Printer Basics
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other equipment.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PRINT Image Matching and Exif Print . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About PRINT Image Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About Exif Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing on CDs and DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting a CD or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Designing CDs and DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing Your Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Print Position . . . . . . . . . . . . . . . . . .
Uninstalling Printer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Macintosh OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Macintosh OS 8.6 to 9x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Where To Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 71 72 72 73 Requirements and Notices .
Contents
Welcome Your EPSON Stylus® Photo R200 is a full-featured photo and CD/DVD printer. You get outstanding printouts from these advanced features: ■ EPSON’s exclusive 6-color ink technology lets you achieve fine shadow detail, dazzling highlights, and excellent fill across a wide range of colors. Genuine EPSON® ink and papers create long-lasting and water-resistant prints. ■ CD and DVD printing on ink jet-printable CDs and DVDs.
With PRINT Image Matching, the digital camera manufacturer can set specific printing options for each camera model. These options include: ■ contrast, sharpness, and brightness ■ gamma level, color space, color saturation, and noise reduction ■ shadow point, highlight point, and color balance The camera saves this information in each JPEG or TIFF image file. Your printer—along with EPSON SoftwareTM Film FactoryTM or the P.I.M.
About Your Software Your printer CD-ROM includes all the software you need for printing. See the Start Here sheet for installation instructions. ■ Your printer driver runs your printer and lets you control how your documents look. You can’t print without it. Tip: It’s a good idea to check EPSON’s support website periodically for free updates to your printer driver. Visit http://support.epson.com. Download instructions are posted for your convenience.
About Your Documentation To set up your printer and install its software, see the Start Here sheet. This book contains instructions on loading paper, printing with Windows® and Macintosh,® printing borderless photos, printing on CDs and DVDs, maintaining your printer, and solving basic problems. For more information about your printer, double-click the SP R200 Reference Guide icon on your desktop. Please follow these guidelines throughout: Warnings must be followed carefully to avoid bodily injury.
Printing From Start to Finish Before you start, make sure your printer is set up and its software is installed as described on the Start Here sheet. Whenever you print, make sure you do the following: ■ Use the right paper. For the best-looking photos, most vivid colors, and greatest detail, always use genuine EPSON papers and EPSON inks. ■ Choose the right printer settings. Your printer automatically adjusts itself for each type of paper. That’s why printer settings are important.
Follow these guidelines when loading paper: ■ Load the printable side face-up. It’s often brighter or whiter. ■ Load letterhead or preprinted paper into the printer top edge first. ■ Always load the short edge first, even when printing in landscape mode. ■ Don’t load paper above the arrow on the left edge guide. ■ If you’re using special paper, follow the instructions that came with it. Loading Envelopes 1. Open the output tray and its extension. 2.
For instructions on selecting these settings, see: ■ “Printing in Windows” on page 14 ■ “Printing With Macintosh OS X” on page 17 ■ “Printing with Macintosh OS 8.6 to 9.
Printing in Windows 1. From the File menu, click Print. Select your printer here Click here to open your printer software 2. Make sure EPSON Stylus Photo R200 Series is selected. 3. Click the Properties or Preferences button. (If you see a Setup, Printer, or Options button, click it. Then click Properties or Preferences on the next screen.
Select the following in the properties window: Select the type of document you’re printing Select your paper Type Select your paper Size Select your document or image orientation 4.
During printing, this window appears and shows the progress of your print job. You can use these buttons to cancel, pause, or resume printing. You can also see how much ink you have left. Click to cancel printing Click to pause or resume printing Selecting Default Settings Your printer settings only apply to the program that you’re currently using. If you want, you can change the Windows default printer settings for all your programs. 1.
Printing With Macintosh OS X If you’re using a Mac OS X-compatible printing application, follow the steps below to print a document. (If you’re using an application that’s compatible only with Macintosh Classic mode, follow the steps on page 20 instead.) Before you begin, make sure you added your printer to the Print Center as described on the Start Here sheet. 1. From the File menu, select Page Setup.
7. Select Print Settings from the pull down menu. 8. Select the following Print Settings as necessary: Select the type of paper you’re using Select Color or Black ink Select higher quality or faster printing (if available) Click Print Note: For more information about printer settings, click the Help button. The Quality setting on this screen gives you the best combination of quality and print speed for most prints.
