Product Information Guide

ManualsBrandsEpson ManualsPrintersEpson Epson PowerLite 9100NL

EPSON PowerLite 8200i/9100i Projector

1/02 EPSON PowerLite 8200i/9100i - 1

Projector Specifications

General

Type of display: Poly-silicon Thin Film Transistor (TFT)

Size of liquid

crystal panels: Diagonal: 1.3 inches (34 mm)

Lens: 8200i: F=1.7 to 2.3, f=49 to 63 mm

9100i: F=1.8 to 2.4, f=49 to 69 mm

Resolution: 8200i: 1024

768 pixels

9100i: 1280

1024 pixels

Color reproduction: 24 bit, 16.7 million colors

Brightness: 8200i: 3500 lumens (ANSI)

9100i: 2400 lumens (ANSI)

Contrast ratio: 8200i: 600 : 1

9100i: 300 : 1

Image size: 8200i:

Wide angle: 28 to 300 inches

(at 3.3 to 37.3 feet distance)

Tele angle: 21 to 300 inches

(at 3.1 to 48.1 feet distance)

9100i:

Wide angle: 30 to 320 inches

(at 3.6 to 36.7 feet distance)

Tele angle: 20 to 300 inches

(at 4.6 to 51.8 feet distance)

Projection distance: 8200i: 3.1 to 48.1 feet

(0.9 to 14.6 meters)

9100i: 3.6 to 51.8 feet

(1.1 to 15.8 meters)

Projection methods

Front, rear, upside-down (ceiling mount)

Internal speaker

system: 2

3 W 8 (

Ω

) speakers

Optical aspect ratio: 4 : 3 (horizontal : vertical)

Zoom ratio: 8200i: 1 : 1.3

9100i: 1 : 1.4

Manual lens shift: 0 to 10°

Keystone correction

angle: ±30°; ratio: 10 : 5.5

foot adjust

lever

control panel

status lights

front infrared

receiver

foot adjust

lever

speakers

handle

zoom ring

focus ring

lens shift knob

adjustable feet

A/C power

inlet

rear infrared

receiver

see below

Monitor Out

Stack Out

Computer 2 /

Component Video

Computer 1

Audio

Mouse/Com

S-Video S-Audio/Audio2 L-Audio-RVideo

Remote

R/Cr/Pr

B/Cb/Pb H/C Sync V SyncG/Y

DVI connector

VGA (video in) connector

BNC connectors

(for Computer 2

or component

video source)

DVI / VGA

switch

remote IR

receiver

connector

S-Video

connector

Stack Out connector

Monitor Out

connector

S-Video and BNC

audio connectors

composite video

connector

Audio

connector

audio connectors

for composite

video

Mouse/Com

connector

Summary of content (12 pages)

PAGE 1
EPSON PowerLite 8200i/9100i Projector Projector Specifications front infrared receiver control panel speakers status lights focus ring General Type of display: Poly-silicon Thin Film Transistor (TFT) Size of liquid crystal panels: Diagonal: 1.3 inches (34 mm) Lens: 8200i: F=1.7 to 2.3, f=49 to 63 mm 9100i: F=1.8 to 2.4, f=49 to 69 mm handle Resolution: foot adjust lever Color reproduction: 24 bit, 16.
PAGE 2
EPSON PowerLite 8200i/9100i Projector Projection Lamp Type: UHE (Ultra High Efficiency) Safety United States: Power consumption: 230 W Canada: Lamp life: About 2000 hours Part number: ELPLP11 CE Marking: Remote Control Range: 32.8 feet (10 meters) Batteries: Alkaline AA (2) FCC Part 15J Class B UL1950 Rev. 3 DOC SOR/88-475 CSA C22.2 No. 950 Rev.
PAGE 3
EPSON PowerLite 8200i/9100i Projector Compatible Video Formats The projector supports the following international video standards: NTSC, NTSC 4.43, PAL, PAL 60, PAL-M, PAL-N, and SECAM. In addition, the projector supports the computer monitor display formats listed below. To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector; see the following table for compatible formats.
PAGE 4
EPSON PowerLite 8200i/9100i Projector Frequency Mode Resolution H (KHz) V (Hz) Pixel (MHz) PowerLite 8200i PowerLite 9100i UXGA48i UXGA60 UXGA65 UXGA70 UXGA75 UXGA80 UXGA85 1600 x 1200 1600 x 1200 1600 x 1200 1600 x 1200 1600 x 1200 1600 x 1200 1600 x 1200 62.5 75 81.25 87.5 93.75 100 106.25 48.04 60 65 70 75 80 85 135 162 175.5 189 202.5 216 229.
PAGE 5
EPSON PowerLite 8200i/9100i Projector Calculating Image Size and Projection Distance Use the formulas below either to find out how large your image will be when you know the distance from the projector to the screen, or to find out how far from the screen to place the projector if you want an image of a certain size. Since the size of the image can be changed by rotating the zoom ring, formulas are given for calculating both the minimum and maximum sizes.
PAGE 6
EPSON PowerLite 8200i/9100i Projector Extra Long Throw Zoom Lens (ELPLL03) Selecting the Video Source To determine the diagonal size of an image when you know the projection distance: If the projector is connected to more than one computer and/ or video source, you can use the buttons on the remote control or the control panel to switch between the different sources. ❏ Inches: Maximum diagonal size = (0.231 × projection distance) + 2.2 Minimum diagonal size = (0.171 × projection distance) + 1.
PAGE 7
EPSON PowerLite 8200i/9100i Projector ❏ To raise the image using the projector’s feet, stand behind the projector and hold up the front while you squeeze the blue foot release levers against the projector. This unlocks the feet. If you’re using a Macintosh laptop with OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. Select System Preferences from the Apple menu and click Displays. 2. Click Detect Displays. 3.
PAGE 8
EPSON PowerLite 8200i/9100i Projector Resizing the Image If only part of your computer screen is displayed, your computer may be set for a higher resolution than the projector’s “native” display: 1024 × 768 pixels (PowerLite 8200i) or 1280 × 1024 (PowerLite 9100i). You can resize the image to fit the resolution of your projector. Light Status Description and action Flashing orange The lamp is almost burned out. This is a good time to replace it.
PAGE 9
EPSON PowerLite 8200i/9100i Projector IR output Button Function A/V mute Turns off the audio and video, displaying the black, blue, or user logo background. E-Zoom Enlarges or reduces the image size from 1x to 4x (in 24 steps). Pressing the right side of the button enlarges the image, pressing the left side of the button reduces the image. To display a portion of an enlarged image which is outside the display area, press the Enter button and scroll the image to the desired location.
PAGE 10
EPSON PowerLite 8200i/9100i Projector The five special effects buttons are preprogrammed with the following functions. Button Function 1 Changes the mouse cursor to an arrow or stamp. 2 Lets you draw one or more boxes on the screen. 3 Spotlights a section of the screen. 4 Lets you place a vertical or horizontal bar on the screen to highlight a part of your image. 5 Erases the drawing effects on the screen.
PAGE 11
EPSON PowerLite 8200i/9100i Projector 5. Insert the new filter as shown. Cleaning and Replacing the Air Filter Clean the air filter at the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: 1. Turn off the projector and unplug the power cable. 2.
PAGE 12
EPSON PowerLite 8200i/9100i Projector 4. Use a screwdriver to loosen the three screws holding the lamp unit in place. (You cannot remove these screws completely.) Then lift the handle and pull out the lamp unit. Product Product number Customized carrying cases for the projector and its cables: 5. Gently insert the new lamp as shown below. Make sure it’s inserted securely. Tighten the screws on the new lamp.