EPSON PowerLite 7800p Multimedia Projector ® ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . . 2 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Unpacking the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Additional Components. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Optional Accessories .
2 3 iv Displaying and Adjusting the Image . . . . . . . . 27 Projecting the Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Turning on the Projector . . . . . . . . . . . . . . . . . . . . . . . . 28 Selecting the Image Source. . . . . . . . . . . . . . . . . . . . . . . 30 Troubleshooting Display Problems. . . . . . . . . . . . . . . . . . . . 31 You Can’t Project an Image . . . . . . . . . . . . . . . . . . . . . . 31 The Projector and Laptop Don’t Display the Same Image . . . . .
Creating Your Own Startup Screen. . . . . . . . . . . . . . . . . . . . 57 Capturing the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Choosing When to Display the Image . . . . . . . . . . . . . . 59 Controlling Multiple Projectors . . . . . . . . . . . . . . . . . . . . . . 60 Setting the Projector ID . . . . . . . . . . . . . . . . . . . . . . . . . 60 Setting the Remote Control ID . . . . . . . . . . . . . . . . . . . 61 4 5 Fine-tuning the Projector . . . . . . . . . . . . . . . . .
Using EMP NetworkManager . . . . . . . . . . . . . . . . . . . . . . . 87 Selecting the Projectors to Monitor . . . . . . . . . . . . . . . . 87 Setting a Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Creating the E-Mail Settings . . . . . . . . . . . . . . . . . . . . . 88 Understanding the Notification Messages . . . . . . . . . . . 91 6 7 A B vi Maintaining the Projector. . . . . . . . . . . . . . . . . . . 93 Cleaning the Lens. . . . . . . . . . . . . . . . . . . . . . . . .
C Appendix C: Notices . . . . . . . . . . . . . . . . . . . . . . . . 123 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 123 Remote Control Information . . . . . . . . . . . . . . . . . . . . . . . 125 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . 126 FCC Compliance Statement. . . . . . . . . . . . . . . . . . . . . . . . 127 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Index . . . . . . . . . . . . . .
viii
- Welcome The EPSON ® PowerLite® 7800p is a versatile, lightweight projector designed to ensure that your presentations are easy and trouble-free, whether you use it in the classroom or conference room. When space is limited, you can project against a surface less than five and one-half feet away.
Using Your Documentation This book contains all the information you need to set up and use your projector. Please follow these guidelines as you read through it: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment. ■ Notes contain important information about your projector. ■ Tips contain additional projection hints.
Registration and Warranty Your projector comes with a basic carry-in warranty as well as an international warranty that let you project with confidence anywhere in the world. For details, see page 128 and the warranty brochure included in your Start Here kit. In addition, for customers who register their projector, EPSON offers free Extra CareSM Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired.
Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: note You won’t need all these components; your configuration will determine which ones you need. Projector Power cable RCA-style video cable Remote control and batteries VGA computer cable Stereo mini-jack audio cable Projector software CD-ROM RCA-style audio cable USB cable Save all packaging in case you need to ship the projector.
Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you’ll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from EPSON; see page 6. ■ To receive a component video signal from a VCR or other video device, you’ll need a component video cable. ■ To project HDTV images, you’ll need an HDTV cable.
Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Part number Replacement lamp V13H010L22 Air filter replacement set V13H134A01 Samsonite® wheeled soft case ATA molded hardshell case ELPKS35 ELPKS48 Ceiling mount Suspension adapter False ceiling plate ELPMB40 ELPMBAPL ELPMBFCP Optional lenses* See below Kensington® security lock ELPSL01 Projection screens: 50-inch portable screen 60-inch portable pop-up screen 80-inch portable
1 Setting Up the Projector T his chapter gives you basic information on setting up the projector: where to position it and how to connect it to a video source (such as a VCR or DVD player) or to a laptop or desktop computer.
note Positioning the Projector You can mount the projector on the ceiling, or place it behind a translucent screen for rear projection. See page 115 for details. If you’re setting up the projector yourself and it isn’t already installed in the theater or conference room you’re using, you’ll probably want to place it on a table in front of the screen, as shown. x art below This lets you stand in the front of the room, face the audience, and remain close enough to the equipment to be able to control it.
Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The base of the lens should be at about the level of the bottom of the screen. Screen Projector note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector’s left side. You can purchase this from EPSON; see “Optional Accessories” on page 6.
Connecting to Video Equipment You can connect up to four video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video-output connections: ■ If your video player has a yellow RCA-style video output connector, see “Connecting a Composite Video Source” on page 11. ■ If your video player has an S-Video connector, see “Connecting an S-Video Source” on page 12.
Connecting a Composite Video Source 1. Locate the RCA-style video cable provided with the projector. 2. Connect the cable to the yellow video output connector on your player and the yellow Video connector on the projector: 3. If you want to play sound through the projector, see page 24 for instructions on connecting an audio cable. 4. If you don’t need to make any other connections, see Chapter 2 or the Quick Setup sheet for instructions on turning on the projector and adjusting the image.
Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment, or you can purchase one from EPSON; see page 6). 2. Connect the cable between the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 24 for instructions on connecting an audio cable. 4.
Connecting a Component Video Source 1. Locate a component video cable (one may be included with your video equipment). BNC adapters Look at the connectors at one end of the cable. If they are bayonet-style (BNC) connectors, continue on to the next step. If they are RCA-style connectors, you’ll need to attach commercially available BNC adapters to plug the cable into your projector. 2. Connect the cable (with the adapters) to your player and the BNC connectors on the projector.
Connecting an RGB Video Source note Be sure your video player is not a component video source. If you set the wrong source, image quality may suffer. Check your video player’s documentation. Follow these instructions to connect the projector to a video player that has an RGB video output port. Depending on the type of connector on your player, you’ll need to use the appropriate cable: ■ If your player has a single VGA-style connector, see below.
Connecting Using a BNC-style Cable 1. Locate a BNC-style video cable (one may be included with your video equipment). 2. Connect the cable between your player and the corresponding R/G/B connectors on the projector. note Be sure your video player is not a component video source. If you set the wrong source, image quality may suffer. Check your video player’s documentation. 3. If you want to play sound through the projector, see page 24 for instructions on connecting an audio cable. 4.
Connecting to a Computer note If you connect a Windowsbased computer to the projector, you may see a New Hardware Wizard saying your computer has found a plug-and-play monitor; if so, click Cancel. You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including desktop models, PC notebook and laptop computers, Macintosh PowerBooks and iBooks, and hand-held devices.
Connecting to the Computer Port Follow these instructions: 1. You can connect to the Computer port in three ways: ■ using the VGA computer cable that came with the projector (the monitor port on your computer must be a mini D-sub 15-pin port) ■ using a commercially available 13w3 D-sub 15-pin cable, if your computer has a 13w3 monitor port ■ using the optional BNC/VGA component video cable, if your computer provides video output through BNC connectors (see “Optional Accessories” on page 6).
3. If you’re using the optional BNC/VGA cable, connect the VGA connector to the projector’s Computer port and plug the BNC connectors into your computer’s monitor ports. 4. Optionally, you can connect an external monitor (see page 23), play sound through the projector (see page 24), or connect a USB cable to use the remote control as a mouse (see page 22). 5. When you’ve finished making any connections, see Chapter 2 for instructions on turning on the projector and adjusting the image.
Connecting to the BNC Connectors 1. Obtain a commercially available standard BNC cable. BNC cable 2. Plug the BNC connectors into the projector’s B/Cb/Pb, G/Y, and R/Cr/Pr connectors as shown below. Depending on your computer’s video card, you may have to connect to the projector’s V Sync and H/C Sync connectors too. (See your computer documentation for more information.) R/Cr/Pr G/Y B/Cb/Pb 3. Plug the connectors on the other end of the cable into the BNC video out connectors on your computer. 4.
Connecting to the DVI Port note Various types of DVI cables are offered on the market. Be sure to use only a cable with DVI to DVI or DVI to DFP connectors. 1. Obtain a DVI digital video cable (either DVI to DVI or DVI to DFP; see page 6 for details about ordering a cable from EPSON). 2. Connect the cable to the projector’s DVI port as shown. 3. Connect the other end to your computer’s DVI port. 4.
Using the Macintosh Desktop Adapter If you have an older desktop Macintosh or PowerBook, the VGA cable may not fit when you try to connect it. If so, you’ll need to use the Macintosh desktop adapter to connect the VGA cable to your computer. This is available from EPSON (see page 6). 1. To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions. 2.
Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter, you can use the projector’s remote control as a wireless mouse. This lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away. note The remote mouse control function may not operate correctly on systems that have been upgraded from an earlier version of Windows.
Connecting an External Monitor If you want to monitor your presentation close-up (on a monitor placed beside the projector) as well as on the screen, you can connect an external monitor. You can use it to check on your presentation or switch between picture sources, even if you’ve pressed the A/V Mute button to turn off projection on the screen. note The monitor can display images from any connected computer or video source.
Playing Sound Through the Projector You can play sound through the projector’s speaker system, or you can attach an external speaker system. (Attaching speakers to the projector instead of directly to the audio source lets you use the projector’s remote control to adjust the sound.) Connecting Audio Equipment to the Projector To play sound through the projector, follow these steps: 1. Locate the appropriate audio cable (two types are included with the projector).
Connecting External Speakers To connect speakers to the projector, follow these steps: 1. Obtain the appropriate cable to connect your speakers. Depending on your stereo system, you may be able to use a commercially available audio cable with a stereo mini-jack connector on one end, and pin jacks on the other end. For some speaker systems, you may have to purchase a special cable or use an adapter to connect to your speakers. 2.
26 Setting Up the Projector
1 Displaying and Adjusting the Image W hether you’re presenting from a computer or video equipment, you need to follow some basic steps to display your image on the screen.
Projecting the Image Make sure your projector and other equipment are set up as described in Chapter 1. Then follow the instructions below to start the projector and display an image. Turning on the Projector note To shut down the projector, see page 43. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating.