■ Extension Setting: To select a wider platen gap if ink smears on sheets or envelopes. ■ Save Custom Settings: To save your selections for future use. (In OS X 10.2.x, select Save As from the Presets pull-down menu.) 10. Click Print. 11. To monitor the progress of your print job, click the Print Center icon when it appears in the dock on the bottom of your desktop. In OS X 10.2.x, double-click Stylus Photo R200 in the Printer List window. You see a screen like this one: 12.
Printing with Macintosh OS 8.6 to 9.x Before you begin, make sure you selected your printer in the Chooser as described on the Start Here sheet. 1. From the File menu, select Page Setup. Select the following settings: Make sure you see SP R200 Series Select your paper size Select your document or image orientation 2. Click OK to close the Page Setup window. 3. From the File menu, select Print. 4.
5. You can also do the following: ■ Click to reduce/enlarge your printed image, print multi-page layouts, or add a watermark. ■ Click to control background printing and schedule print jobs. ■ Click , then click Preview to preview your printout. ■ Click to check your ink levels. 6. Click Print. 7. If you turned on background printing, you can select EPSON Monitor IV from the Application menu in the upper right corner of your screen.
Selecting the Correct Paper Type Select the correct paper Type or Media Type setting so your printer knows what kind of paper you’re using and adjusts the ink coverage accordingly.
Customizing Print Settings You can use advanced settings for color matching, printing at a higher resolution, or selecting a variety of special effects and layouts. Customizing Windows Print Settings 1. On the Main tab, click the Advanced button in the bottom right corner of the window. 2. If you see a warning note, click Continue. 3.
4. Once you’ve finished selecting advanced settings, you can: ■ Click OK to save your settings, return to the Print dialog box, and print. ■ Click the Basic button to return to the Basic settings. ■ Click the Page Layout tab and continue with step 5 to select page layout options. 5.
Customizing Macintosh Print Settings Macintosh OS X 1. Click Advanced on the printer settings window. 2. Select these advanced settings as necessary: Click here to select Photo RPM for the best print quality on certain paper types Select various print options here To select color management settings, select Color Management from the pull-down menu Note: For the highest print quality, select Photo RPM. Please note that printing will take longer in this mode.
Macintosh OS 8.6 to 9.x 1. On the printer settings window, click Custom under Mode, then click Advanced. 2. Select these advanced settings as necessary: Click here to select Photo RPM for the best print quality on certain paper types Select various print options here Select color management settings here Note: For the highest print quality, select Photo RPM. Please note that printing will take longer in this mode.
Printing Borderless Photos You can print your photos with no margins, extending the image all the way to the edges of the page. Although borderless printing is a bit slower, you get beautiful snapshots and enlargements, without trimming, on these papers and sizes: Paper name Sizes Paper Type or Media Type setting EPSON Matte Paper Heavyweight 8 × 10 Matte Paper - Heavyweight EPSON Photo Paper Letter (8.
Windows 1. Start your photo program and open your photo. 2. From the File menu, select Print. Then click Properties or Preferences. You see the following window: 3. Select Photo or Best Photo as the Quality Option setting. 4. Select one of the following as the paper Type setting: ■ Matte Paper - Heavyweight ■ Photo Paper ■ Glossy Photo Paper ■ Premium Glossy Photo Paper ■ Premium Luster Photo Paper ■ Premium Semigloss Photo Paper 5. Click the Borderless checkbox. Read the message and click OK.
7. Select your photo orientation. 8. Click OK. 9. Click OK or Print. Macintosh OS X 1. Start your photo program and open your photo. 2. From the File menu, select Page Setup. You see the following window: Select Stylus Photo R200 (Sheet Feeder - Borderless) 3. Select Stylus Photo R200(Sheet Feeder - Borderless) in the Format for drop-down list. 4. Select your Paper Size.
7. From the File menu, select Print. Select Stylus Photo R200 (Sheet Feeder - Borderless) 8. Select Stylus Photo R200(Sheet Feeder - Borderless) in the Printer drop-down list. Note: Always select the same Printer setting as you chose in step 2. 9. Select Print Settings from the list. 10.
Macintosh OS 8.6 to 9.x 1. Start your photo program and open your photo. 2. From the File menu, select Page Setup. You see the following: 3. Select your Paper Size. 4. Click the Borderless checkbox. Note: If you need to adjust the amount of image expansion necessary for borderless printing, click the Expansion button and move the Expansion slider. 5. Select your document or image orientation. 6. Click OK. 7. From the File menu, select Print.
