PowerLite® Pro Cinema LS9600e/LS10000 User's Guide
Contents PowerLite Pro Cinema LS9600e/LS10000 User's Guide .......................................................................... 9 Introduction to Your Projector ................................................................................................................. Projector Features.............................................................................................................................. Product Box Contents..................................................................
Connecting to a Computer for HDMI Video ............................................................................... Connecting to External Speakers .................................................................................................. Connecting to a Trigger Out Port ................................................................................................... Installing Batteries in the Remote Control .....................................................................................
Changing the Image Aspect Ratio ................................................................................................. Available Image Aspect Ratios ...................................................................................................... Color Mode......................................................................................................................................... Changing the Color Mode..............................................................................
Maintaining and Transporting the Projector ......................................................................................... Projector Maintenance ..................................................................................................................... Cleaning the Lens........................................................................................................................ Cleaning the 3D Glasses .............................................................................
Where to Get Help............................................................................................................................ 141 Technical Specifications ........................................................................................................................ General Projector Specifications ...................................................................................................... Projector Light Source Specifications...............................................
PowerLite Pro Cinema LS9600e/LS10000 User's Guide Welcome to the PowerLite Pro Cinema LS9600e/LS10000 User's Guide.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual.
• Watch both HDMI sources simultaneously with Picture-In-Picture mode • One MHL (Mobile High-definition Link)-compatible HDMI port on the WirelessHD Transmitter for highquality audio and video from tablets and smartphones (PowerLite Pro Cinema LS9600e) Easy-to-use setup and operation features • Laser light source provides up to 30,000 hours of operation • Powered lens memory function for maintaining constant height for up to five different aspect ratios • Vertical and horizontal lens shift, and vertical key
1 Projector 2 Remote control 3 Remote control batteries (two AA alkaline) 4 Power cord 5 Projector documentation CD 6 3D glasses (2 pairs) 7 WirelessHD Transmitter (PowerLite Pro Cinema LS9600e) 8 WirelessHD Transmitter AC adapter (PowerLite Pro Cinema LS9600e) 9 HDMI cable clamps (2) Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional components: • To receive a component video signal, you n
• To receive an HDMI signal, you need a compatible HDMI cable. You can purchase one from Epson or an authorized Epson reseller. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options.
Related tasks Replacing the Air Filter Warranty and Registration Information Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty brochure that came with your projector. In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico.
Projector Part Locations Check the projector part illustrations to learn about the parts on your projector.
7 Air exhaust vents Parent topic: Projector Part Locations Projector Parts - Rear 1 Remote receiver 2 Projector ports 3 Cable clamp 4 Cable cover screw holes 5 Air intake/Air filter cover Parent topic: Projector Part Locations 16
Projector Parts - Interface Ports 1 HDMI1 / HDMI2 ports 2 HDMI cable clamp slots (2) 3 LAN port 4 Service port 5 RS-232C port 6 PC port (VGA) 7 Component ports 8 Trigger out 1 and Trigger out 2 ports 9 Video port Parent topic: Projector Part Locations 17
Projector Parts - Base 1 Air intake vent 2 Screw holes for anamorphic lens 3 Adjustable front feet 4 Mounting bracket holes 5 Power inlet Parent topic: Projector Part Locations 18
Projector Parts - Control Panel and Projector Lights 1 Temp light 2 Laser light 3 Status light 4 Power light 5 Power button 6 Source button (cycles through the list of sources) 7 Lens button (cycles through the lens adjustment options) 8 Menu button (accesses configuration menus) 9 Directional thumbstick (push in for OK button; controls menu selection and keystone adjustment) 10 Esc button 19
Parent topic: Projector Part Locations Related references Projector Light Status Projector Parts - Remote Control Top buttons Left: PowerLite Pro Cinema LS10000 Right: PowerLite Pro Cinema LS9600e 1 On button (turns on projector) 2 Standby button 3 Illumination button (lights the remote control) 4 Blank button (turns off video projection) 5 P-in-P button (controls the Picture-in-Picture mode for HDMI inputs) 6 Source buttons (select specific video input sources) 7 HDMI Link control buttons (c
9 Volume up/down buttons (adjust volume for devices connected via HDMI Link) Center buttons 1 Lens button (cycles through the lens adjustment options) 2 Color Mode button (selects display modes) 3 2D/3D button (cycles between 2D and 3D modes) 4 Arrow buttons (move though on-screen options) 5 Enter button (selects options) 6 Default button (returns selected setting to default value) 7 Menu button (accesses projector menu system) 8 Esc button (cancels/exits functions) Bottom buttons Left: P
Right: PowerLite Pro Cinema LS9600e 1 Memory button (accesses the Memory menu) 2 Lens 1 / Lens 2 buttons (loads a saved lens position) 3 3D Format button (changes the 3D format) 4 Frame Int button (adjusts the Frame Interpolation setting) 5 SupRes/4K button (PowerLite Pro Cinema LS10000; reduces blurring around the edges of images when viewing 3D content, or adjusts the 4K Enhancement setting for ultra-high-definition images) Super Res button (PowerLite Pro Cinema LS9600e; reduces blurring around
Parent topic: Projector Part Locations 23
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Removing and Attaching the Cable Cover Projector Connections Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Rear Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If the projector cannot be centered in front of the screen, use lens shift to reposition the image instead of using keystone correction for better image quality. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
Parent topic: Projector Placement Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.