4. Press the red P Power button on top of the projector—or press the P Power button on the remote control. (If this is your first time using the remote control, make sure the batteries are installed and the on/off switch on the side of the remote is turned on; see page 46.) Turn on remote Power button The Ppower light flashes green as the projector warms up, and an image begins to appear. When the Ppower light stops flashing and remains green (in about 40 seconds) the projector is ready for use. 5.
Selecting the Image Source note To focus and adjust the image, see page 34. If a projected image fails to appear, see page 31 for help. Selecting the image source lets you switch between images input from different pieces of equipment connected to the projector (such as a computer or DVD player). If you don’t see the image you want, select it using the Source buttons either on the projector or the remote control.
Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you see a blank screen or a blue screen with the No Signal message, try the following: ■ Make sure the cables are connected correctly, as described in Chapter 1. ■ Make sure the power light is green and not flashing and the lens cap is off.
■ If the function key doesn’t permit you to display simultaneously on both screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.
If you’re using OS 8.6 to OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. Click here Drag one monitor icon on top of the other 3. Drag one monitor icon on top of the other. If the Arrange option isn’t available, you may need to select one of the Simulscan resolution settings: 1. Click the Monitor icon.
Adjusting the Image Once you see your image, you need to make certain adjustments: ■ To focus or zoom your image, see below. ■ If the image is too high or too low, you can reposition it. See page 35. ■ If the image isn’t square, see page 36. ■ If a computer image displays incorrectly, see page 39. If you need to fine-tune the image and/or sound, see Chapter 4. Focusing and Zooming Your Image Use the Focus ring on the projector to sharpen the image.
Adjusting the Height of Your Image If the image is too low on the screen, you can use the front adjustable foot to raise it. 1. Stand behind the projector. Press the blue foot release lever up and lift the front of the projector. 2. Once the image is positioned where you want it, release the lever to lock the foot in position. 3. If necessary, you can fine-tune the height by turning the projector’s rear feet.
Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen with the base of the lens level with the bottom of the screen. Even if the projector is slightly tilted (within a range of 40° up or down), the projector has an automatic keystone correction function that detects and corrects vertical keystone distortion.
Using Keystone Correction To adjust your image when it is wider on one side, do the following: ■ Look at the shapes of the icons on the projector’s four Keystone buttons. Press the button whose icon is the mirror image of the shape of your screen image. Continue pressing the button until you are satisfied with the shape of the image. Keystone buttons ■ note The image will be slightly shorter after adjusting.
You see this screen: [ / ]:Adjust Adjust [ ] :Move next [ESC] :Return (Press 1 second to reset) note If you are not satisfied with the corrections made, press the ESC button for one second to reset the screen to its original shape. 5. Press the Enter button to select the corner you want to adjust. 6. Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape. 7. Repeat steps 5 and 6 as needed to adjust any remaining corners. 8.
Correcting Computer Images If you’re connected to a computer and the image doesn’t look right, press the Auto button on the remote control (or the Auto/Enter button on the projector’s control panel). This automatically resets the projector’s tracking, sync, resolution, and position settings. note You must be projecting an image for this button to have any effect. The Auto button works only with computer images.
Projecting Images Without a Screen Even if you don’t have a screen, you can project images onto surfaces like blackboards and colored walls without loss of image color. Your projector has a sensor that measures the conditions of the projection surface and automatically adjusts the colors and shading of your image. For example, if you’re projecting onto a surface near a window, your image appears clear and well-defined rather than faint.
Adjusting Color Corrections for a New Surface Adjust the correction values if you’re projecting on a new surface or in a new location. 1. Press the Wall Shot button on the remote control or projector while you’re projecting an image. Wait for the Wall Shot status screen. 2. Press the Wall Shot button until you see Wall Shot Readjustment on the status screen. You see a sequence of colors flash for about five seconds as the projector adjusts the color correction values for the new projection surface.
caution If you lose the remote control, you will not be able to enter the password. Keep the remote control in a safe place at all times. 2. Use the pointer button to set Security Lock to ON. Then press the Enter button. 3. Select Password and press the Enter button. 4. When you see a message asking if you want to change the password, select Yes and press Enter. 5. Press the Num button on the remote control. When it lights, the numeric keypad is activated. 6.
Shutting Down the Projector note When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating. 1. Turn off and disconnect any equipment plugged into the projector. 2. To turn off the projector, press the red P Power button on the projector or remote control.
44 Displaying and Adjusting the Image
1 Giving Your Presentation T he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 33 feet away. note For information and resources to help you give the most professional presentation, be sure to visit presentersonline.com.
Activating and Using the Remote Control The remote control has an on/off switch on its side, as shown. Before using the remote, make sure batteries are installed as described on page 48, then push up on the on/off switch to turn it on. On/off switch note If a button is pressed longer than 60 seconds, the remote control stops operating to conserve power. When you release the button, normal operation resumes.
Using the Navigation Buttons The remote control has various buttons that let you navigate the projector’s help and menu systems; they also let you use the drawing tools to highlight your presentation. If you’ve connected a computer, the buttons can be used in place of your computer’s mouse, letting you walk about freely while controlling your presentation.
Replacing the Batteries If the projector stops responding to the remote control, check the following: ■ Make sure the remote control’s on/off switch (shown on page 46) is in the ON position. ■ Press the light button and check to see if the buttons on the remote control light up. (If you’re in a bright room, you may not be able to see them light.) caution If the buttons do not light up, replace the batteries as described below: When replacing batteries, take the following precautions: 1.
Controlling the Picture and Sound You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, display a picture-in-picture image, and adjust the volume. note You can use the projector’s menus to fine-tune the picture and sound quality as described in Chapter 4.
Previewing Picture Sources You can use the Preview function to help you select the image source. 1. Press Preview on the remote control. Preview button You see the currently selected source displayed in the main window, as shown. All other sources (including the currently selected source) are displayed in smaller preview windows on the right side and at the bottom. If no equipment is connected to a port, or if there is no incoming signal, the preview window for that source appears blank.
Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound and darken your screen. (If you’ve connected an external monitor to the projector, it will continue displaying.) This feature is useful if you want to temporarily redirect your audience’s attention without the distraction of a bright screen. ■ To turn off the picture, press the A/V Mute button. The screen goes dark. ■ To turn the image back on, press the button again.
3. Continue pressing the E-Zoom area up to 4× . button to enlarge the selected 4. While the image is enlarged, you can: ■ Use the pointer button to pan about. ■ Press the E-Zoom button to zoom out. 5. When done, press the ESC button to return to the original size. Displaying a Picture-in-Picture Video note The Picture-in-Picture function does not work for RGB video images.
3. Once the window is located and sized the way you want it, press the Enter button; your video continues playing on the screen. Video window 4. When you’re finished viewing the Picture-in-Picture, press the P in P or pointer button again. The window disappears. Controlling the Volume To change the volume, press the or side of the Volume button. note To temporarily shut off the sound (and picture), press the A/V Mute button. If necessary, you can adjust the tone using the projector’s menu system.
Highlighting Your Presentation You can display a pointer to call out something on the screen, or draw straight or curved lines to emphasize particular points. There are three preset pointer tools you can choose from, and each one can be customized for a different look. Using the Pointer Tool 1. To activate the pointer tool, press the Effect button on the remote control. A pointer appears on the screen.
Customizing the Pointer Tools You can customize the shape and size of each of the three pointer tools, select the color and width of the line made with each pointer, and set how fast you can move the pointer across the screen. 1. Press the Menu button on the remote control, highlight the Effect menu, and press Enter.
Operating Your Computer with the Remote Control If you’ve connected a computer to the projector with a USB cable, as described on page 22, you can use the remote control in place of your computer’s mouse. This gives you more flexibility when delivering PowerPoint and other slideshow-style presentations, since you won’t have to stand next to the computer to change slides. Use to move cursor Left-click ■ Use the pointer button to move the cursor on the screen.
Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen to be displayed when the projector is not receiving a signal or when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use. Capturing the Image Start by displaying the image you want to use.
4. When you see the message Select this Image?, highlight Yes and press Enter. 5. Use the arrow buttons to select a zoom rate (display size), and then press Enter. 6. When the message Save image as user’s logo? appears, select Yes and press Enter. Saving the logo may take a few moments. Do not use your projector or video source (computer, DVD player, etc.) while the logo is being saved. 7. When you see the message Completed, press ESC to return to the menu screen.
Choosing When to Display the Image After your image is saved, you can set it up as the startup screen, or the screen you see when there’s no signal or when you press the A/V Mute button (see page 51). 1. Press the Menu button to display the menu screen (if not already displayed). 2. To display your image as the startup screen, highlight the Advanced1 menu, then press Enter. Select Startup Screen, highlight ON, then press Enter.
Controlling Multiple Projectors If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system. To operate a projector, you have to set the remote control’s ID to match that of the projector. Or you can control all of the projectors simultaneously by setting the remote control’s ID to zero. Setting the Projector ID The projector’s default ID is 1. If you need to change it, follow these steps: 1. Press the Menu button on the remote control.
Setting the Remote Control ID The remote control’s default ID is zero. If you need to change it, follow these steps: 1. Press the ID button on the remote control. You see it light. 2. Press one of the numbered buttons on the remote control to select the desired ID (0 through 9). Select zero to control all projectors, or select a number to match the ID of the projector(s) you want to operate. Nine Zero The ID button’s light shuts off and the new ID is registered.
62 Giving Your Presentation
1 Fine-tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features.
Using the Menu System You can use the remote control (or the projector’s control panel) to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button. You see a menu screen similar to the one shown below (the settings may differ from those shown here, depending on the selected input source): Options Position Adjust : 0000 Tracking Sync.
4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the Enter button to see a sub-screen for changing the setting. ■ Press the left or right side of the a slider bar. pointer button to adjust ■ To select from two or more settings, use the pointer button to highlight the desired setting, then press Enter. + - ON OFF 5.