8. Select one of the following as the Media Type setting: ■ Matte Paper - Heavyweight ■ Photo Paper ■ Glossy Photo Paper ■ Premium Glossy Photo Paper ■ Premium Luster Photo Paper ■ Premium Semigloss Photo Paper 9. Select Quality using the slider. 10. Click Print. Printing on CDs and DVDs Your printer includes a special tray that lets you print customized text, graphics, and photos directly on any ink jet-printable CD or DVD.
Cleaning the Rollers Before you print on CDs or DVDs, it’s a good idea to clean the rollers inside your printer. You can do this by feeding and ejecting several sheets of plain paper. 1. Make sure your printer is turned on and several sheets of letter-size paper are loaded. 2. Press the ) button to feed a sheet of paper into the printer. 3. Press the ) button again to eject the paper. 4. Repeat steps 2 and 3 several times.
3. Place the CD or DVD on the CD/DVD tray with the white or printable side face-up. Make sure the disc lays flat in the tray. To print on a small CD (8-cm), place the small CD ring on the tray first, then place the CD inside the ring. Caution: Make sure you always use the small CD ring when printing on 8-cm CDs and that the CD and ring lay flat on the tray, otherwise the printer may be damaged. Always use this piece with 8 cm CDs 4. Insert the tray carefully, making sure it’s level, not tilted up or down.
Designing CDs and DVDs You can use EPSON Print CD to create and print a disc design with images, graphics, and text. 1. Start EPSON Print CD. Windows: Click Start > Programs or All Programs > EPSON Print CD > EPSON Print CD. Macintosh OS X: Open the Applications folder, then open the EPSON Print CD folder and select EPSON Print CD. Macintosh OS 8.6 to 9.x: Open the EPSON Print CD folder on your hard drive and select EPSON Print CD. 2.
4. To modify the template or enhance your background, click the or background icon, if necessary. You can adjust the brightness, contrast, and gamma, or apply mosaic, blur, or special color effects, as follows: ■ Windows: Click the Image Adjustment button, then click the Image Adjustment tab. When you’re finished making adjustments, click OK. ■ Macintosh: Use any of the available editing features. Then click OK.
5. To add text, do one of the following: ■ Windows: Click the text button. Enter your text and use the tabs to apply formatting and special effects, and click OK. (To open the window again, double-click any block of text.) ■ Macintosh: Click the text button. In the Text Settings window, type your text, then use any of the options in the window to format it. You can also use options in the Color Settings and Object Settings windows. Windows Macintosh 6.
Printing Your Design After you have created your design and loaded a CD or DVD, you’re ready to print. Follow the steps for your operating system below. Windows 1. Open the File menu and select Printer Settings. 2. Make sure these settings are selected: ■ Stylus Photo R200 as the Name ■ Manual as the source ■ A4 as the Paper Size ■ CD/DVD as the Media Type 3. Click OK. 4. Open the File menu and select Print. 5. Click OK. The printer prints your CD and ejects it on the tray.
Macintosh OS X 1. Open the File menu and select Page Setup. 2. Make sure Stylus Photo R200 is selected as the Format for option and the Paper Size is set to A4. 3. Click OK. 4. Open the File menu and select Print. 5. Select these print settings: ■ Stylus Photo R200 as the Printer ■ Print Settings from the pull-down menu ■ CD/DVD as the Media Type 6. Click Print. The printer prints your CD and ejects it on the tray. Note: After you print, handle the CD or DVD carefully.
Macintosh OS 8.6 to 9.x 1. Open the File menu and select Page Setup. 2. Make sure SP R200 appears at the top of the screen and these settings are selected: ■ A4 as the Paper Size ■ Manual Feed as the Source 3. Click OK. 4. Open the File menu and select Print. 5. Select CD/DVD as the Media Type setting. 6. Click Print. The printer prints your CD and ejects it on the tray. Note: After you print, handle the CD or DVD carefully.
Adjusting the Print Position If your printed images and text are not centered or positioned the way you want, you may need to adjust the printing position. Use the blank cardboard check disk included with your printer, or an extra CD. You can also use these steps to check the position before you print on a CD or DVD. Follow the steps for your operating system below. Windows 1. Place the cardboard check disk (or an extra CD) on the CD tray and insert it into the printer, as described on page 33. 2.
9. Open the File menu and select Adjust Print Position. You see a screen like this: 10. Make sure Enter Values is checked. 11. Enter the Top distance in the Height (Top) box. Enter the Right distance in the Width (Right) box. 12. Click OK to save the measurements. Macintosh OS X 1. Place the cardboard check disk (or an extra CD) on the CD tray and insert it into the printer, as described on page 33. 2. Start EPSON Print CD. 3. Open the File menu and Select Page Setup. 4.