Screen or image size Projection distance (1) Offset from lens center Offset from lens center (2) (3) Wide to Tele 120 inches (304.8 cm) 164.6 to 350 inches 28.7 inches (73 cm) 100.8 inches (256 cm) 35.8 inches (91 cm) 126 inches (320 cm) 48 inches (122 cm) 168.1 inches (427 cm) (418 to 889 cm) 150 inches (381 cm) 205.9 to 437.8 inches (523 to 1112 cm) 200 inches (508 cm) 275.2 to 583.
Removing and Attaching the Cable Cover Before you can connect equipment to your projector, you need to remove the cable cover. 1. Remove both of the cable cover screws (screwdriver not included). 2. Lift off the cable cover.
To attach the cable cover, slide it into position and tighten the screws. Parent topic: Setting Up the Projector Projector Connections You can connect the projector to a variety of computer, video, and audio sources to display presentations, movies, or other images, with or without sound. • For video projection, connect devices such as DVD players, gaming consoles, streaming devices, digital cameras, smartphones, and tablets with compatible video output ports.
Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. 1. Connect the HDMI cable to your video source's HDMI output port. 2. Connect the other end to one of the projector's HDMI ports. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source.
2. Insert the end of the cable clip anchor into the cable clip slot near the HDMI port. 3. Place the open cable clip around the HDMI cable, but don't lock it into place. 4. Slide the cable clip onto the anchor and lock the clip onto the HDMI connector. To remove the cable clip, open the clip and disconnect the HDMI cable. Then pinch the sides of the cable clip anchor and carefully pull it out of the cable clip slot.
Parent topic: Connecting to Video Sources Related topics Using WirelessHD Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr.
2. Connect the other end to the projector's Video port. Parent topic: Connecting to Video Sources Connecting to Computer Sources Follow the instructions in these sections to connect a computer to the projector. Connecting to a Computer for VGA Video Connecting to a Computer for HDMI Video Parent topic: Projector Connections Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable.
4. Tighten the screws on the VGA connector. Parent topic: Connecting to Computer Sources Connecting to a Computer for HDMI Video If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. 1. Connect the HDMI cable to your computer's HDMI output port. 2.
connection provides the best image quality, if available). You can also connect speakers to any video source that has its own speaker connections. 1 Video source 2 Surround sound speakers 3 Receiver 4 Video cable Parent topic: Projector Connections Connecting to a Trigger Out Port You can connect your projector to external devices such as motorized screens that support a trigger signal. When active, a 12V signal is sent to the connected device while the projector is powered on. 1. Connect a 3.
2. Connect the other end to one of the projector's Trigger Out ports. 3. Activate the trigger port in the projector's Settings menu. Parent topic: Projector Connections Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Remove the battery cover.
2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Monitoring and Control Setting Up Projector Network E-Mail Alerts Setting Up Network Monitoring Controlling a Networked Projector Using a Web Browser Wired Network Monitoring and Control You can monitor, configure, and control your projector through a wired network. You can also send email alerts from the projector when a problem occurs.
Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter.
5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control. • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web.
7. Select the Wired LAN menu and press Enter. 8. Select IP Settings and press Enter. 9. Select your IP Settings as necessary: • If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. When manually entering IP Settings, you cannot use restricted IP addresses. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. 10. To prevent display of the IP address on the standby screen, turn off IP Address Display. 11.
2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Mail menu and press Enter. 5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server option. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25). 8.
Network Projector E-mail Alert Messages Parent topic: Using the Projector on a Network Network Projector E-mail Alert Messages When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mail containing the following information: • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector • Detailed information about the problem Note: If a critical problem causes a projector to shut dow
4. Select the Others menu and press Enter. 5. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected. 6. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4 SDDP setting to allow the projector to be detected (PowerLite Pro Cinema LS10000). 7. If you are connecting to a network using Bonjour, turn on the Bonjour setting. 8.
1. Make sure the projector is turned on. 2. Start your web browser on a computer or device connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. Note: If you connect from a web browser on a smartphone or tablet, a screen with two options is displayed. Select remote to display the Web Remote page, or select config to display the Web Control page. You see the Web Control screen.