Adjusting the Image Quality You can use the Video menu to adjust the brightness, sharpness, color, tint, and contrast. If you’re projecting from a computer (but not through the DVI port), there are additional adjustments you can make (see page 67). Adjusting Images from Video Sources 1. Press the Menu button on the remote control, then select the Video menu. You see the Video menu screen. (The actual settings may vary, depending on the selected input source.
■ Color Adjusts the color intensity, from black-and-white to full color (not available for RGB video images). ■ Tint Adjusts the tint of the image (not available for RGB video images). ■ Sharpness Adjusts the sharpness of the image. Adjusting Computer Images You can also adjust brightness, contrast, and sharpness when you’re projecting a computer image. In addition, if you’re projecting an analog RGB image transmitted through the Computer or BNC port(s), you can make several other settings.
■ Sync Adjust this value if the image appears blurry or flickers. ■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference between light and dark areas. Select Auto to let the projector adjust the contrast automatically, or select Manual to adjust the setting yourself. (Press Enter after you make the selection.) ■ Sharpness Adjusts the sharpness of the image.
Adjusting the Image Size, Shape, and Position Whether you’re projecting from a computer or video player, you can use these settings to adjust the size, shape, and position of the image. ■ Resize button Adjusts how an image fits into the display area. For computer images, resizing is normally unnecessary, since the projector automatically resizes the image to make the best use of the display area.
Adjusting the Color The projector provides several ways for you to adjust the color: ■ Color Mode button (also in the Video menu) Lets you quickly adjust the color and brightness for various environments. Use either the remote control or the Color Mode setting in the Video menu; you can save a different setting for each computer and/or video source.
Adjusting the Sound You can use the Audio menu to adjust the sound volume or treble/bass balance. 1. Press the Menu button on the remote control, then enter the Audio menu. note You can also adjust the volume using the remote control. You see the Audio menu screen: Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All [ ]: Select [ Computer/DVI Audio Input : Computer/DVI Volume Treble Bass Reset : : : 15 0 0 Computer DVI - + - + - + Execute ]: Enter [Menu]: Exit 2.
Customizing Projector Features You can use the menu system to change the video signal input at certain ports, turn sleep mode on or off, adjust the network settings, change the language, and customize several other features. Image Setup Options Use these settings to change how the projector processes incoming video signals. Several of these settings should normally be left at the factory default setting (except for the Computer and BNC Input settings).
■ BNC Sync Termination (in the Advanced2 menu) This setting should normally be left Off (for TTL input). If an analog (75-ohm) terminator is required, as for a switcher, change the setting to ON. Communication Setup Options These options let you set up the projector so it can be monitored and controlled from a remote computer (see Chapter 5).
Miscellaneous Setup Options ■ No-Signal Msg. (in the Setting menu) Selects a screen color or image to display when the projector is not receiving a signal. The logo setting displays an image that you previously transferred to the projector (see page 57). ■ Sleep mode (in the Setting menu) When sleep mode is on, the projector turns off the lamp if it has not received any input signals for 30 minutes. Turn sleep mode off if you want the lamp to remain on all the time (this is the default setting).
1 Managing the Projector from a Remote Computer Y our projector’s Easy Management software lets you monitor and control your projector(s) from a remote computer in several ways: ■ Use EMP Monitor to see your projectors’ status, switch image sources, and control basic settings. ■ Use EMP NetworkManager to receive e-mail notifications alerting you to possible problems. ■ Use a network management utility running SNMP, such as HP OpenView,™ to manage your facility’s equipment from a pre-existing system.
Installing the Easy Management Software The projector software CD-ROM includes the software you need to use the projector’s EMP Monitor and EMP NetworkManager. System Requirements Before you install the software, make sure your computer meets these requirements: note The Easy Management software cannot be installed on Macintosh systems. ■ Microsoft® Windows 98 SE, XP, 2000, Me, or NT 4.
2. Click the button to advance to the next screen. 3. If you want to receive e-mail notifications when projector problems occur, make sure Installing EMP Network Manager is highlighted, then click the button. Follow the instructions on the screen to finish installing it. 4. If you want to be able to manage the projector remotely from this computer, select Installing EMP Monitor and install it the same way. 5. When done installing the software, click the button to exit.
Connecting and Configuring the Projector Before using the Easy Management software to manage your projector(s), you have to connect each projector you want to monitor to your network and configure it with an appropriate IP address. 1. Connect the projector to your network using a commercially available 100baseTX or 10baseT network cable. Connect the cable to the Ethernet port on the projector as shown. Ethernet port 2. Turn on the projector (see page 28). 3.
5. If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, Gateway Address, and MAC Address, as needed. ■ To enter numbers using the remote control, press the Num button until it lights, then use the number keypad shown below. Zero Num button ■ note If you’re a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you’re monitoring.
Using EMP Monitor EMP Monitor lets you manage all your projectors using a remote computer. This lets you easily turn the projectors on or off (together or individually), switch image sources, and check on their status. Before using EMP Monitor, make sure you’ve installed the software as described on page 76. The computer you’re using to monitor the projector should already be connected to your network.
