EPSON AcuLaser CX11 Series Basic Operation Guide Table of Contents Product Parts Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Inside the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EPSON AcuLaser CX11 Series Basic Operation Guide Product Parts Front view Rear view b a l b k j c d e f i a c d h g g h e f a. Auto Document Feeder (fax model only) b. stopper (fax model only) c. a. cover F b. USB interface connector c. output tray telephone interface connector (fax model only) LINE: Connects with the phone cord. EXT: Connects with an attached phone. d. extension tray d. network interface connector e. control panel f. cover A e. AC inlet g. MP tray f.
EPSON AcuLaser CX11 Series Basic Operation Guide Inside the product Scanner parts a a b b c c d f e a. document cover b. document table a. fuser unit c. transportation lock b. photoconductor unit access lever c. photoconductor unit d. cleaning knob access lever e. toner cartridge f.
EPSON AcuLaser CX11 Series Basic Operation Guide Control panel a p b c o n m d e f g l h i j k a. One Touch Dial Use these buttons to transmit a fax to a registered fax number assigned button to the corresponding button. A, B, C (fax model only) b. Data light (Yellow) Flashes when the product is processing data. c. Error light (Red) On or flashes when an error has occurred. - On when an error has occurred that requires operator intervention.
EPSON AcuLaser CX11 Series Basic Operation Guide e. l Left/ r Right button Use these buttons to sequentially display previous or next setting values. The r Right button is also used as the OK button to set and register a setting item. u Up/ d Down button Use these buttons to sequentially display previous or next menu items. f. Advanced/Menu button Use this button to display the advanced menu for each mode. g.
EPSON AcuLaser CX11 Series Basic Operation Guide Basic Copying Setting your originals 1. Make sure the product is turned on, and then open the document cover gently. You can load the original either on the document table or in the Auto Document Feeder (fax model only) depending on the type of the original. Note: ❏ Before scanning a document, remember to respect the rights of copyright owners. Do not scan published text or images without first checking their copyright status.
EPSON AcuLaser CX11 Series Basic Operation Guide Note: The area with a width of 1.5 mm from both horizontal and vertical rulers cannot be scanned. 1. Maximum unreadable area of 1.5 mm 2. Maximum unreadable area of 1.5 mm Follow the steps below to load documents in the Auto Document Feeder. 1. Slide the edge guides all the way outward. 2 1 3. Close the document cover gently so that the original does not move. Note: ❏ Always keep the document table clean.
EPSON AcuLaser CX11 Series Basic Operation Guide Note: ❏ Make sure the ADF cover is closed firmly. If the ADF cover is open, the document table is preemptively scanned and a blank copy is output even if an original is set on the Auto Document Feeder. ❏ If you load multiple pages in the Auto Document Feeder, the pages will be fed from the top and then ejected face-down. Follow the steps below to make a copy. 1. Make sure the product is turned on and paper is loaded in the product.
EPSON AcuLaser CX11 Series Basic Operation Guide Note: ❏ Do not turn off the power or press another mode’s button while copying is in progress, as copying may be performed incorrectly. ❏ When you place multiple documents in the Auto Document Feeder and make a continuous high quality (600 dpi) color copy with the default memory (128 MB), the product may not work properly because of insufficient memory. We recommend adding an memory module so that the total memory size is 256 MB or higher.
EPSON AcuLaser CX11 Series Basic Operation Guide Basic Faxing (Fax Model Only) Sending faxes Basics of sending faxes 1. Make sure that the product is turned on. 2. Press the panel. Fax button on the control The Fax light is lit and the LCD panel shows Fax Mode for a few seconds, then changes to the fax mode’s screen. 4. Enter the recipient’s fax number directly from the numeric keypad on the control panel. Note: ❏ A maximum of 50 characters can be entered for a recipient.
EPSON AcuLaser CX11 Series Basic Operation Guide 6. Press the x B&W Start or x Color Start button to start the transmission. To send a black-and-white fax, press the x B&W Start button. To send a color fax, press the x Color Start button. Note: When the recipient’s fax machine supports only black-and-white fax, a color fax is received as a black-and-white fax even if you press the x Color Start button.
EPSON AcuLaser CX11 Series Basic Operation Guide Sending faxes using one-touch function Sending faxes using group-dial function When a frequently used recipient fax number is registered to the One Touch Dial button (A, B, or C), you can send a fax to the registered recipient by simply pressing the corresponding One Touch Dial button. When multiple recipient fax numbers are registered in a group, the same original is sent to all the registered recipients by choosing the desired group number.