You see a screen like this: 1 Turns the projector on 2 Turns the projector off 3 Selects HDMI1, HDMI2, WiHD (PowerLite Pro Cinema LS9600e), 3RCA (component), Video, and PC port sources 4 Blank button control 5 Switches between 2D and 3D projection 6 Loads a saved lens position 6. Select the icon corresponding to the projector function you want to control.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features.
1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3. Press the power button on the projector or the On button on the remote control to turn on the projector. The shutter opens and the Status light flashes blue as the projector warms up. Once the projector is warmed up, the Status light stops flashing and turns blue.
Turning Off the Projector Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown. Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Note: When using the Blank feature, the laser is still on. To turn off the laser, turn off the projector. 1.
3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status light is on or flashing. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Viewing 3D Images You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device and a pair of Epson RF 3D glasses.
4. Press the 2D/3D button on the remote control to activate 3D mode, if necessary. 5. Slide the power switch on the 3D glasses to the On position. 6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector. Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing.
Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI or WirelessHD (PowerLite Pro Cinema LS9600e). 3. Project a 3D image. 4. Slide the power switch on the 3D glasses to the On position. 5. Move the glasses within 10 feet (3 m) of the projector, then hold down the Pairing button on the glasses for at least three seconds.
Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable. 2. Do one of the following: • Plug the other end of the charging cable into a powered USB port on a computer or other device.
3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 1 32 ft (10 m) Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button.
3. Select the Settings menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet. 1.
2. If the image is tilted, rotate the front feet to adjust their height. 3. Use the Lens button on the remote control to adjust the position of the projected image as necessary. If the projected image is unevenly rectangular, you need to adjust the image shape.
2. Press the Lens button on the control panel or remote control. 3. Press the Lens button repeatedly until Adjust Lens Shift is displayed on the screen. 4. Press the arrow buttons on the remote control or use the thumbstick on the control panel to adjust the position of the projected image as necessary.
1 Center of lens 2 Projected image when lens shift is set in the center 3 Maximum vertical range (V × 90%) 4 Maximum horizontal range (H × 40%) Note: You cannot move the image to both the horizontal and vertical maximum values. 5. When you are finished, press the Esc button on the control panel or remote control. Note: When adjusting the image height, position the image lower than where you want it to be and then move it up. This will help prevent the image from moving down after adjustment.
2. Move the thumbstick on the control panel up or down to display the keystone adjustment sliders, then continue moving the thumbstick up or down to adjust the image shape. 3. Push in the thumbstick on the control panel to set the keystone value. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the Keystone settings in the projector menus.
2. Press the Lens button on the projector's control panel or remote control. 3. Press the Lens button repeatedly until Adjust Zoom is displayed on the screen. 4. Press and hold the left or right arrow buttons on the projector's remote control or use the thumbstick on the control panel to resize the image. 5. Press the Esc button on the projector's control panel or remote control when finished.
2. Press the Lens button on the projector's control panel or remote control. 3. Press the Lens button repeatedly until Adjust Focus is displayed on the screen. 4. Press and hold the left or right arrow buttons on the projector's remote control or use the thumbstick on the control panel to focus the image. 5. Press the Esc button on the projector's control panel or remote control when finished.
4. Select the Panel Alignment setting and press Enter. 5. Select the Panel Alignment setting and press Enter. 6. Select On and press Enter. 7. Select the Select Color setting and choose one of the following: • R to adjust the red color convergence. • B to adjust the blue color convergence. Note: You can only adjust the red or blue color convergence. Green is the standard color panel and cannot be adjusted. 8. Select the Pattern Color setting and press Enter. 9.
You see this screen: 11. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box. 12. Press the Enter button to move to the next corner of the screen. 13. When you are finished adjusting each corner of the screen, press Enter.
14. Do one of the following: • If your projector's panel alignment is now correct, select Exit and press Enter to return to the Panel Alignment menu. • If your projector needs additional panel alignment, select Select intersection and adjust and press Enter. Use the arrow keys on the remote control to highlight the corner of any box on the screen that is misaligned and press Enter to adjust the color convergence. Repeat this step as necessary.
1 32 feet (10 m) 2 ± 30° 3 60° Horizontal 1 32 feet (10 m) 2 ± 30° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other. 1. Make sure the connected image source you want to use is turned on. 2. For video image sources, insert a DVD or other video media and press its play button, if necessary. 3. Do one of the following: • Press the Source button on the projector until you see the image from the source you want.
