User Guide
Epson Projector Control
User’s Guide
The Epson
®
Projector Control software lets you control the projector over a
wired or wireless network from a computer running Windows
®
2000 SP4,
XP SP2 32-bit, or Windows Vista
™
32-bit. It enables you to perform
operations, such as turning the projector on/off and switching sources,
from your computer without using the projector’s remote control.
Note: Macintosh
®
systems are not supported.
To install the Projector Control software, double-click the installer icon and
follow the on-screen instructions.
Make sure the following requirements are met before starting the Projector
Control software:
■ The Projector Control software is installed on your computer
■ Your computer and the projector are connected to the same network
and you can access the projector
■ The Network setting in the projector’s menu is set to On
Connecting to the Projector
1. In Windows, click Start > Programs > EPSON Projector >
Projector Control. You see a window like this: