User's Guide

Lights
1 Ready
2 Error
Light status Condition/solution
The Ready light is on The scanner is turned on and ready to scan.
The Ready light is flashing The scanner is scanning or initializing. Wait for the Ready light to stop
flashing before turning off the scanner.
The Error light is flashing An error has occurred. Try the following:
• Check the scanner connection to your computer to make sure it is
secure.
• Make sure your scanning software is installed correctly.
• If the Error light is still flashing, turn off the scanner, then turn it on
again. If the error continues, the scanner may be malfunctioning.
Contact Epson for support.
All scanner lights are off The scanner is turned off.
Parent topic: Solving Problems
Solving Scanning Problems
Check these solutions if you have problems scanning with your product.
Scanner Does Not Turn On or Turns Off Unexpectedly
Scanner Buttons Do Not Work as Expected
Scanning Software Does Not Operate Correctly
Cannot Start Epson Scan
Scanning is Slow
Parent topic: Solving Problems
98