Quick Start Manual

ManualsBrandsEpson ManualsPrintersEpson Epson Stylus NX200

Epson Stylus

NX200 Series

Start Here

6 Close the cartridge cover. Press down until it clicks.

7 Lower the scanner.

8 Press the Stop button to charge the ink. Charging takes about

/2 minutes.

Caution: Don’t turn off the NX200 Series while it is charging or you’ll

waste ink.

3 Flip the feeder guide forward. Then squeeze the edge guide and

slide it left.

4 Load paper against the right edge and underneath the tab, with the

printable side face up.

8½ 11

4 6

Note: Don’t load the paper sideways; always load it short edge first.

5 Slide the edge guide over.

Install cartridges

Note: Do not load paper yet.

1 Lift up the scanner, then open the cartridge cover.

2 Shake the ink cartridges, then unpack them.

3 Remove only the yellow tape from each cartridge.

Caution: Do not remove any other seals or the cartridge may leak.

4 Insert the cartridges in the holder for each color.

5 Press each cartridge down until it clicks.

Turn on the NX200 Series

1 Connect the power cable.

Note: Do not connect to the computer at this time.

2 Press the On button.

Load paper

1 Open the paper support and pull up the extensions.

2 Open the output tray, pull out the extensions, and raise the stopper.

Unpack

If anything is missing, contact Epson as described on the back.

Caution: Do not open the ink cartridge package until you are ready to install

the ink. Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove the control panel sticker(s)

from the backing sheet and place over the corresponding text on the

control panel.

(Included for Canada only)

Summary of content (8 pages)

PAGE 1
Start Here Epson Stylus NX200 Series 1 Unpack ® 3 Install cartridges 6 Close the cartridge cover. Press down until it clicks. 7 Lower the scanner. 3 Flip the feeder guide forward. Then squeeze the edge guide and slide it left. 4 Load paper against the right edge and underneath the tab, with the printable side face up. Note: Do not load paper yet. 1 2 Lift up the scanner, then open the cartridge cover. Shake the ink cartridges, then unpack them.
PAGE 2
Start Here Epson Stylus NX200 Series 1 Unpack ® 3 Install cartridges 6 Close the cartridge cover. Press down until it clicks. 7 Lower the scanner. 3 Flip the feeder guide forward. Then squeeze the edge guide and slide it left. 4 Load paper against the right edge and underneath the tab, with the printable side face up. Note: Do not load paper yet. 1 2 Lift up the scanner, then open the cartridge cover. Shake the ink cartridges, then unpack them.
PAGE 3
Start Here Epson Stylus NX200 Series 1 Unpack ® 3 Install cartridges 6 Close the cartridge cover. Press down until it clicks. 7 Lower the scanner. 3 Flip the feeder guide forward. Then squeeze the edge guide and slide it left. 4 Load paper against the right edge and underneath the tab, with the printable side face up. Note: Do not load paper yet. 1 2 Lift up the scanner, then open the cartridge cover. Shake the ink cartridges, then unpack them.
PAGE 4
Start Here Epson Stylus NX200 Series 1 Unpack ® 3 Install cartridges 6 Close the cartridge cover. Press down until it clicks. 7 Lower the scanner. 3 Flip the feeder guide forward. Then squeeze the edge guide and slide it left. 4 Load paper against the right edge and underneath the tab, with the printable side face up. Note: Do not load paper yet. 1 2 Lift up the scanner, then open the cartridge cover. Shake the ink cartridges, then unpack them.
PAGE 5
Install software Your software works with Windows 2000, XP, XP Professional x64 Edition, Windows Vista , and Mac OS X 10.3.9, 10.4.x, and 10.5.x. Macintosh® 1 M ake sure the NX200 Series is NOT Want great results? Simple. Use genuine Epson paper and ink. For the right supplies at the right time, you can purchase them at Epson Supplies CentralSM at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller.
PAGE 6
5 Install software Your software works with Windows 2000, XP, XP Professional x64 Edition, Windows Vista , and Mac OS X 10.3.9, 10.4.x, and 10.5.x. Macintosh® 1 M ake sure the NX200 Series is NOT Want great results? Simple. Use genuine Epson paper and ink. For the right supplies at the right time, you can purchase them at Epson Supplies CentralSM at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller.
PAGE 7
5 Install software Your software works with Windows 2000, XP, XP Professional x64 Edition, Windows Vista , and Mac OS X 10.3.9, 10.4.x, and 10.5.x. Macintosh® 1 M ake sure the NX200 Series is NOT Want great results? Simple. Use genuine Epson paper and ink. For the right supplies at the right time, you can purchase them at Epson Supplies CentralSM at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller.
PAGE 8
5 Install software Your software works with Windows 2000, XP, XP Professional x64 Edition, Windows Vista , and Mac OS X 10.3.9, 10.4.x, and 10.5.x. Macintosh® 1 M ake sure the NX200 Series is NOT Want great results? Simple. Use genuine Epson paper and ink. For the right supplies at the right time, you can purchase them at Epson Supplies CentralSM at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller.