Using PictureMate With a Computer CPD-17895R2 Printed in XXXXXX XX.
Follow These Easy Steps To use PictureMate™ with your computer, you’ll need to: Install the software on your computer from the PictureMate CD. Follow the steps in this booklet. Connect PictureMate to your computer. The steps here tell you how and when to connect. View the on-screen User’s Guide. Click PictureMate User’s Guide right on your computer screen for steps on using PictureMate with your computer. It’s your comprehensive guide to PictureMate.
Installing Software and Connecting PictureMate To connect PictureMate, you’ll need this cable: Type A to B USB cable If you don’t already have a USB cable, you can buy one from your local computer dealer or from Epson.® See the inside back cover for details. When you’re ready to start, see the section for your computer system: ■ ■ For Windows,® see below. For Macintosh,® see page 6.
. Wait a minute for your computer to start up, then insert the PictureMate CD in your CD-ROM or DVD drive. 5. After a moment, you see this screen: Read the license agreement and click AGREE. Note: If you see a screen like this, remove your memory card from PictureMate and click the X in the upper right corner to close the screen, if necessary. Note: If you see a screen like this, click Cancel and disconnect PictureMate from your computer. Then turn off your computer and begin again at step 3.
6. When you see this screen, click OK to begin installing your software. 7. When you see this screen, connect the square end of your USB cable to PictureMate. Then connect the flat end of the USB cable to your computer. (You can connect it to any open USB port.) Note: Make sure the PictureMate handle is pushed all the way down in back before connecting the USB cable. On Windows 98SE, you see an Add New Hardware Wizard screen. Click Next, select the Search for option, and select CD-ROM drive.
8. When you see this screen, click OK to print a 4 × 6-inch sample photo. You see a progress screen as it prints. (If it doesn’t print, see page 12.) Wait until printing finishes before continuing with step 9. 9. When printing finishes, click Next to install the on-screen User’s Guide and more software. 10. When you see this screen, you can install additional photo software: Click Epson Software Film Factory, then click Install on the next screen and follow the on-screen instructions.
Note: If you are asked if you want to install QuickTime,® click Yes and follow the on-screen instructions; you don’t need a registration number. Also uncheck the boxes for launching QuickTime and Film Factory™ at the end of their installations. 11. When you’re done installing software, click Exit. The registration screen appears. Follow the on-screen instructions to register PictureMate. 12. You see a prompt to restart your computer. Click OK, then restart your computer. 13.
Install PictureMate for Macintosh 1. If you inserted a memory card, remove it from PictureMate. 2. Connect the square end of your USB cable to PictureMate. Then connect the flat end of the USB cable to any open USB port on your Macintosh. 3. Press the P On button to turn on PictureMate. 4. Turn on your Macintosh and wait a minute for it to start up. 5. Insert the PictureMate CD in your CD-ROM or DVD drive. 6. Double-click the PictureMate CD icon, if necessary, then double-click PictureMate.
7. After a moment, you see this screen: Read the license agreement and click AGREE. 8. When you see the Install Menu, click Install Printer Driver and Utilities. Follow the on-screen instructions to install several programs. Note: With OS X, you’ll need to enter your password several times as you install.
9. When you return to the Install Menu, click Install Optional Software. You see this menu: 10. Click Epson Software Film Factory, then click Install on the next screen and follow the on-screen instructions. 11. When you return from the Film Factory installation screens, click Back. 12. At the Install Menu, click Install Printer Manual to install your on-screen User’s Guide. 13. When you’re done installing software, click Exit. The registration screen appears.
Selecting Your Printer in Mac OS X 1. Open the Applications folder, then open the Utilities folder and Printer Setup Utility (OS X 10.3.x) or Print double-click Center (OS X 10.2.x). Note: If you see this screen, click Add and go to step 3. If you see this screen, click OK and go to step 3. 2. If PictureMate appears in the Printer List, click PictureMate and click Add. If it doesn’t appear, make sure PictureMate is turned on and connected to your Macintosh, then click Add. 3. You see a new screen.
5. You see the Printer List with PictureMate added. Close the Printer Setup Utility or Print Center. 6. Remove and store your PictureMate CD. You’re ready to store or print your photos! Insert your memory card or open your photo file on your computer, as described in the on-screen User’s Guide. Double-click the PictureMate User’s Guide icon on your screen to view the User’s Guide. Follow the steps there to use PictureMate with your Macintosh.
Selecting Your Printer in Mac OS 9 1. Open the Chooser from the Apple® menu and select these options: ■ ■ PictureMate Your USB port ■ Background printing On 2. Close the Chooser. Then remove and store your PictureMate CD. You’re ready to store or print your photos! Insert your memory card or open your photo file on your computer, as described in the on-screen User’s Guide. Double-click the PictureMate User’s Guide icon on your screen to view the User’s Guide.
Help With Software Installation Problems If you have problems installing the software, try these suggestions: ■ ■ ■ ■ ■ ■ Carefully follow the instructions on the Start Here sheet and in this booklet. Don’t connect PictureMate to the computer until you are instructed to. Then connect the USB cable securely at both ends. Close your other programs, including any screen savers and virus protection software, and install the PictureMate software again.
Follow These Easy Steps To use PictureMate™ with your computer, you’ll need to: Install the software on your computer from the PictureMate CD. Follow the steps in this booklet. Connect PictureMate to your computer. The steps here tell you how and when to connect. View the on-screen User’s Guide. Click PictureMate User’s Guide right on your computer screen for steps on using PictureMate with your computer. It’s your comprehensive guide to PictureMate.
Using PictureMate With a Computer CPD-17895R2 Printed in XXXXXX XX.