EPSON Stylus ® C82 Printer Basics
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers.
Contents WELCOME! About Your Software About Your Documentation Using the EPSON Printer Information Center Launching the Movies Launching the Manual PRINTING FROM START TO FINISH Loading Paper Loading Envelopes Printing with Windows Selecting the Settings You Use Most Often Customizing Windows Print Settings Printing on a Macintosh Printing with OS 8.6 to 9.
Replacing an Ink Cartridge Checking Your Ink Supply Purchasing Cartridges Ink Cartridge Precautions Replacing an Empty or Low Ink Cartridge Replacing a Cartridge When Print Quality Declines Aligning the Print Head Cleaning the Printer Transporting the Printer 27 28 28 29 29 32 34 36 37 PROBLEM SOLVING 39 40 41 41 42 43 43 44 45 48 48 50 50 50 50 51 51 Printer Parts Diagnosing Printer Problems Checking the Control Panel Lights Running a Printer Check Problems and Solutions Setup and Software Installation
INSTALLING SOFTWARE FOR WINDOWS 2000, 95, NT 4.X, AND MACINTOSH OS X Installing Printer Software for Windows 2000 Installing Printer Software for Windows 95 and NT 4.x Installing Printer Software for Macintosh OS X REQUIREMENTS AND NOTICES 53 53 56 57 Windows System Requirements Macintosh System Requirements ENERGY STAR Compliance Important Safety Instructions Ink Cartridge Safety Instructions FCC Compliance Statement Declaration of Conformity Epson America, Inc.
Welcome! The EPSON Stylus® C82 printer is the ideal desktop printer for business and home use. With its exceptional speed and print resolutions, it is practical for everyday use, yet capable of delivering when you need superior printing. It provides you with these advanced features: ■ EPSON’s exclusive DuraBrite™ inks. These quick-drying inks are resistant to water and fading, so prints stand the test of time.
About Your Software The CD-ROM that came with your printer includes all the software you need for printing. See the Start Here sheet for installation instructions. ■ Your printer driver runs your printer and lets you control how your documents look. You can’t print without it. Tip: It’s a good idea to check EPSON’s support web site periodically for free updates to your printer driver. Visit http://support.epson.com. Download instructions are posted for your convenience.
About Your Documentation To set up your printer, see the Start Here sheet. You’ll also find information on the Start Here sheet for installing the printer software for Windows® XP, Windows Me, and Windows 98, and Macintosh® OS 8.6 to 9.x.
Using the EPSON Printer Information Center Need help loading special paper, replacing ink cartridges, or cleaning the print head? Use the EPSON Printer Information Center (EPIC) to view printer movies that quickly tell you how. EPIC also includes an on-screen Reference Guide with additional printer details. If you haven’t installed the EPSON Printer Information Center, follow the instructions on the Start Here sheet or beginning on page 53 of this manual.
Launching the Manual 1. Double-click the EPSON Printer Information Center icon on your desktop. 2. Click Reference Guide. You see this screen: Click here to expand the table of contents 3. Click a topic on the left to expand the table of contents. 4. Click on the topic you want to view. ■ Click right arrows ■ Click down arrows to view subtopics, then click on a topic. to close a subtopic list.
6 Welcome!
Printing from Start to Finish Here’s what to do to print a basic document—such as a photograph or newsletter— from loading the paper to selecting print settings to controlling the print job. Follow the instructions in these sections: ■ “Loading Paper” below ■ “Printing with Windows” on page 10 ■ “Printing on a Macintosh” on page 15 ■ “Selecting the Correct Paper Type” on page 23 Loading Paper You can load up to 150 sheets of plain paper in your printer’s sheet feeder. 1.
Follow these guidelines when loading paper: ■ Don’t load paper above the arrow on the left edge guide. ■ Load the printable side face up. It’s usually whiter or brighter than the other side. ■ Always load the short edge first, even when printing in landscape mode. ■ Load letterhead or preprinted paper into the printer top edge first. ■ If you experience paper feeding problems, try loading fewer sheets.
2. Move the thickness lever on the side of the printer to the ^ position. (Remember to move the thickness lever back to the m position when you’re done.) 3. Before you print, make these settings: ■ For Orientation, select Landscape (for OS X, select the middle icon in the Orientation section of the page setup dialog box). ■ For paper Type (Windows) or Media Type (Macintosh), select Plain Paper. ■ Choose the correct envelope size as the paper Size (Windows) or Paper Size (Macintosh).