11. Remove the check disk or CD and measure from the edge of the hole to the small cross marks labeled Top and Right. You’ll need a metric ruler with millimeters for accurate measurements. 12. Open the File menu and select Adjust Print Position. You see a screen like this: 13. Make sure Value entry is checked. 14. Select the Top distance as the Top Space setting and the Right distance as the Right Space setting. 15. Click OK to save the measurements. Macintosh OS 8.6 to 9.x 1.
6. Open the File menu and select Print. 7. Select CD/DVD as the Media Type setting. 8. Select Print Position Check Pattern. 9. Click Print, then click OK on the next screen. The confirmation pattern is printed on the check disk or CD and the printer ejects it. 10. Remove the check disk or CD and measure the distance from the edge of the hole to the small cross marks labeled Top and Right. You’ll need a metric ruler with millimeters for accurate measurements. 11.
Adjusting the Print Density If ink smears on your printed CDs or DVDs, you may need to adjust the color saturation or ink density. CDs from different manufacturers may absorb ink differently, so you may need to adjust the density for each type of disc. Follow these instructions to print a color saturation check pattern, and then make adjustments as necessary. Note: You can also use the Brightness and Contrast settings in EPSON Print CD to adjust color saturation.
Macintosh OS X 1. Insert a test CD or DVD for printing, as described on page 33. 2. Start EPSON Print CD. 3. Select Page Setup from the File menu. 4. Make sure Stylus Photo R200 is selected as the Format for option and the Paper Size is set to A4. 5. Click OK. 6. Open the File menu and select Print. 7. Select these print settings: ■ Stylus Photo R200 as the Printer ■ Print Settings from the pull-down menu ■ CD/DVD as the Media Type 8. Select EPSON Print CD from the pull-down menu. 9.
Macintosh OS 8.6 to 9.x 1. Insert a test CD or DVD for printing, as described on page 33. 2. Start EPSON Print CD. 3. Select Page Setup from the File menu. 4. Make sure SP R200 appears at the top of the screen and these settings are selected: ■ A4 for the Paper Size ■ Manual Feed as the Source 5. Click OK. 6. Open the File menu and select Print. 7. Select CD/DVD as the Media Type setting. 8. Click the Print Density Check Pattern button. 9. Click Print. 10.
Printing From Start to Finish
Maintaining Your Printer Follow the instructions in this chapter to keep your printer working at its best and to prepare it for moving, if necessary: ■ “Cleaning the Print Head” below ■ “Replacing an Ink Cartridge” on page 51 ■ “Aligning the Print Head” on page 57 ■ “Cleaning the Printer” on page 59 ■ “Transporting the Printer” on page 60 Cleaning the Print Head If your printouts are unexpectedly light or dots or lines are missing, you may need to clean the print head.
Running the Head Cleaning Utility 1. Make sure the printer is turned on but not printing, and the red H ink light is off. (If the H ink light is flashing or on, you need to replace a cartridge; see page 51 for details.) 2. Do one of the following: ■ Windows: Right-click the icon on your taskbar (in the lower right corner of your screen). Select Head Cleaning. ■ Macintosh OS X: Open the Applications folder and select EPSON Printer Utility.
If the pattern has white lines or gaps (as shown below), click Clean to clean the print head again. If you don’t see any improvement after cleaning three or four times, refer to “Problems and Solutions” on page 64. You can also turn the printer off and wait overnight—this allows any dried ink to soften—and then try cleaning the print head again. Replacing an Ink Cartridge When the red H ink light flashes, one or more ink cartridges are low on ink.
Checking the Ink Supply To check the ink supply, do one of the following: ■ Windows: Double-click the icon on the Windows taskbar. You see a window like this one: ■ Macintosh OS X: Choose Applications > EPSON Printer Utility > SP R200 Series > EPSON StatusMonitor. ■ Macintosh OS 8.6 to 9.x: From the File menu, select Print, then click the ink icon. You see a window like this one: Click a cartridge image to display information about the cartridge.
Purchasing Ink Cartridges Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package: Ink cartridge Part Number Black T048120 Cyan T048220 Magenta T048320 Yellow T048420 Light Cyan T048520 Light Magenta T048620 Caution: To ensure good results, use genuine EPSON ink cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSON’s warranty.
