructed to remove it.

3 Insert the hinges on the cover

into the square holes at the

back of the scanner. (Make

sure the cable does not get

caught under the scanner

cover.) Close the cover.

Unpack Your Scanner

Turn over

Scanner Software for Mac OS X

1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.

2 Double-click the EPSON CD-ROM icon and then double-click the

English folder.

3 Double-click the EPSON Scan Installer icon.

4 Enter your Administrator name and password and click OK.

5 When you see the EPSON Scan Installer window, click Install,

then follow the on-screen instructions.

6 Double-click the Reference Guide icon.

7 Click Install to install your Scanner Reference Guide.

Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software

Suite, following the instructions included with each program. Then continue

with the instructions under “Connect the Scanner.”

Scanner

CD-ROM with EPSON

Scan driver, software,

and electronic manuals

USB cable

Film holders

LaserSoft

SilverFast

Ai6

CD-ROM

Adobe

Photoshop

Elements

2.0 CD-ROM

IMPORTANT!

Leave the sticker in

place until you are

instructed to remove it.

Wait! You must install your software before connecting the scanner

to your computer. The install process may take up to 15 minutes.

Be sure to close all open programs and turn off any virus

protection programs.

If you don’t already have Adobe Photoshop or Photoshop Elements on your

computer, install Photoshop Elements from the CD-ROM included with your

scanner. To view the Photoshop user manuals, you’ll need Adobe Acrobat

Reader

(included on your Photoshop Elements CD).

Windows

First you’ll install Adobe Photoshop Elements, then your scanner software.

Photoshop Elements

Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or

DVD drive. The installer starts automatically.

2 Make sure US English is selected and click Next.

3 Follow the on-screen instructions to begin installation and accept the

software license conditions.

Install the Software

continue

4 When you see this screen, click the Adobe Photoshop Elements

button.

5 Follow the on-screen instructions. When you’re asked for a software

serial number, enter the number printed on the sticker attached to the

CD-ROM sleeve.

6 If you don’t have Acrobat Reader, eject the CD-ROM and repeat

steps 1 – 3. Then select Adobe Acrobat Reader to install it.

Continue with the instructions below to install the scanner software.

Scanner Software

1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.

The installer starts automatically.

If it doesn’t start, double-click My Computer (in Windows XP, click

Start > My Computer), double-click EPSON, then double-click

EPSON.

2 When you see a message asking you to select a language,

click English.

3 At the Software Installation screen, click Install.

4 Read the license agreement, then click Agree.

5 Follow the on-screen instructions to install each program. After each

one is installed, click Next or Finish to continue. Note that EPSON

Smart Panel™ installs in several steps. If you have PDA (Palm™ or

Pocket PC) software on your computer, Presto! PixExpress will be

installed.

6 Click Exit. The EPSON Product Registration screen appears.

7 Register your scanner as instructed. At the last screen, click Done or

close your browser.

Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software

Suite, following the instructions included with each program. Then continue

with the instructions under “Connect the Scanner.”

Click Install

Click Adobe

Photoshop

Elements

5 When you’re asked for a software serial number, enter the number

printed on the sticker attached to the CD-ROM sleeve.

6 When you see this screen, click the Install button.

7 Follow the on-screen instructions to install the software.

8 When you’re finished, click Quit.

9 If you don’t have Acrobat Reader, you can install it from the CD-ROM.

Open the Adobe Acrobat Reader folder. Then double-click the Reader

Installer icon to install it.

Continue with the following instructions to install the scanner software.

Scanner Software for Mac OS 8.6 – 9.x

1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.

(If necessary, double-click the EPSON CD-ROM icon to open it.)

2 Double-click .

3 When you see a message asking you to select a language,

click English.

4 When the Software Installation screen appears, click Install.

5 Read the license agreement, then click Agree.

6 When you see the EPSON Scan Installer, click Install.

When the EPSON Scan installation is complete, click Restart.

Don’t remove your CD-ROM. After your Macintosh restarts,

you can install the rest of your software.

7 When your Macintosh restarts, double-click the EPSON CD-ROM

icon to open it, if necessary, then double-click . Click English.

You see this screen:

8 Click Install and follow the on-screen instructions to install each

program. After each one is installed, click Quit to continue. Note

that EPSON Smart Panel installs in several steps. If you have PDA

(Palm) software on your computer, Presto! PixExpress will be installed.

9 Click Exit. The EPSON Product Registration screen appears.

10 Register your scanner as instructed. At the last screen, click Done or

close your browser.

Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software

Suite, following the instructions included with each program. Then continue

with the instructions under “Connect the Scanner.”

Click Install

Scanner cover/

transparency unit

Macintosh

First you’ll install Adobe Photoshop Elements, then your scanner software.

Photoshop Elements

1 Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or

DVD drive.

2 Double-click the or CD-ROM icon and double-click the

English folder.

3 Double-click the Install Photoshop Elements icon.

4 Follow the on-screen instructions to begin installation and accept the

software license conditions. In Mac

OS X, enter your Administrator

name and password, then click OK.

Click Install

EPSON Perfection

3200 Pro

4040929-01 Printed in Singapore XXX

Click Install

continue continue

Connect the Scanner

After your software is installed, it’s time to get connected.

1 Remove the sticker from the transportation lock. Use a coin to turn

the lock clockwise one-quarter turn to unlock the scanner carriage.

2 Remove the sticker from the back of the scanner.

3 Connect the cable for the built-in transparency unit to the round

connector on the back of the scanner. You may need to raise the

scanner cover and twist the cable to insert it.

Remove sticker

Make sure the

arrow faces up

continue

ArcSoft

Software Suite

CD-ROM

MonacoEZcolor 2 CD-ROM

Summary of content (2 pages)

PAGE 1
Start Here 4 ® EPSON Perfection 3200 Pro When you see this screen, click the Adobe Photoshop Elements button. 1 Unpack Your Scanner 4040929-01 1 5 When you’re asked for a software serial number, enter the number printed on the sticker attached to the CD-ROM sleeve. Scanner Software for Mac OS X 1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive. 6 When you see this screen, click the Install button. 2 Double-click the English folder.
PAGE 2
4 Connect either the USB interface cable that comes with your scanner or an optional IEEE 1394 (FireWire) cable. Don’t connect both. 4 If you’re using USB... 5 Plug the square end of the USB cable into the scanner’s USB port. Then plug the flat end into any available USB port on your computer or USB hub. Note: Your scanner may not work correctly if you use a USB cable other than the one supplied by EPSON or if you connect your scanner to a multi-level USB hub system.