Printing with Windows This section describes the basic steps for printing with Windows. Make sure you have paper in the printer, as described on page 7. After you create your document in a software program, follow these steps to print: 1. From the File menu, click Print. You see your application’s Print dialog box (your dialog box may look different): Select your printer here Click here to open your printer software 2. Make sure your EPSON Stylus C82 printer is selected. 3.
You see the Main menu of your printer settings dialog box. 1 Choose your document type 2 Choose your paper type . . . 3 and paper size 4 Click here 4. Select the type of document you’re printing: ■ Draft: For rough drafts on plain paper. Saves ink. ■ Text: For text-only documents, like letters or reports. Delivers high-quality text printing. ■ Text & Image: For documents that have both text and images, like newsletters.
6. You can also make these settings: ■ PhotoEnhance: Improves the appearance of low-resolution and improperly exposed photos. ■ Reverse Order: Prints your document so that the pages are in the right order when you retrieve them from the paper tray. ■ Print Preview: Lets you see what your printout will look like before you print. Tip: For more information about printer settings, click the or Help button. 7. If you’re done, click OK to return to the Print dialog box and print, or . . .
During printing, this window appears and shows the progress of your print job. You can use the buttons to cancel, pause, or restart printing. You can also see how much ink you have left. Click to cancel printing Click to pause or resume printing Shows ink levels Note: You can also press the printer’s ) button to cancel a print job in progress. Selecting the Settings You Use Most Often Your printer settings apply only to the application you’re currently using.
Customizing Windows Print Settings You can use advanced settings for color matching, printing at a higher resolution, or selecting a variety of special effects. 1. On the Main tab, click the Advanced button in the bottom right corner of the window. The Basic settings change to the Advanced settings. 2.
Printing on a Macintosh After you create your document in a software program, follow the steps in one of these sections to print: ■ For Macintosh OS 8.6 to 9.x applications, see the next section. ■ For Macintosh OS X applications, see page 18. Printing with OS 8.6 to 9.x Before you begin, make sure you selected your printer in the Chooser as described on the Start Here sheet. 1. From the File menu, select Page Setup.
■ Printable Area: Lets you center the text or image on the page, or increase the printable area of the page. Note: Print quality may decline at the edges of the printout when Maximum is selected. Before printing a large document, print a single page to test print quality. 4. Click OK to close the Page Setup window. 5. From the File menu, select Print. You see this dialog box: Select the type of paper you loaded Select the ink color Select Automatic mode Select higher quality or faster printing 6.
7. You can also do the following: ■ Click to reduce/enlarge your printed image, print multi-page layouts, or add a watermark. ■ Click ■ Click ■ Click to control background printing and schedule print jobs. , then click Preview to preview your printout. to check your ink levels. 8. Click Print. If you turned on background printing, the window below appears. You can use this window to pause, cancel, or restart your print job, stop the print queue, and prioritize your print jobs.
Printing with OS X If you’re using an OS X compatible printing application, follow the steps below to print a document. (If you’re using an application that’s compatible only with Macintosh Classic mode, follow the steps on page 15 instead.) Before you begin, make sure you added your printer to Print Center as described on page 58. 1. From the File menu, select Page Setup. Select C82 Series(USB) here 2. Select C82 Series(USB) in the Format for menu. 3.
5. Select Print Settings from the pull-down menu. You see the window: Select the type of paper you loaded (see page 23) Select the ink color Select Automatic mode Select Quality or Speed (for faster printing) Click here to preview your printout Tip: For more information about printer settings, click Help. The OS X printer driver contains a subset of the settings available with the OS 8.6 to 9.x Macintosh printer driver described in this book. 6.
7.
Customizing Macintosh Print Settings You can use custom and advanced settings for color matching, printing at a higher resolution, or selecting a variety of special effects. 1. On the printer settings window, click Custom. Click Custom, then click the Custom Settings list Macintosh OS 8.6 to 9.x Click Custom, then click the Custom Settings list Macintosh OS X 2.
