Start Here Card

ManualsBrandsEpson ManualsPrintersEpson Epson PictureMate Pal Compact Photo Printer - PM 200

2 Plug In and Turn On

1 Connect the power adapter to the back of

PictureMate Pal.

2 Connect the power

cable to the power

adapter.

3 Plug the other end

of the power cable

into a power outlet.

4 Flip the handle to the back.

5 Open the paper support.

6 Press the On button to turn on PictureMate Pal.

After a moment, you see

this on the photo

viewer screen:

Now you can install your initial photo cartridge.

3 Install the Initial

Photo Cartridge

1 Open the cartridge door.

2 Slide the cartridge lever left

to the Release position.

3 Remove the initial photo cartridge

from its package.

Caution: Do not install a

different PictureMate Pal

cartridge for initial setup.

Install only the initial photo cartridge

that came with PictureMate Pal.

4 Slide the cartridge straight into the slot, label side up,

until it clicks into place. It will not go in all the way.

5 Slide the lever all the way right, to the Lock position.

Caution: If the cartridge is not inserted correctly,

ink may leak.

6 Close the cartridge door.

PictureMate Pal charges the print head for

3 to 4 minutes and displays the screen above.

7 When you see the

Charging complete

message on the photo

viewer screen, press OK.

Turn over

*410591100*

Initial Charge

Charging.

Please wait.

Start Here

Set up your PictureMate Pal

and print–no computer

required!

Note: To print from your computer, see

the Basics book and your CD after completing these steps.

1 Unpack

PictureMate Pal comes with all these items in the box.

1 Remove all the tape and packing material from the

outside of PictureMate Pal.

2 Open the cartridge door

on the back of

PictureMate Pal.

3 Remove the packing

material from inside the

cartridge slot.

4 Close the cartridge door.

PictureMate Pal

Initial PictureMate Pal

photo cartridge

PictureMate Pal

photo paper

Basics book

PictureMate Pal

Printer Software CD

Power adapter Power cable

PM 200

Press OK

Summary of content (6 pages)

PAGE 1
Start Here PM 200 2 1 Connect the power adapter to the back of PictureMate Pal. 2 Connect the power cable to the power adapter. 3 Set up your PictureMate Pal and print –no computer required! 4 Note: To print from your computer, see Plug In and Turn On Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package. Plug the other end of the power cable into a power outlet.
PAGE 2
Start Here PM 200 2 1 Connect the power adapter to the back of PictureMate Pal. 2 Connect the power cable to the power adapter. 3 Set up your PictureMate Pal and print –no computer required! 4 Note: To print from your computer, see Plug In and Turn On Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package. Plug the other end of the power cable into a power outlet.
PAGE 3
Start Here PM 200 2 1 Connect the power adapter to the back of PictureMate Pal. 2 Connect the power cable to the power adapter. 3 Set up your PictureMate Pal and print –no computer required! 4 Note: To print from your computer, see Plug In and Turn On Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package. Plug the other end of the power cable into a power outlet.
PAGE 4
5 Load Paper PictureMate Pal comes with geniune Epson glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage Insert a Memory Card 1 Remove the memory card containing photos from your digital camera. 2 Insert your memory card into the correct slot on PictureMate Pal. PictureMate Pal. 1 Move the handle to the back.
PAGE 5
4 5 Load Paper PictureMate Pal comes with geniune Epson glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage Insert a Memory Card 1 Remove the memory card containing photos from your digital camera. 2 Insert your memory card into the correct slot on PictureMate Pal. PictureMate Pal. 1 Move the handle to the back.
PAGE 6
4 5 Load Paper PictureMate Pal comes with geniune Epson glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage Insert a Memory Card 1 Remove the memory card containing photos from your digital camera. 2 Insert your memory card into the correct slot on PictureMate Pal. PictureMate Pal. 1 Move the handle to the back.