PowerLite Pro Cinema LS9600e 1 HDMI port sources 2 WirelessHD source 3 PC port (VGA) source 4 Composite video source 5 Component video source PowerLite Pro Cinema LS10000 1 HDMI port sources 2 PC port (VGA) source 3 Composite video source 4 Component video source 68
Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen. • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount. • Rear flips the image horizontally to project from behind a translucent screen.
4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Related references Projector Feature Settings - Settings Menu Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio.
PowerLite Pro Cinema LS10000 A list of the available aspect ratios appears. 3. To cycle through the available aspect ratios for your input signal, press the up or down arrow button. 4. Press Enter to select the aspect ratio. Parent topic: Image Aspect Ratio Related references Input Signal Settings - Signal Menu Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source.
Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images using the full projection area and maintains the aspect ratio of the image. Zoom Displays images using the full width of the projection area and maintains the aspect ratio of the image. Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. You can also select two modes that can be used with a third-party anamorphic lens.
Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the play button, if necessary. 3. Press the Color Mode button on the remote control to change the Color Mode. A list of available Color Modes appears. 4.
Color Mode Description Living Room Best for projecting in a room with closed curtains Natural Best for projecting in a dark room. Perform color adjustment in this mode. THX Uses a color mode authorized by THX Ltd.
3. Select the Image menu and press Enter. 4. Select the Lens Iris setting and press and hold the left or right arrow buttons on the projector's remote control to adjust the lens iris. Note: Reducing the value increases the intensity of the colors in the image. The default values and settings differ based on the Color Mode settings and the zoom lens position. 5. Press Menu or Esc to exit the menus.
2. Press the Super Res button on the remote control. Note: You can also set the Super-resolution setting from the Signal menu. A list of the setting values appears. Higher values increase the intensity of the effect. 3. Press the left or right arrow buttons on the projector's remote control to adjust the setting. 4. Press Menu or Esc to exit the menus.
2. Press the Sup Res/4K button on the remote control. Note: You can also select the Super-resolution/4K setting in the Signal menu. A list of the available settings appears. 3. Press the up or down arrow buttons on the projector's remote control to select a setting. 4. Press the Sup Res/4K button on the remote control to exit the menu.
PowerLite Pro Cinema LS10000 The second HDMI video source appears as a sub-screen in the corner of the image. Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust the size and position of the sub-screen. 3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at least three seconds. 4. Press the P-in-P button again to close the sub-screen and resume normal projection.
Available Picture in Picture Options You can adjust the following options by pressing the Menu button on the remote control while Picture in Picture mode is active: Setting Description Subscreen Size Adjusts the size of the sub-screen Subscreen Position Adjusts the location where the sub-screen is displayed Subscreen Source Selects which source appears in the sub-screen (PowerLite Pro Cinema LS9600e) Swap Main/Sub Switches the video source displayed on the main screen with the source displayed on t
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture Temporarily Locking the Projector's Buttons Saving Settings to Memory and Using Saved Settings Saving the Lens Position and Using Saved Lens Positions Shutting Off the Picture Temporarily You can temporarily turn off the projected picture if you want to redirect your audience's attention during a presentation.
2. To turn the picture back on, press the Blank button again. Parent topic: Adjusting Projector Features Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. Note: You can use the remote control to control the projector when the control panel buttons are locked. 1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select the Lock Setting setting and press Enter. 4.
You see a confirmation prompt. 5. Select Yes and press Enter. 6. Restart the projector for the lock settings to take effect. Unlocking the Projector's Buttons Parent topic: Adjusting Projector Features Related references Projector Feature Settings - Settings Menu Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them.
You see this screen: 5. Select one of the following options: • Load Memory: Overwrites your current settings with saved settings • Save Memory: Saves your current settings to memory (10 memories with different names are available) Note: A memory name that has already been used is indicated by a green mark. Saving over a previously saved memory overwrites the settings with your current settings. • Erase Memory: Erases the selected memory settings • Rename Memory: Renames a saved memory 6. Press Esc to exit.
1. Turn on the projector and display an image. 2. Adjust the focus, zoom, and lens shift settings. 3. Press the Menu button. Note: You can also press the Memory button on the remote control to access the Memory menu directly. 4. Select the Memory menu and press Enter. You see this screen: 5.
• Erase Lens Position: Erases the selected memory settings • Rename Lens Position: Renames a saved memory (12 characters maximum) 6. Press Esc to exit.
Using WirelessHD You can use the included WirelessHD transmitter to wirelessly stream HD content from a video device to the projector(PowerLite Pro Cinema LS9600e). WirelessHD Transmission Range WirelessHD Remote Control Operation Connecting the WirelessHD Transmitter Viewing WirelessHD Content Switching WirelessHD Sources Using the WirelessHD Picture in Picture Feature WirelessHD Transmission Range The WirelessHD Transmitter must be placed within the distance and angles shown here.
