Epson Perfection V350 Photo Scanner Parts Eject button Auto film loader { Copy button ] Start button | Scan to E-mail button a Scan to PDF button Scanner cover (transparency unit) Film guide Status light Auto film loader cover Document mat Document table glass Carriage USB interface connector Feed knob DC power inlet Scanner Specifications Transparency unit window General Film path cover Scanner type Flatbed color Photoelectric device Color CCD line sensor Effective pixels 40,800 ×
Epson Perfection V350 Photo Scanning resolution Output resolution Environmental 4800 dpi (main scan) 9600 dpi with Micro Step Drive™ (sub scan) Temperature Operating 41 to 95 °F (5 to 35 °C) Storage 50 to 6400, 9600, and 12800 dpi (50 to 6400 dpi in 1 dpi increments) Humidity –13 to 140 °F (–25 to 60 °C) Operating 10 to 80%, without condensation Storage 10 to 85%, without condensation Scanning speed (reflective) Approximately 4.6 msec per line at 600 dpi Approximately 21.
Epson Perfection V350 Photo 3. An area 0.12 inch (3 mm) from the horizontal and the vertical sides of the scanner glass cannot be scanned. If you place a document in the corner of the document table, move it up and in slightly to avoid cropping. Placing Documents or Photos Caution: Do not place heavy objects on the document table glass and do not press the glass with too much force. Maximum unreadable area of 0.12 inch (3 mm) a 1. Open the scanner cover.
Epson Perfection V350 Photo Placing Large or Thick Documents 1. Open the scanner cover and gently slide up the document mat to remove it. When you need to scan a large or thick document, you can either raise the lid to its highest posistion, or open the scanner cover all the way as described below, so that it lies flat next to the scanner. 1. Open the scanner cover. 2. Pull the scanner cover straight up. 2.
Epson Perfection V350 Photo Placing Film in the Auto Film Loader 2. Make sure the film strip is placed as shown. The Perfection V350 Photo comes with an auto film loader on the scanner cover that lets you load a film strip for scanning automatically. Before loading a filmstrip in the auto film loader, however, make sure it meets these requirements to avoid damaging your film or the film loader: ❏ The film is dry. ❏ The film is not infrared film. ❏ The film is 35 mm wide and 2.9 to 9.
Epson Perfection V350 Photo 1. Make sure you have installed Epson Scan and have turned on your computer. Note: Always open the film guide whenever you use the auto film loader, no matter how short the film strip is; otherwise, it may cause a film jam. 2. Remove the document mat. (See page 4.) 3. Close the scanner cover. 6. Place a film strip into the auto film loader with its shiny base side facing down. Your images and any wording on the film strip should appear backwards on the side that faces up.
Epson Perfection V350 Photo Ejecting Film 1. Place the film holder on the document table so that it is aligned as shown. Make sure the tab labeled A on the film holder fits into the area labeled A on the scanner. When you finish scanning, follow these steps to eject the film from the auto film loader: 1. Press the 5 Eject button. 2. Place one or two slides in the film holder with the shiny base side facing down. Your images should appear backwards on the side that faces up.
Epson Perfection V350 Photo Storing the Film Holder Scanning and Restoring Photos When you are not using the film holder, you can store it inside the scanner cover. Using the Color Restoration feature in Epson Scan, you can transform old, faded, or badly exposed photos into ones with true-to-life color. You can restore printed photos, negative film, or slides automatically as you scan them. 1. Open the scanner cover and remove the document mat. (See page 4.) 2.
Epson Perfection V350 Photo Removing Dust From Photos, Film, or Slides Fixing Backlit Photos Using the Backlight Correction feature in Epson Scan’s Home or Professional Mode, you can remove shadows from photos that have too much background light. You can fix printed photos, film, or slides automatically as you scan them. For detailed steps, see the on-screen User’s Guide.
Epson Perfection V350 Photo Transporting the Scanner Before transporting the scanner for a long distance or storing it for an extended period of time, the scanner’s carriage needs to be in the center position to prevent damage. 1. Make sure the carriage is in the center position of the scanner. ❏ If the scanner is plugged in and connected to your computer, the carriage will move to the center position after scanning.