User's Manual

Using the PriorityFax

Fax Number Redialing

If the fax number you dial is busy, you need not reenter the

number you dialed. There are two types of redialing—automatic

and manual.

Automatic Redialing

If you use automatic sending, the fax machine automatically enters

the Automatic Redial mode when the number is busy. In the

Automatic Redial mode, the fax machine redials the number you

just tried every five minutes until it reaches the other fax machine

or until it has tried the number six times. If there is no answer, the

machine hangs up after 15 rings and waits for the next scheduled

try. When the other number answers, your document is sent

automatically.

Note

You can change the number of minutes before your

machine automatically redials and the number of times

the number is tried by changing the automatic redial

settings. See Chapter 4 for instructions.

Manual Redialing

When you are using manual sending and you receive a busy

signal, you can dial the same number again using REDIAL. When

you receive the busy signal, follow these steps:

When you want to redial the same number, press SPKR or lift the

handset.

Press SPKR or hang up the handset.

When you hear the dial tone, press REDIAL. The fax machine

automatically redials the number. (The redial feature redials the

last number dialed. If you tried a different number between the

busy signal and the redial attempt, REDIAL calls the second

number.)

When you hear the fax tone, press START promptly. The fax

machine begins sending your document.

2-11