Vertical (inverted on ceiling) 1 16 feet (5 m) 2 32 feet (10 m) 3 45° 4 50° Horizontal (when WiHD Mode is set to Full) 87
1 16 feet (5 m) 2 32 feet (10 m) 3 70° 4 50° Horizontal (when WiHD Mode is set to Dynamic) 1 16 feet (5 m) 2 32 feet (10 m) 3 85° 4 60° When positioning the WirelessHD transmitter, note the following: • The wireless transmission range varies depending on the placement and material of the furniture and walls. The values provided here are for your reference only. • The projector cannot communicate through walls.
• The antennas are built into the front of the projector and the transmitter. Make sure the antennas face each other when setting up the devices. • When checking the signal, place the projector and WirelessHD Transmitter close to each other and make sure there are no other projectors operating nearby. • Depending on the signal strength, the image's color information may be automatically discarded to avoid any interruptions and maintain a constant connection.
Horizontal 1 13 feet (4 m) 2 32 feet (10 m) 3 ± 40° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries. Parent topic: Using WirelessHD Connecting the WirelessHD Transmitter You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD transmitter.
1. Plug the AC adapter into the AC input port on the WirelessHD transmitter and into an electrical outlet. 2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the WirelessHD transmitter. Note: You can connect an MHL-compatible smartphone or tablet to the HDMI 5 / MHL (IN) port on the WirelessHD Transmitter.
3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect an HDMI cable to the display device and to the HDMI (OUT) port on the back of the transmitter. Parent topic: Using WirelessHD Viewing WirelessHD Content You can project content wirelessly from any device connected to the WirelessHD transmitter. 1. Turn on the video equipment or computer you connected to the transmitter and want to project from. 2.
Switching WirelessHD Sources If you have connected multiple HDMI input sources to your WirelessHD transmitter, you can use the projector remote control to switch between sources. 1. Aim the remote control at the WirelessHD transmitter. 2. Press the Input button on the remote control or the WirelessHD transmitter. You see this screen: 3. Press the Input button repeatedly to highlight different input sources. 4. When you have highlighted the source you want to switch to, release the Input button.
Using the WirelessHD Picture in Picture Feature If you have connected multiple video sources to the WirelessHD transmitter, you can use the transmitter's Picture in Picture (P-in-P) feature to wirelessly project images from two separate sources at the same time. This feature is independent of any Picture-in-Picture capabilities of your projector. 1. Make sure that the WirelessHD source is selected. 2.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings.
You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4. Press the up or down arrow button to move through the settings. 5. Change the settings using the buttons listed on the bottom of the menu screens. 6.
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Brightness Varying levels available Lightens or darkens the overall image Contrast Varying levels available Adjusts the difference between light and dark areas of the image Color Saturation Varying levels available Adjusts the intensity of the image colors. Tint Varying levels available Adjusts the balance of green to magenta tones in the image.
Setting Options Description Advanced Gamma Selects various detailed color settings RGB RGBCMY EPSON Super White Color Gamut Gamma: adjusts the gamma levels of the image. Select Customized to adjust the gamma while viewing the image or a graph.
Setting Options Description Dynamic Contrast Off Adjusts the luminance of the image to improve contrast by tracking changes in image brightness Normal High Speed Lens Iris Varying levels available Adjusts the contrast of the image by controlling the amount of light entering the lens Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode, use the Power Consumption setting.
To change settings for an input source, make sure the source is connected and select that source. Setting Options Description 3D Setup 3D Display Selects various 3D options for 3D image sources 2D-to-3D Conversion 3D Format 3D Depth 3D Display: enables 3D mode 2D-to-3D Conversion: converts 2D images to 3D Diagonal Screen Size Inverse 3D Glasses 3D Viewing Notice Note: When using 2D-to-3D Conversion, set 3D Format to Auto or 2D.
Setting Options Description Sync. Varying levels available Adjusts signal to eliminate fuzziness or flickering in computer images; for best results, adjust the Tracking setting before adjusting the Sync setting to improve the accuracy of the adjustments.
Setting Options Super-resolution/4K (PowerLite Off Pro Cinema LS10000) 1 to 5 Description Sharpens blurred images resulting from increasing resolution 4K-1 to 4K-5 Super-resolution (1 to 5); reduces blurring when the image resolution is increased to 1920 × 1080 4K Enhancement (4K-1 to 4K-5); projects 4K images (3840 × 2160), employing superresolution processing to create ultra-high-definition video images Cannot be set when a 4K or computer image is selected Detail Enhancement Range Strength Enhance
Setting Options Description Advanced Noise Reduction Noise Reduction: reduces flickering in analog images in three levels Setup Level Overscan HDMI Video Range Image Processing Setup Level: adjusts the level at which dark areas of the image are rendered black; leave this setting at 0% for most video equipment; check your video equipment specifications to verify the correct setting Overscan: changes the projected image ratio to make the edges visible by a selectable percentage or automatically HDMI Vi
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features.
Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options that allow the projector remote to control HDMI-connected devices that support the CEC standard HDMI Link Power On Link Power Off Link Device Connections: lists the devices connected to the HDMI1 and HDMI2 ports HDMI Link: enables or disables the HDMI Link function Power On Link: controls what happens when you turn on the projector or a linked device • PJ -> Device or Bidirectional: turns on the linked device when
Setting Options Description WirelessHD Device Connections (PowerLite Pro Cinema LS9600e) WirelessHD Device Connections: displays a list of available WirelessHD devices Reception WiHD Mode WirelessHD: controls whether the projector receives WirelessHD signals Reception: displays the strength of the WirelessHD signal WiHD Mode: adjusts the WirelessHD signal strength and range • Full: uses the maximum video bandwidth at all times • Dynamic: provides extended signal range while adjusting the video band
Setting Options Description User Button 2D-to-3D Conversion (PowerLite Pro Cinema LS10000) 3D Depth Assigns a menu option to the User button on the remote control for one-touch access Inverse 3D Glasses Power Consumption Detail Enhancement Info Picture in Picture See the list of available Picture in Adjusts the size and location of Picture options the sub-screen, swaps sources and exits Picture in Picture mode 108
Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Direct Power On: lets you turn on the projector without pressing the power button Illumination Trigger Out High Altitude Mode Lens Adjustment Mode Sleep Mode: automatically places the projector in standby mode after an interval of inactivity Illumination: turns off the lights on the projector Trigger Out: outputs a DC 12V signal from the 3.
Setting Options Description Display Menu Position Selects various display options Menu Color Menu Position: adjusts the location where the menu is displayed Messages Display Background Startup Screen Standby Confirmation Menu Color: selects the color of the menu Messages: controls whether messages are displayed on the screen Display Background: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts u
Setting Options Description Panel Alignment Panel Alignment Corrects color misalignment in the projected image Select Color Pattern Color Start Adjustments Panel Alignment: enables adjustments for color convergence (the alignment of the red and blue colors in the projected image) Select Color: specifies the color convergence to correct Pattern Color: specifies the color pattern used during panel alignment Start Adjustments: starts the Panel Alignment feature Language Various languages available Se
Projector Memory Options - Memory Menu Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs.
Setting Description Rename Lens Position Renames a saved lens position entry Parent topic: Adjusting the Menu Settings Related tasks Saving Settings to Memory and Using Saved Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Note: Available settings depend on the current input source.
Information item Description Scan Mode Displays the scan mode Refresh Rate Displays the refresh rate of the current input source 3D Format Displays the 3D format of the signal (Frame Packing, Side-by-Side, or Top and Bottom) Sync Info Displays information that may be needed by a service technician Deep Color Displays Deep Color bit depth information Video Signal Displays the video signal format of the current input source Status Displays information about projector problems that may be needed
You cannot reset the following settings using the Reset All option: • Input Signal - Component • Panel Alignment • Language • Memory settings • Saved lens position settings • Operation Hours Parent topic: Adjusting the Menu Settings 115
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
Cleaning the 3D Glasses To remove dust, dirt, smudges, or fingerprints from the glasses, use a lint-free cloth. Note: Unplug any charging cables from the glasses before cleaning them. Caution: Do not use paper towels or any other abrasive materials to clean the glasses. Parent topic: Projector Maintenance Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord. • To remove dust or dirt, use a soft, dry, lint-free cloth.
If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or laser. Damage due to the failure to properly maintain the projector or its filter may not be covered by the projector's Limited Warranty.
3. Press and hold the tab on the air filter cover, and pull to open the cover.
4. Pull the air filter out of the projector. 5. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use canned air; the gases may leave a residue, or push dust and debris into the projector's optics or other sensitive areas.
6. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 7. Place the air filter back in the projector as shown.
8. Close the air filter cover and press until it clicks into place. 9. Replace the cable cover if necessary. Parent topic: Air Filter and Vent Maintenance Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table. 1.
3. Press and hold the tab on the air filter cover, and pull to open the cover.
4. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 5. Place the new air filter in the projector as shown.