EPSON AcuLaser CX11 Series Basic Operation Guide Note: To display the details of the registered group, press the Advanced/Menu button while a group is selected. To return to the group list again, press either the Advanced/Menu button or the l Left button. 5. Make the appropriate settings for your scanning purpose if necessary. Note: When you press the x B&W Start button without making any settings here, the fax transmission starts with the existing setting values. 6.
EPSON AcuLaser CX11 Series Basic Operation Guide 2. Press the d Down button twice to select Fax Settings, then press the r Right button. 2. Press the x B&W Start or x Color Start button after confirming the sender’s transmission is a fax. 3. Press the d Down button twice to select Reception Settings, then press the r Right button. The received data are printed by page as they are received. 4. Press the d Down button to select Incoming Mode, then press the r Right button.
EPSON AcuLaser CX11 Series Basic Operation Guide Troubleshooting Clearing jammed paper If paper becomes jammed in the product, the Print light (green) goes off and Error light (red) is lit. The product’s LCD panel and EPSON Status Monitor 3 provide alert messages. Clear the paper jam by following the order of the indicated cover names displayed on the control panel or EPSON Status Monitor 3.
EPSON AcuLaser CX11 Series Basic Operation Guide c Caution: Do not touch the lever under the scanner unit when you open or close the unit. Touching it will cause the document cover of the scanner unit to fall down, which may damage the product and cause injury. 3. Raise the two green levers of the fuser unit to unlock it. 2. Open cover C. 4. Hold the guide up by holding the green tab, and gently pull out any sheets of paper. Be careful not to tear the jammed paper.
EPSON AcuLaser CX11 Series Basic Operation Guide 5. Push down the two green levers of the fuser unit. 7. Lower the scanner unit to the original position. 6. Close cover C.
EPSON AcuLaser CX11 Series Basic Operation Guide Jam E (cover E) 3. Close cover E. Follow the steps below to clear paper jams at cover E. 1. Open cover E. 2. Gently pull out any sheets of paper with both hands. Be careful not to tear the jammed paper.
EPSON AcuLaser CX11 Series Basic Operation Guide Jam F (cover F) Follow the steps below to clear paper jams at cover F. 2. Open cover C, then raise the two green levers on the fuser unit to unlock it. 1. Raise the scanner unit. 3. Open cover E, and then cover F. c Caution: Do not touch the lever under the scanner unit when you open or close the unit. Touching it will cause the document cover of the scanner unit to fall down, which may damage the product and cause injury.
EPSON AcuLaser CX11 Series Basic Operation Guide 4. Gently pull out any sheets of paper with both hands. Be careful not to tear the jammed paper. 6. Push down the two green levers on the fuser unit, then close cover C. 5. Close cover F, and then cover E. 7. Lower the scanner unit to the original position.
EPSON AcuLaser CX11 Series Basic Operation Guide Jam MP (MP tray) Follow the steps below to clear paper jams at the MP tray. 3. Reload the paper and close the MP tray cover. 1. Open the MP tray cover and remove all paper that is loaded. 4. Open and close cover A. 2. Gently pull out any sheets of paper that have fed part way into the product. Note: After removing the jammed paper from the MP tray, you need to open and close any cover except the MP tray cover to clear the error message.
EPSON AcuLaser CX11 Series Basic Operation Guide Jam LC/G (Optional paper cassette and cover G) 3. Reinsert the paper cassette. Follow the steps below to clear paper jams at the optional paper cassette and cover G. 1. Pull out the paper cassette from the optional paper cassette unit. If the jammed paper is not visible inside the optional paper cassette or to check if there is any jammed paper inside cover G, proceed to step 4. 4. Open cover G. 2.
EPSON AcuLaser CX11 Series Basic Operation Guide 5. Gently pull out any sheets of paper with both hands. Be careful not to tear the jammed paper. When transparencies are jammed at the MP tray When transparencies are jammed, follow the steps below to clear the jam. 1. Open the MP tray cover and remove all transparencies that are loaded. 6. Close cover G. 2. Open cover E. Then, gently pull out any transparencies with both hands. Be careful not to tear the jammed transparency.
EPSON AcuLaser CX11 Series Basic Operation Guide 3. Reload the transparencies into the MP tray. 4. Open and close cover A. Paper jams in the Auto Document Feeder 1. Open the Auto Document Feeder’s cover. 2. Gently pull out any sheets of paper with both hands. Be careful not to tear the jammed paper. If you cannot pull out the jammed paper, proceed to the next step.
EPSON AcuLaser CX11 Series Basic Operation Guide 3. Gently pull out any sheets of paper by rolling the knob as illustrated below. 4. Close the Auto Document Feeder’s cover.