3. To access advanced settings, click Custom, then click Advanced (OS 8.6 to 9.x) or click Advanced Settings (OS X). Select color management settings here Click here to select print quality; includes Photo RPM, which gives the best results on photo and glossy paper types Select various printing options here Macintosh OS 8.6 to 9.
4. OS 8.6 to 9.x: Click OK to save your settings, then click Print. OS X: Click Print. Selecting the Correct Paper Type Your printer automatically adjusts itself for the type of paper you select in your printer software. That’s why the paper Type setting (Media Type setting for Macintosh) is so important. It tells your printer what kind of paper you’re using and adjusts the ink coverage accordingly. Here are the settings you should choose for your paper: For this paper . . .
24 Printing from Start to Finish
Maintaining Your Printer This section describes maintenance procedures to keep your printer working at its best and preparation steps for moving your printer.
Running the Head Cleaning Utility 1. Make sure the printer is turned on but not printing, and the H ink out light is off. (If the H ink out light is flashing or on, you may need to replace an ink cartridge; see page 27.) 2. Windows: Right-click the printer icon on your taskbar (in the lower right corner of your screen). Select Head Cleaning. Macintosh OS 8.6 to 9.x: Open your application’s File menu and choose Page Head Cleaning Utility button, then click the button. Setup or Print.
Examining the Nozzle Check Pattern Examine the nozzle check pattern you print. It should look something like this: Each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. If your printout looks okay, you’re done. If there are gaps in the lines, clean the print head again; see page 25 for instructions. Replacing an Ink Cartridge When the red H ink out light is flashing, one of your ink cartridges is low on ink.
Checking Your Ink Supply To check your ink supply, do one of the following: ■ Windows: Double-click the printer icon on your taskbar (in the lower right corner of your screen). You see a window like the one on the right showing ink levels: You can also double-click the Ink Monitor icon on the taskbar. The window that appears lets you check ink levels and also order cartridges online. Just click the Buy Now button to launch your web browser. ■ Macintosh: OS 8.6 to 9.x: Choose File > Print.
When you need new ink cartridges, contact your dealer or call the EPSON Store SM at (800) 873-7766, or visit the EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral. Ink Cartridge Precautions Warning: Keep ink cartridges out of the reach of children and do not drink the ink. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water.
3. Press the H ink button for one second. The print head moves to the left, and the cartridge that needs to be replaced stops under the _ mark. The P power light also begins to flash. Caution: Don’t press the H ink button for more than 2 seconds, or the printer will start to clean the print head. Ink button To avoid damaging the printer, never move the print head by hand. 4. Press the H ink button again. 30 ■ If more than one ink cartridge is empty, the next cartridge moves under the _ mark.
5. Pinch the front and back tabs of the empty cartridge as you lift it out of the printer. Don’t take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. 6. Before you remove the new cartridge from its package, shake it four or five times. 7. Remove the cartridge from its package and lower it into the cartridge holder. Push down gently until the cartridge is firmly seated.
Replacing a Cartridge When Print Quality Declines Even if the H ink out light isn’t flashing or on, you may need to replace an ink cartridge if it’s been installed in your printer for more than six months and print quality declines. Follow these steps to replace old ink cartridges: 1. Print a nozzle check pattern to determine which cartridges need to be replaced: Windows: Right-click the click Nozzle Check. printer icon on the Windows taskbar, and then Macintosh 8.6 to 9.
6. Pinch the front and back tabs of the cartridge as you lift it out of the printer. Don’t take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. 7. Before you remove the new cartridge from its package, shake it four or five times. 8. Remove the cartridge from its package and lower it into the cartridge holder. Push down gently until the new cartridge is firmly seated. 9.
Aligning the Print Head If your printouts contain misaligned vertical lines, or you see white or black horizontal banding, you may need to align the print head. Note: Your printer must be connected directly to your computer (not over a network) to use the Print Head Alignment utility. 1. Turn on the printer. Then load plain, letter-size paper. 2. Windows: Right-click the printer icon on your taskbar (in the lower right corner of your screen) and select Print Head Alignment. Macintosh OS 8.6 to 9.