6. Close the air filter cover and press until it clicks into place. 7. Replace the cable cover, if necessary. Parent topic: Air Filter and Vent Maintenance Related references Optional Equipment and Replacement Parts Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
1. Remove the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Transporting the Projector The projector contains precision parts, some of which are glass.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Solving Image Problems Solving Projector or Remote Control Operation Problems Solving Network Problems Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
1 Temp light 2 Laser light 3 Status light 4 Power light Power light Status light Laser light Temp light Status and solution Blue Blue Off Normal operation or standby (with Communication On) Off 129
Power light Status light Laser light Temp light Status and solution Blue Flashing blue Off Warming up; wait for an image to appear Off or Shutting down; when the Status light stops flashing, you can unplug the projector Off Off Off Off Standby or sleep mode Blue Off Off Off Standby (with Communication On) or WirelessHD standby (PowerLite Pro Cinema LS9600e) Flashing blue Varies Varies Flashing orange Projector is too hot • Make sure that the vents and air filter are not clogged with d
Power light Status light Laser light Temp light Status and solution Off Flashing blue Orange Laser has a problem or failed to turn on Off • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Off Flashing blue Off Flashing orange A fan or sensor has a problem; turn the projector off, unplug it, and contact Epson for help Off Flashing blue Flashing orange Flashing
Solving Image Problems Check the solutions in these sections if you have any problems with projected images.
• For images projected from applications using Windows DirectX, turn off DirectX functions. Parent topic: Solving Image Problems Related references Input Signal Settings - Signal Menu Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source button on the projector repeatedly to cycle through the available sources. Wait a few seconds for an image to appear.
Parent topic: Solutions When "No Signal" Message Appears Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) 1. Open the System Preferences utility and select Displays. 2. Click the Arrangement tab. 3. Select the Mirror Displays checkbox.
Related tasks Changing the Image Aspect Ratio Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • Adjust the image shape using the Keystone menu setting.
Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Check the lens for condensation. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen, and directly in front of it. • If you are projecting from a computer, use a lower resolution.
Projector Feature Settings - Settings Menu Related tasks Changing the Color Mode Solutions to Panel Alignment Problems If the panel alignment does not result in a satisfactory picture, try the following solutions: • Make sure the Projection setting matches the installation position. • Make sure the projection surface is not colored or textured. Project on a white surface with no texture. • Leave the projector on for a while before making adjustments to the panel alignment.
• Make sure your 3D glasses are paired with the projector. • Adjust the 3D Depth setting on the Signal menu. • Make sure you are within the 3D viewing range. • Avoid using the projector near wireless networks, microwave ovens, 2.4 GHz cordless phones, or other devices that use the 2.4 GHz frequency band. These devices can interfere with the signal between the projector and the 3D glasses. • If the other solutions do not not solve the problem, change the Inverse 3D Glasses setting on the Signal menu.
Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating the projector or remote control.
• Make sure you are operating the remote control within the reception angle and range of the projector. • Make sure the projector is not warming up or shutting down. • Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up. • Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers.
Related tasks Setting Up Projector Network E-Mail Alerts Solutions When You Cannot Access the Projector Through the Web If you are unable to access the projector through a web browser, make sure you are using the correct ID and password, which are case sensitive. • For the user ID, enter EPSONWEB. (You cannot change the user ID.) • For the password, enter the password set in the projector's Network menu. The default password is admin. • Make sure you have access to the network the projector is on.
• Proof of purchase (such as a store receipt) and date of purchase • Computer or video configuration • Description of the problem Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales). To purchase a replacement remote control, call (562) 276-4394 (U.S.
Technical Specifications These sections list the technical specifications of your projector.
PowerLite Pro Cinema LS10000: High Power Consumption mode: White light output 1500 lumens (ISO 21118 standard) Color light output 1500 lumens Note: Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output measured in accordance with ISO 21118.
Projector Light Source Specifications Type Laser Diode PowerLite Pro Cinema LS9600e: Output: 33.7 mW Repetition rate: 0 to 100% PowerLite Pro Cinema LS10000: Output: 41.
Weight PowerLite Pro Cinema LS9600e: 37.5 lb (17 kg) PowerLite Pro Cinema LS10000: 39.7 lb (18 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 100 to 240 VAC ±10% PowerLite Pro Cinema LS9600e: 3.5 to 1.6 A PowerLite Pro Cinema LS10000: 4.6 to 2.
Power consumption Operating: (220 to 240 V) PowerLite Pro Cinema LS9600e: Normal Power Consumption mode: 334 W ECO Power Consumption mode: 215 W PowerLite Pro Cinema LS10000: Normal Power Consumption mode: 442 W ECO Power Consumption mode: 262 W Standby: 0.38 W (Communication Off), 3.
Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 (cTUVus Mark) Parent topic: Technical Specifications Supported Video Display Formats For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 576 SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 50/60 1920 × 1080 VGA 60 640 × 480 SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 4K × 2K (PowerLite Pro Cinema LS10000) 24/25/
Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p)* 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p)* 24/30 1920 × 1080 MHL input signals via WirelessHD Transmitter (HDMI5 port only) SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p)* 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p)* 24/50/60 1920 × 1080 * With WirelessHD, these signals do not support
Display format Refresh rate (in Hz) Resolution (in pixels) 3D formats HDTV (720p) 50/60 1280 × 720 Side by Side Top and Bottom HDTV (1080i) 50/60 1920 × 1080 Side by Side HDTV (1080p) 50/60 1920 × 1080 — 24 1920 × 1080 Side by Side Top and Bottom Parent topic: Technical Specifications 151
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Laser Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal.
Laser Safety Information This projector is a Class 2 laser product that complies with the IEC60825-1 international standard for lasers. Follow these safety instructions when using the projector. • If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to dissassemble or modify the projector.
Laser Optical Path When using the Lens Shift function, the laser light from the projection lens is diffused within the following range: When Lens Shift is at the maximum vertical position: 32° from the center of the lens When Lens Shift is at the maximum horizontal position: 34° from the center of the lens Parent topic: Laser Safety Information Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on.
• If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using mounting hardware designed for use with this projector. • When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants. This may cause the projector case to crack and the projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage the projector.
• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. • Never open any covers on the projector except as specifically explained in this manual. Never attempt to disassemble or modify the projector. Refer all repairs to qualified service personnel.
• Do not block the lens during projection using a book or any other object. This could damage the projector or cause a fire. • Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances. WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
• Consult the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Parent topic: Notices Open Source Software License GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs").
EPSON original drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (c) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5.
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
This projector product includes the open source software programs which apply the GNU Lesser General Public License Version 2 or later version ("LGPL Programs"). We provide the source code of the LGPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the LGPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.
of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License.
provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.
consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change.
This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License". The "BSD License" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of BSD License programs busybox-1.13.
List of libjpeg programs libjpeg-6b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg" are as follows. Copyright (c) 1994-1997, Thomas G. Lane. This file is part of the Independent JPEG Group's software. For conditions of distribution and use, see the accompanying README file. This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software".
List of libpng programs libpng-1.2.49 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows. This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence.
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg" (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp@users.sourceforge.
jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
4. Redistribution.
8. Limitation of Liability.
The "newlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of newlib programs newlib 1.17.0 License terms of conditions of each program which are provided by owner of the copyright to the "newlib" are as follows. The newlib subdirectory is a collection of software from several sources. Each file may have its own copyright/license that is embedded in the source file.
DISCLAIMED.
This software is the property of Advanced Micro Devices, Inc (AMD) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by AMD. AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS SOFTWARE.
Hewlett-Packard Company not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Hewlett-Packard Company makes no representations about the suitability of this software for any purpose. (9) Hans-Peter Nilsson Copyright (C) 2001 Hans-Peter Nilsson Permission to use, copy, modify, and distribute this software is freely granted, provided that the above copyright notice, this notice and the following disclaimer are preserved with no changes.
This software is the property of SuperH, Inc (SuperH) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by SuperH. SUPERH MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE. IN NO EVENT SHALL SUPERH BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS SOFTWARE.
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (14) Alexey Zelkin Copyright (c) 2000, 2001 Alexey Zelkin All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (16) FreeBSD Copyright (c) 1997-2002 FreeBSD Project. All rights reserved.
(18) Citrus Project Copyright (c)1999 Citrus Project, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (20) DJ Delorie (i386) Copyright (C) 1991 DJ Delorie All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
(28) Artem Bityuckiy (--enable-newlib-iconv) Copyright (c) 2003, Artem B. Bityuckiy, SoftMine Corporation. Rights transferred to Franklin Electronic Publishers. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (31) - M. Warner Losh (targets using libc/posix) Copyright (c) 1998, M. Warner Losh All rights reserved.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the company may not be used to endorse or promote products derived from this software without specific prior written permission.
/* * Copyright (c) 2009 MIPS Technologies, Inc. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
jquery.ui.touch-punch.js License terms of conditions of each program which are provided by owner of the copyright to the "MIT License" are as follows. Copyright (c) 2012 jQuery Foundation and other contributors, http://jquery.
Graduate School of Information Science, Nagoya Univ., JAPAN. The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or the conditions described in Version 2 of the GNU Public License officially announced by the Free Software Foundation, consents to the use, reproduction, alteration, and redistribution (hereafter called utilization) of this software (this software includes alterations, likewise below) without compensation.
License terms of conditions of each program which are provided by owner of the copyright to the "TINET" are as follows. (1) FreeBSD Copyright (c) 1980, 1986, 1993 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
(1) When this software is utilized in the form of source code, the above copyright declaration, these conditions of utilization, and the following stipulation of no guarantee shall be included in unchanged form inside the source code. (2) When this software is redistributed in a form in which it can be used in the development of other software, library form, etc.
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.