Registering a Projector Before you can monitor a projector, you have to register it. Follow these steps: 1. Click Start > Programs or All Programs > EPSON Projector > EMP Monitor. You see this screen: Click here 2. Click Register projector as shown. You see this screen: Click here note 3. Click Auto detect to locate projectors currently operating on the network. Or click Manual registration and enter the projector’s name and network address.
Any projectors found on the network are listed as shown below: Click here 4. Select each projector you want to add by clicking its name, then clicking the Add button. When you’re done adding projectors, click Close. note You see this screen with a list of all registered projectors. To delete a projector from the list, highlight the projector name, and click Delete. 5. Click Close.
You see the status of each of your registered projectors on the main EMP Monitor screen: Monitoring Your Projectors The EMP Monitor screen lets you monitor your projectors using the Status, Video Source, and Error icons shown below. This lets you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs.
The following table explains the meaning of the status icons: Status icons (green) Projecting; no problems (dark) Turned off; no problems (green) Projecting; problems detected (dark) Turned off; problems detected Network error (for example, not connected to network, or power cable disconnected). You may also see this error if Network OFF is selected in Standby Mode (see page 73).
The following table explains the meaning of the error icons (see Chapter 7 for recommended solutions to problems): Error icons Lamp replacement notification (the lamp is nearing the end of its life; see page 96) High-speed cooling in progress (the projector is getting too hot but continues to operate) Overheating (projection turned off automatically) Lamp out or lamp cover open Fan error Sensor error Internal problem Controlling Your Projectors The control buttons in the upper-right let you turn on and off
Configuring the Monitoring Interval If you need to have the most current status information about your projectors, click the Refresh button in the EMP Monitor screen. You can also select how often EMP Monitor checks the projector status: 1. From the Tool menu, select Configuration. You see this screen. note If you want EMP Monitor to run whenever you start your computer, click Add to Startup. 2. Select the desired update interval and click OK.
Using EMP NetworkManager You can use EMP NetworkManager to send out messages by e-mail, notifying you when a problem occurs with a projector. Before running EMP NetworkManager, make sure you’ve installed the software as described on page 76. Then follow the steps below to create e-mail settings for each projector you want to monitor. Selecting the Projectors to Monitor 1. To start EMP NetworkManager, click Start > Programs or All Programs > EPSON Projector > EMP NetworkManager.
3. Enter the projector’s IP address and click Add. The projector’s icon is added to the EMP NetworkManager screen. Setting a Password You can set a password to restrict access to each projector from EMP NetworkManager: 1. Right-click the icon of the projector whose password you want to set, then select Change Password. 2. Enter a password up to 14 characters in length. Creating the E-Mail Settings 1. If EMP NetworkManager is not already running, open it from the Start menu.
3. EMP NetworkManager connects to the projector, and you see this screen: 4. Verify that the network settings are correct. (If DHCP is on, you don’t need to verify network settings.) ■ Make any desired changes to the projector’s network address configuration (turning off DHCP enables the manual settings). ■ You can give the projector a name—up to 15 characters long, including the following symbols: ! @ # $ % ^ & ' .
6. Select ON for the Mail Notification setting. 7. Enter the IP address and port number of the SMTP server used for sending e-mail. (The port’s default setting is 25, but you can enter any number from 1 to 65535.) 8. Enter up to three e-mail addresses where you want the event notification messages to be sent. note A no-signal message is reported when no image signals are being input to a projector.
Understanding the Notification Messages If a projector experiences a problem, it sends an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes the heading “EPSON Projector” in the subject line. The body of the message contains: ■ the name of the projector ■ the projector’s IP address ■ a description of the problem The problem descriptions are similar to the errors reported by EMP Monitor listed on page 85.
92 Managing the Projector from a Remote Computer
1 Maintaining the Projector Y our projector needs little maintenance. All you have to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. Remove the cap before cleaning Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord.
Cleaning the Air Filters and Vents Clean the air filters and air intake vents after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: 1. Turn off the projector and unplug the power cord. 2. To clean the intake vents, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment.
4. If the dirt is difficult to remove or a filter is broken, replace the filters as described on the next page. Contact your dealer or call EPSON at (800) 873-7766 in the United States to obtain new ones. In Canada, please call (800) 463-7766 for dealer referral. Replacing the Lamp and Air Filters note When you get a replacement lamp for your projector, new air filters are included. You should replace the filters when you replace the lamp. You can check how long the lamp has been in use (see page 99).
4. Turn the projector over and remove the air filters at the side and bottom of the projector. . . . and here Slide the filter up here . . . 5. Insert the two new air filters. They should click into place. 6. Insert the screwdriver supplied with the spare lamp, or some other flat-tipped screwdriver, into the space beside the air vent. Gently slide the lamp cover off.
7. Loosen the two screws holding the lamp in place (you don’t need to remove them). 8. Grasp the wire handle as shown and pull the lamp straight out. note When you get a replacement lamp for your projector, new air filters are included. This is a good time to install them (see page 96). 98 9. Gently insert the new lamp. 10. Once the lamp is fully inserted, tighten its screws and replace the cover. (The projector won’t come on if the lamp cover is loose.) 11.
Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu. 1. Press the Menu button on the remote control (or on the projector’s control panel). You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight About, then press Enter. You see this screen: Video Lamp Audio Reset Lamp Timer Effect Setting Video Source : Computer1 Input Signal : Analog-RGB User's Logo Frequency : H ---.
Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent injury or damage: note ■ When hand-carrying the projector, you should use the handle to lift it only a short distance (for example, to set it on a table). ■ When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector.
1 Solving Problems This chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Help for the image ■ Help for the sound ■ Language selection (Language) Follow these steps to get help: 1. Press the blue ? Help button on the projector. Help button on projector You see the Help menu: doesn't 2.
Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the P power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.
Status lights Light Status Description flashing orange Rapid cooling in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises too high again. Make sure there is plenty of space around and under the projector for ventilation, and that the air filters and vents are clear. red The projector is overheating, which turns the lamp off automatically. Wait until the cooling fan stops, then unplug the power cord.
Viewing Lamp Usage and Other Information Use the About menu to view information about the display settings of your computer and the number of hours the lamp has been used. 1. Press the Menu button, then highlight the About menu and press Enter. You see the lamp usage hours and various input signal settings on the right: Lamp usage note The information displayed depends on the input signal currently selected.
Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the P power light is green, not flashing, and the lens cap is off. ■ The projector may be in sleep mode. If the P power light is orange, press the Power button to turn the projector on. ■ If the power was switched off and then on again, the projector may still be cooling down. Wait until the power light stops flashing and remains orange; then press the Power button again.
If you’re using a PC laptop: ■ Hold down the Fn key on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s manual or online help for details. On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time.
The message Not Supported is displayed. ■ Make sure the correct Input Signal is selected in the Setting menu (see page 72). ■ Make sure your computer’s resolution doesn’t exceed UXGA (1600 × 1200), and the frequency is supported by the projector (see page 120). If necessary, change your computer’s resolution setting as described on the following page. Only part of the computer image is displayed. ■ Press the Auto button on the remote control.
The image isn’t square, but keystone-shaped. ■ If the top or bottom of the image is broader, press the Sync + or Sync - button on the projector until the image is square. ■ If the projector is angled toward the screen from the left or right, the image will be broader on one side. Center the projector in front of the middle of the screen, facing the screen squarely. If this doesn’t work, press the Tracking + or Tracking - button on the projection until the image is square.
■ Adjust the Sharpness setting on the Video menu (see Chapter 4). When you change video settings, you should be able to see the effect on the screen immediately. If you’re projecting from a computer, you may also need to adjust the tracking and sync as described in the next section. If you don’t like the new settings, you can always select Reset to return to the factory default settings. You see vertical stripes, or the image still looks blurry after trying the solutions in the previous section.
3. Adjust the Sync setting to increase the sharpness of the image. The colors of the image are not right. ■ If you’re displaying a computer image, use the Color Mode option in the projector’s Video menu to adjust the color. If you’re displaying video, adjust the Color, Tint, and Color Mode settings on the Video menu. ■ Try changing the Color Adjustment setting on the Advanced1 menu. ■ Check your computer display settings to correct the color balance.
Solving Easy Management Problems You don’t see your projector in the EMP Monitor window. ■ Make sure that you’ve connected the projector to the network and configured it correctly; see page 78. Also, make sure you’ve registered the projector with EMP Monitor. See page 81. ■ Make sure that Standby Mode in the Advanced1 menu is set to Network ON. ■ If the computer you are using is running Windows XP, 2000, or NT 4.x, you must be logged in as the Administrator. ■ Try restarting your computer.
Where To Get Help EPSON provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Service Access World Wide Web From the Internet, you can reach EPSON’s product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice through e-mail.
114 Solving Problems
A Appendix A: Projector Installation T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room.
If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to tilt it down to position the image on-screen. This causes the image to lose its square shape. You can then correct the distortion by using the Keystone function in the projector’s menu system (see page 69) or by using the Keystone buttons on the projector’s control panel.
A Appendix B: Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 1.0 inch (25.4 mm) Lens F=1.7 to 2.3, f=28 to 37 mm Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 24 bit, 16.7 million colors Brightness 3500 lumens (ANSI) Contrast ratio 700:1 Image size 30 to 300 inches Projection distance 2.6 to 36.1 feet (0.
Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 250 W Lamp life Up to 2000 hours (high brightness mode) Up to 3000 hours (low brightness mode) Part number V13H010L22 Remote Control Range 33 feet (10 meters) Batteries (2) Alkaline size AA Mouse Compatibility Supports USB Dimensions Height 4.6 inches (117 mm), feet retracted Width 16.5 inches (419 mm) Depth 12.8 inches (325 mm) Weight 12.1 lb (5.
Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (-10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States FCC 47CFR Part 15B Class B (DoC) UL1950 Rev. 3 Canada ICES-003 Class B CSA C22.2 No.
Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector; see the following table for compatible formats. As noted below, some images are automatically resized to display in one of the projector’s “native” formats (such as XGA).