6. Look at the four rows of patterns in your printout. For each row, select the pattern with the two vertical lines most precisely printed on top of each other and enter its number in the corresponding box on the screen. If you find a perfectly aligned pattern for each row, click Next. If you find a row that doesn’t have a perfectly aligned pattern, select the best pattern and click Realignment. Then repeat this step. 7. Click Print to print a black horizontal alignment sheet. You see this screen: 8.
Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. 1. Turn off the printer and wait for the green Ppower light to go out. 2. Unplug the power cord. 3. Disconnect the printer cable from the printer. 4. Remove all the paper from the sheet feeder. 5. Clean the exterior of the printer with a soft, damp cloth. Keep the printer cover closed to prevent water from getting inside. 6. If ink leaks inside the printer, carefully wipe it off with a damp cloth.
Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. Follow these steps: Caution: To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 5 after installing the printer in its new location. 1. Turn on the printer and wait until the print head locks in the far right position. Then press the P power button to turn the printer off. 2.
38 Maintaining Your Printer
Problem Solving See “Diagnosing Printer Problems” on page 41 to help determine what the cause of your printer problem may be. Then see these sections for solutions.
Printer Parts Paper support Right edge guide Left edge guide Printer cover Output tray Output tray extensions Ink cartridge holder (not removable) Paper thickness lever Paper / Cancel Print Job button and paper out light Ink button and ink out light Power button and light 40 Problem Solving
Diagnosing Printer Problems You can diagnose some problems by checking the printer’s control panel lights, as described in this section, or running a printer check, as described on page 42. Checking the Control Panel Lights Follow the guidelines below when you check the control panel lights: P is on or flashing The Ppower light is on when the printer is ready to print. It flashes when the printer is receiving a print job, charging ink, or cleaning the print head.
P is off The printer is not receiving power. Try these solutions: ■ Make sure the printer is turned on. ■ Turn off the printer, plug in the power cord securely, and turn the printer on again. ■ Make sure the outlet is working and is not controlled by a switch or timer. If in doubt, try another outlet. Running a Printer Check You can run a printer check to determine whether a problem comes from the printer itself or some other source. Follow these steps: 1.
Problems and Solutions Here are some troubleshooting tips if you have any problems setting up your printer, installing software, or printing. Setup and Software Installation Problems You’re having problems installing the printer software. ■ Make sure your printer is turned on and the printer cable is securely connected at both ends. Then carefully follow the installation instructions for your system. (You’ll find them on the Start Here sheet or beginning on page 53.
■ For Windows 2000 or XP, don’t select Block under Control Panel> ■ Run a printer check as described on page 42. If the check page prints, make sure your printer software is installed correctly. ■ If you’re printing on a network, you need to set up your printer for network printing, as described in your on-screen Reference Guide. System> Hardware> Driver Signing; select Ignore or Warn instead.
■ Close open applications that you’re not using. ■ Increase your system’s memory (RAM). For the fastest printing, try these tips: ■ ■ Select Draft as the Quality Type (Windows) or set the Quality/Speed slider to Speed (Macintosh). In the Advanced dialog box, turn Super MicroWeave® off (Macintosh only) and turn High Speed on. ■ If your printer is connected to a USB hub, disconnect any unused USB devices. ■ If you’re using the parallel port, enable ECP/DMA mode.
Your printout is blurry or smeared. 46 ■ Make sure your paper isn’t damp or curled, or loaded face down (the printable side should be face up). Reload new paper face up. ■ Use a support sheet with special paper, or try loading your paper one sheet at a time. ■ Load a new sheet of plain paper and press the ) paper button to eject it. Do this several times. If you still have a problem, ink may have leaked inside the printer.
■ Make sure your paper isn’t damaged, old, dirty, or loaded face down. If it is, load new paper face up. For best results, use genuine EPSON paper. ■ The colors produced by DuraBrite inks may look slightly different than those produced by ordinary dye-based ink. ■ Due to the nature of pigment inks, lighting conditions can affect the appearance of printer output. For example, a print viewed in daylight may appear to have a slightly different color balance when viewed under tungsten lighting.
Some parts of your print are not as glossy as others. Because of the nature of pigment inks, the degree of gloss may be uneven on glossy photo papers. Surface gloss decreases with greater pigment saturation. Paper Problems Paper doesn’t eject fully or is wrinkled. ■ ■ If the paper doesn’t eject fully, you may have set the wrong paper size. Press the ) paper button to eject the paper, then select the correct paper size in your application or printer software.