Removing and Installing Ink Cartridges Be sure you have a new ink cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session. 1. Make sure the printer is turned on (the green P power light should be on, but not flashing). Then open the printer cover. 2. Press and release the H ink button. If your ink light is off, go to step 4.
5. Press in the tab on the back of the cartridge and lift the cartridge out of the printer. Dispose of it carefully. Warning: Keep ink cartridges out of the reach of children. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water. 6. Unwrap the new ink cartridge. Caution: Don’t touch the green circuit board or remove any labels.
7. Lower the cartridge into the holder, with the green circuit board facing the front. Then gently push the cartridge down until it clicks into place. 8. If you need to replace another ink cartridge, repeat steps 5 through 7 before continuing with step 9. 9. Close the cartridge cover. 10. Close the printer cover and press the H ink button. The printer begins charging the ink delivery system. The green P power light flashes and the printer makes noise. Charging takes about half a minute.
Aligning the Print Head If your printouts contain misaligned vertical lines, or you see light or dark horizontal banding, you may need to align the print head. 1. Turn on the printer. 2. Load several sheets of plain, letter-size paper. 3. Do one of the following: ■ Windows: Right-click the icon on your taskbar (in the lower right corner of your screen). Select Print Head Alignment. ■ Macintosh OS X: Open the Applications folder and select EPSON Printer Utility.
6. Select one square each for rows 1 to 4, then enter the number of the best square in the corresponding boxes on the screen. Then click Next. If you can’t find a square without visible bands, choose the one that’s best. Then click Realignment to print another test page and repeat this step. 7. After you click Next, follow the instructions on the screen to print the next test page. You see a window like this one: 8. On the test page, select the square without any visible bands.
Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. 1. Turn off the printer, unplug the power cord, and disconnect the USB cable. 2. Remove all the paper, then use a soft brush to clean the sheet feeder. 3. If the outer case or inside of the sheet feeder are dirty, clean it with a soft cloth dampened with mild detergent. Keep the printer cover closed to prevent water from getting inside. 4.
Transporting the Printer If you need to move your printer some distance, you must prepare it for transportation in its original box or one of a similar size. Caution: To avoid damage, always leave the ink cartridges installed when transporting the printer. 1. Open the printer cover and turn on the printer. Wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the power cord and USB cable from the printer.
Solving Problems See “Diagnosing Printer Problems” on page 62 to help determine what the cause of your printer problem may be.
Diagnosing Printer Problems First, check the printer’s lights (see below) or run a printer check (see page 63). Lights Explanation Green P power light flashes The printer is receiving a print job, replacing an ink cartridge, charging ink, or cleaning the print head. Red ) paper light is on If the CD/DVD tray guide is open, close the CD/DVD tray guide, load paper, then press the ) paper button. Your paper ran out or more than one sheet loaded at a time. Load paper and press the ) paper button.
Lights Explanation Red H ink and red ) paper lights flash alternately The CD/DVD tray guide was left open when you turned on the printer or when printing on paper. Close the CD/DVD tray guide. Green P power light is off; red ) paper and red H ink lights flashing Paper may be blocking movement of the print head. Turn off the printer, then open the cover and remove any jammed paper or other foreign objects. Turn the printer back on again.
■ If the test page prints, the problem probably lies in your software settings, USB cable, or computer, or your software may not be installed correctly. ■ If the test page doesn’t print, you may have a problem with your printer. Try the suggestions in “Problems and Solutions” below. If nothing works, contact you dealer or EPSON as described in “Where To Get Help” on page 73. 6. Turn off the printer, reconnect the USB cable, then turn on your printer and computer.
■ If you are using Macintosh OS X and you do not see the printer name or borderless option in the Format for menu on the Page Setup screen, you may need to set up your printer in the Print Center utility. See the Start Here sheet for instructions. ■ For Windows 2000, if you see an error message or your software doesn’t install correctly, you may not have software installation privileges. Contact your System Administrator. ■ Make sure Windows 98, Me, 2000, or XP was preinstalled on your system.
Your printer makes noise when you turn it on or after it has been sitting for awhile. Your printer is performing routine maintenance. Printing is too slow. Make sure your system meets the requirements listed on page 75. If you’re printing a high-resolution image, you need more than the minimum requirements listed. You may also need to: ■ Clear space on your hard drive or run a defragmentation utility. ■ Close open programs that you’re not using. ■ Increase your system’s memory (RAM).