Mode Refresh Rate (Hz) Resolution UXGA—60 UXGA—65 UXGA—70 UXGA—75 UXGA—80 UXGA—85 60 65 70 75 80 85 1600 × 1600 × 1600 × 1600 × 1600 × 1600 × MAC13 MAC16 MAC19 MAC21 67 75 75 75 640 × 480* 832 × 624* 1024 × 768 1152 × 870* NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM 60 60 50 50 60 60 50 — — — — — — — HDTV (720p) HDTV (1080i) 60 60 1024 × 576* 1024 × 576* SDTV (480i) SDTV (480p) SDTV (625i) SDTV (625p) 60 60 50 50 1024 × 1024 × 1024 × 1024 × *The 1200* 1200* 1200* 1200* 1200* 1200* 768 76
122 Appendix B: Technical Specifications
A Appendix C: Notices This appendix includes safety instructions and other important information about your EPSON PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.
124 Appendix C: Notices ■ Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the projector. ■ Ambient light is too bright. ■ Certain types of fluorescent lighting are used. ■ A strong light source shines into the IR receiver.
Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc.
FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC.
130 Appendix C: Notices
Index A A/V Mute, 59 A/V Mute button, 51, 106 About menu, 99, 105 Accessories, 6, 113 Adapter, Macintosh, 5, 6, 21 Air filter cleaning, 95 to 96 ordering, 6 replacing, 96 to 97 Anti-theft device, 6, 9 Aspect ratio, 117 Audio adjusting volume, 71 connecting equipment, 24 to 25 menu, 71 problems, troubleshooting, 111 turning off (using A/V Mute), 51 Auto button, 39 B Bass, adjusting, 71 Batteries, installing, 48 Blank screen, 31 to 33 Blurry image, 109 Brightness, 117 Brightness setting, 66 C Cables BNC, 19
E Easy Management configuring the projector, 78 to 79 monitoring the projector, 80 to 86 problems, 112 receiving e-mail alerts, 87 to 90 system requirements, 76 Electrical specifications, 118 EMP Monitor changing monitoring interval, 86 installing software, 76 to 77 using, 80 to 86 EMP NetworkManager installing software, 76 to 77 using, 87 to 91 Environmental specifications, 119 EPSON accessories, 6, 113 presentation tips, 2 PrivateLine Support, 2, 113 technical support, 2, 113 E-Zoom button, 51 to 52 F FC
M Macintosh desktop adapter, 5, 6, 21 Manuals, 2 Menus About, 99, 105 Audio, 71 changing settings, 64 to 65 default settings, restoring, 65 User’s Logo, 57 to 58 using, 64 to 65 Video, 66 to 68 Monitor, connecting external, 23 Monitoring projector EMP Monitor, 80 to 86 HP OpenView, 75 receiving e-mail alerts, 87 to 91 Mouse connecting cable for remote, 22 using remote control as, 56 N Network managing projector remotely, 75 to 91 setting, 73, 83, 85, 89 New Hardware Wizard, 29 No Signal message, 31, 74, 10
Q Raising image, 35 Rear-screen projection, 74, 115 Registration, 3 Remote control as wireless mouse, 56 battery used, 118 connecting cable for mouse, 22 information, 125 numeric keypad, using, 42 problems, 112, 125 range, 118 replacing batteries, 48 running slideshow with, 22 setting ID, 61 specifications, 118 storing, 46 troubleshooting, 112 turning on, 46 using, 45 to 61 Replacing lamp, 96 to 99 Resetting lamp timer, 99 Resetting menu options, 65 Resize image, 69 Resolution, 68, 117 Sound adjusting, 71
Troubleshooting blank screen, 31 to 33 cut-off image, 108 distorted image, 36 to 38 Easy Management, 112 image and sound problems, 106 to 111 no signal, 31, 106 to 107 projector problems, 101 to 104 remote control problems, 112 Turning off picture (using A/V Mute), 51 Turning off projector, 43 W Wall Shot, 40 to 41 Warning lights, 103 to 104 Warranty, 3, 128 to 129 Wireless, mouse, 22, 56 Z Zoom ratio, 117 Zooming image, 34, 51 to 52 U Unpacking projector, 4 USB cable, 4, 22 User’s Logo menu, 57 to 58 V
136 Index
Front/Top Focus ring Remote Control Zoom ring Temperature light Lamp light Power light Page Up and Down Changes slides in PowerPoint Control panel Air exhaust vent E-Zoom button Enlarges section of image Remote control receiver A/V buttons Control image and sound Foot release lever Air filter Light button Illuminates remote control buttons Adjustable foot Handle Enter and ESC Use as mouse buttons or to make menu selections Lens cover Menu button Activates menu system Power button Turns the proj
Front/Top Focus ring Remote Control Zoom ring Temperature light Lamp light Power light Page Up and Down Changes slides in PowerPoint Control panel Air exhaust vent E-Zoom button Enlarges section of image Remote control receiver A/V buttons Control image and sound Foot release lever Air filter Light button Illuminates remote control buttons Adjustable foot Handle Enter and ESC Use as mouse buttons or to make menu selections Lens cover Menu button Activates menu system Power button Turns the proj