The margins are incorrect. ■ ■ ■ Make sure the paper settings are correct for your paper size. See page 11 (Windows), page 15 (Macintosh OS 8.6 to 9.x), or page 18 (Macintosh OS X). Choose the correct margins for your paper size. The margins must be within the printable area of the page. See “Printer Specifications” in your on-screen Reference Guide. Make sure your paper is positioned next to the right side of the feeder and the left edge guide is snug against the other side.
Uninstalling and Reinstalling Printer Software You may need to uninstall and then reinstall your printer driver and utilities if, for example, you upgrade your Windows operating system. You don’t need to uninstall your other photo software or the EPSON Printer Information Center. Windows 1. Click Start, and select Programs or All Programs. 2. Point to Epson or EPSON Printers, then select EPSON Printer Software Uninstall. 3. In the next window, make sure EPSON Stylus C82 Series is selected and click OK.
3. Select C82 Series(USB) in the printer list and click the Delete button. 4. Restart your Macintosh, then see page 57 for instructions on reinstalling your software. Where To Get Help If you need help with your printer, see the contact information below. For help using any other software with your printer, see your software’s documentation for technical support information.
Before you call, please have the following information ready: ■ Product name (EPSON Stylus C82) ■ Product serial number (located on the back of the printer) ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer configuration ■ Description of the problem You can purchase ink cartridges, paper, manuals, and accessories from EPSON at (800) 873-7766, or visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.
Installing Software for Windows 2000, 95, NT 4.x, and Macintosh OS X Follow the instructions in this section for: ■ “Installing Printer Software for Windows 2000” below ■ “Installing Printer Software for Windows 95 and NT 4.x” on page 56 ■ “Installing Printer Software for Macintosh OS X” on page 57 Installing Printer Software for Windows 2000 Before you begin, complete the instructions for setting up your printer on the Start Here sheet. 1. Turn on your computer. (Make sure your printer is still on.
3. After a moment, click Next. You see a screen indicating that Windows has found an unknown device. 4. Click Next. 5. Click Next again on the following screen. Wait while the files are copied to your computer. 6. Click Finish when you see this screen: 54 Installing Software for Windows 2000, 95, NT 4.
7. Read the license agreement and click Agree to continue with the installation. You see this screen: 8. Make sure you’ve loaded letter-size paper in your printer, then click Print a Test Page to check that your printer is set up correctly. 9. Optionally, click Install EPSON Software Film Factory and follow the on-screen instructions to install the software. 10.
Installing Printer Software for Windows 95 and NT 4.x Before you begin, complete the instructions on the Start Here sheet for setting up your printer. Note: Use a parallel cable to connect the printer to your computer. Windows 95 and NT 4.x do not support a USB connection. 1. Turn on your computer. (Make sure your printer is still on.) 2. Put the EPSON CD-ROM in your drive. Caution: If you see the Add New Hardware Wizard, click Cancel. You can’t install your software that way. 3.
7. Click Install Manual and Printer Movies and follow the on-screen directions to place a shortcut to the EPSON Printer Information Center on your desktop. 8. Click Exit. When you see the your printer as instructed. EPSON Product Registration screen, register 9. Restart your computer. You’re ready to start printing! See the instructions beginning on page 10. Installing Printer Software for Macintosh OS X Before you begin, complete the instructions on the Start Here sheet for setting up your printer. 1.
4. Read the license agreement and click Continue, then click Agree. 5. Select the OS X drive where you want to install your printer software, then click Continue. 6. Click Install on the Easy Install screen and follow the on-screen instructions to install the printer software and restart your Macintosh. 7. Open the Applications folder, then open the Utilities folder. Double-click Print Center. 8. If you see a message that you have no printers available, click Add. 9.
Requirements and Notices This chapter includes system requirements, safety instructions, legal notices, and other important information. Windows System Requirements To use your printer and its software, your system should have: ■ A Microsoft Windows compatible PC with a Pentium®-equivalent processor, 233 MHz or faster, recommended ■ Windows XP, Windows Me, Windows 2000, Windows 98, Windows 95, or Windows NT® 4.
Macintosh System Requirements To use your printer and its software, your system should have: ■ An Apple® iMac™ series or Power Macintosh® G3 or G4 with built-in USB port ■ Mac® OS 8.6 through 9.x; OS X 10.1 or later (Mac OS 9.1 or better recommended) ■ For Mac OS 8.6 through 9.
ENERGY STAR Compliance As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The EPA ENERGY STAR office equipment program is a voluntary partnership with the computer and office equipment industry to promote the introduction of energy-efficient personal computers, monitors, printers, fax machines, and copiers in an effort to reduce air pollution caused by power generation.
■ Do not block or cover the openings in the printer’s case or insert objects through the slots. ■ Except as specifically explained in this manual, do not attempt to service the printer yourself.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: EPSON AMERICA, INC. Located at: MS: 3-13 3840 Kilroy Airport Way Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Epson America, Inc. Limited Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the first retail purchaser that the EPSON printer covered by this limited warranty statement, if purchased and used in the United States or Canada, conforms to the manufacturer’s specifications and will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENT OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
Index A Accessories, 29, 52 Advanced settings, 14, 22 to 23 Aligning print head, 34 to 35 Archival Matte Paper, 23 Automatic mode, Macintosh, 16, 19 B Background printing, 17 Banding, 45 Basic printing Macintosh, 15 to 20 Windows, 10 to 13 Best Photo setting, 11 Blank pages, 48 Blurry images, 46 Browser, 4 Buttons, 25 C Cable, printer, 59 to 60 Cancel Print Job button, 13, 17, 20, 40 Cancelling printing, 13, 17, 20, 40 Characters, incorrect, 49 Checking printer, 42 Cleaning print head, 25 to 26 printer, 3
G M Gamma setting, 14, 22 Macintosh background printing, 17 basic printing, 15 to 20 customizing settings, 21 to 23 installing OS X software, 57 to 58 layout settings, 17, 20 previewing printout, 17, 19 scheduling print jobs, 17, 20 system requirements, 60 uninstalling software, 50 to 51 USB, 60 Maintaining printer, 25 to 36 Margins, incorrect, 49 Matte Paper Heavyweight, 23 Media Type setting, 23 Mac OS 8.6 to 9.
Paper feeding problems, 48 orientation, 11, 15, 18 thickness lever, 40, 45, 46 Type setting, 11, 23 Paper out light, 41 Paper Size setting, 11, 15, 18 Photo Quality Ink Jet Paper, 23 Photo RPM setting, 14, 22 Photo setting, 11 PhotoCenter, EPSON, 2 PhotoEnhance setting, 12, 16, 22 Premium Bright White Paper, 23 Previewing printout, 12, 17, 19 Print Center, 20 Print dialog box, 10 Print head aligning, 34 to 35 cleaning, 25 to 26 Print Head Alignment utility, 34 to 35 Print quality problems, 45 to 47 Print Sh
T W Technical support, 51 to 52 Text & Image setting, 11 Text setting, 11 Text/Graph setting, 21 Thickness lever, 45, 46 Transparencies, 23 Transporting printer, 37 Troubleshooting, 39 to 48 Warranty, 65 Windows customizing settings, 14 default settings, 13 installing software, 53 to 57 layout settings, 12 paper Type, 11, 23 previewing printout, 12 printer status, 13 printing with, 10 to 14 system requirements, 59 USB, 59 World Wide Web, 51 U Uninstalling software, 50 to 51 USB, 59, 60 Utilities Head Cl
EPSON Ink Jet Papers Use EPSON paper and inks to get the best results from your EPSON printer! EPSON papers are specially designed to work with EPSON quick drying inks. Premium Bright White Paper Premium Bright White Paper has a sleek, ultra-smooth surface, and 108+ brightness. This paper delivers crisp black text and vivid, colorful images. It’s perfect for everyday printing—especially two-sided documents.
How To Order EPSON Ink and Paper To order EPSON ink cartridges and paper, call (800) 873-7766 or visit the EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, call (800) 463-7766 for dealer referral. EPSON Ink Cartridges Black T032120 Cyan T042220 Magenta T042320 Yellow T042420 EPSON Papers Paper name Size Part number EPSON Premium Bright White Paper Letter (8.5 x 11 inches) S041586 EPSON Photo Quality Ink Jet Paper Letter (8.5 x 11 inches) S041062 Legal (8.