Start Here Guide

ManualsBrandsEpson ManualsPrintersEpson Epson PictureMate Dash Compact Photo Printer - PM 260

2 Plug In and Turn On

1 Connect the power adapter to the back of

PictureMate.

2 Connect the power

cable to the power

adapter.

3 Plug the other end

of the power cable

into a power outlet.

4 Flip the handle to the back.

5 Open the paper support.

6 Press the On button to turn on PictureMate.

After a moment, you see

this on the photo

viewer screen:

Now you can install your initial photo cartridge.

3 Install the Initial

Photo Cartridge

1 Turn PictureMate around and open the cartridge door.

2 Slide the cartridge lever left to the Release position.

3 Remove the initial photo cartridge

from its package.

Caution: Do not install a

different PictureMate

cartridge for initial setup.

Install only the initial photo cartridge

that came with your PictureMate.

4 Slide the cartridge straight into the slot, label side up,

until it clicks into place. It will not go in all the way.

5 Slide the lever all the way right, to the Lock position.

6 Close the cartridge door.

PictureMate charges the print head for

3 to 4 minutes and displays the screen above.

7 When you see the

Charging complete

message on the photo

viewer screen, press

OK.

Turn over

*411058000*

Start Here

Follow these steps to set up your PictureMate Dash

or Zoom and print–no computer required!

Note: PictureMate Dash is shown throughout, but the steps are the

same for PictureMate Zoom. To print from your computer, see the

Basics book and your CD after completing these steps.

1 Unpack

PictureMate

comes with all these items in the box.

1 Remove all the tape and packing material from the

outside of PictureMate.

2 Open the cartridge door

on the back of

PictureMate.

3 Remove the packing

material from inside the

cartridge slot.

4 Close the cartridge door.

PictureMate

Initial PictureMate

photo cartridge

PictureMate

photo paper

Basics

book Printer Software CD

Power adapter Power cable

Press here

PictureMate Zoom

(PM 290)

I/ On

button

PictureMate Dash

(PM 260)

Summary of content (6 pages)

PAGE 1
Start Here ® 2 Plug In and Turn On PictureMate ZoomTM (PM 290) 1 2 3 Follow these steps to set up your PictureMate Dash or Zoom and print –no computer required! Note: PictureMate Dash is shown throughout, but the steps are the same for PictureMate Zoom. To print from your computer, see the Basics book and your CD after completing these steps. 1 Unpack 2 Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package.
PAGE 2
Start Here ® 2 Plug In and Turn On PictureMate ZoomTM (PM 290) 1 2 3 Follow these steps to set up your PictureMate Dash or Zoom and print –no computer required! Note: PictureMate Dash is shown throughout, but the steps are the same for PictureMate Zoom. To print from your computer, see the Basics book and your CD after completing these steps. 1 Unpack 2 Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package.
PAGE 3
Start Here ® 2 Plug In and Turn On PictureMate ZoomTM (PM 290) 1 2 3 Follow these steps to set up your PictureMate Dash or Zoom and print –no computer required! Note: PictureMate Dash is shown throughout, but the steps are the same for PictureMate Zoom. To print from your computer, see the Basics book and your CD after completing these steps. 1 Unpack 2 Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package.
PAGE 4
5 4 Load Paper PictureMate comes with genuine Epson® glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage PictureMate. 1 1 Move the handle to the back and open the paper support, if necessary. Remove the memory card containing photos from your digital camera. Insert a Memory Card 2 2 1 Press the 2 Press to select Print Settings, then press OK. 3 Press OK to select Layout.
PAGE 5
4 Load Paper PictureMate comes with genuine Epson® glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage PictureMate. 1 1 Move the handle to the back and open the paper support, if necessary. Remove the memory card containing photos from your digital camera. Insert a Memory Card 2 2 1 Press the 2 Press to select Print Settings, then press OK. 3 Press OK to select Layout.
PAGE 6
5 4 Load Paper PictureMate comes with genuine Epson® glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage PictureMate. 1 1 Move the handle to the back and open the paper support, if necessary. Remove the memory card containing photos from your digital camera. Insert a Memory Card 2 2 1 Press the 2 Press to select Print Settings, then press OK. 3 Press OK to select Layout.