Print Quality Problems You see banding (light lines). ■ The print head nozzles may need cleaning; see page 49 for instructions. ■ Select a higher print quality and turn off High Speed mode. See page 23 (Windows) or page 25 (Macintosh). ■ Make sure the Type or Media Type setting matches the paper you loaded; see page 22 for guidelines. ■ Make sure the printable side of the paper is face up. It’s usually brighter or whiter. ■ The ink cartridges may need replacing.
Your printout is faint or has gaps. ■ The print head nozzles may need cleaning; see page 49 for instructions. ■ The ink cartridges may be old or low on ink. To replace an ink cartridge, see page 51. ■ Make sure the paper Type (Windows) Media Type (Macintosh) setting matches the paper you loaded; see page 22 for guidelines. ■ Make sure your paper isn’t damaged, old, dirty, or loaded face down.
Problems With Paper Feeding Paper doesn’t eject fully or is wrinkled. ■ If the paper doesn’t eject fully, you may have set the wrong paper size. Press the ) paper button to eject the paper, then select the correct paper size. ■ If it’s wrinkled when it ejects, the paper may be damp or too thin. Paper doesn’t feed correctly or jams in the printer. ■ Make sure the paper support extension is pulled up.
Printed CDs or DVDs are dirty. Clean the rollers as described on page 33. The CD/DVD won’t feed into the printer. Make sure you hold the CD/DVD tray level as you load it into the tray guide without tilting it up or down. Don’t push in the tray too far, but line it up with the arrows exactly as described on page page 33. Miscellaneous Printout Problems The image is inverted. Turn off the Mirror Image setting in the Advanced window or the mirror setting in your program.
You see incorrect characters. ■ Make sure the USB cable is securely connected and meets the system requirements on page 75. Then try printing again. ■ Make sure your printer is selected in your software, or is set as the active printer in the Print Center or Macintosh Chooser. ■ If you’re using a USB hub, connect the printer directly to your computer instead. Too many copies are printing. Make sure that the Copies option in your printer software or program is not set for multiple copies.
Macintosh OS X 1. Open your Applications folder, then open the Utilities folder. 2. Double-click the Print Center icon. 3. Select EPSON Stylus Photo R200, then click Delete. 4. Select EPSON Stylus Photo R200(Sheet Feeder - Borderless), then click Delete. 5. Close Print Center. 6. Restart your Macintosh, then see the Start Here sheet to reinstall your software. Macintosh OS 8.6 to 9x 1. Close all applications. 2. Insert the printer software CD-ROM. 3.
Where To Get Help EPSON provides technical assistance 24 hours a day through the electronic support services and automated telephone services listed below: Service Access World Wide Web From the Internet, you can reach EPSON Support at http://support.epson.com. At this site, you can download drivers and other files, look at product documentation, access troubleshooting information, and receive technical advice through e-mail.
Solving Problems
Requirements and Notices Windows System Requirements To use your printer and its software, your system should have: ■ A Microsoft Windows compatible PC with a Pentium® 300 MHz or faster.
Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the printer safely and effectively: ■ Be sure to follow all warnings and instructions marked on the printer. ■ Use only the type of power source indicated on the printer’s label. ■ Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
■ Unplug the printer and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the case damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. Ink Cartridge Safety Instructions ■ Keep ink cartridges out of the reach of children.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/ or CPU Boards and Power Supplies used with Class B Personal Computers: We: EPSON AMERICA, INC. Located at: MS: 3-13 3840 Kilroy Airport Way Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Epson America, Inc. Limited Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser that the EPSON printer covered by this limited warranty statement, if purchased new and used in the United States or Canada, conforms to the manufacturer’s specifications and will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase.
fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-Epson products, or service other than by an Epson Authorized Servicer. If a claimed defect cannot be identified or reproduced, you will be held responsible for the costs incurred.
Requirements and Notices
Index A Accessories, 73 Adobe Photoshop, P.I.M.
EPSON accessories, 73 help, 73 ink, 53 papers, 13, 22, 27 Print CD, 35 to 47 Store, 73 EPSON PhotoCenter, 9 Exif Print, description, 8 F Faint images, 68 Film Factory, 9 Full bleed printing, 27 to 32 G Gamma setting, 18 Glossy Photo Paper, 22 Grainy prints, 68 H Head Cleaning utility, 50 to 51 Help, EPSON, 73 High Speed setting, 66 I ICM (Image Color Management) setting, 23 Incorrect characters, 71 Incorrect colors, 68 Ink cartridge level of ink in, 52 ordering, 53 replacing, 51 to 56 safety instruction
P P.I.M.
T Transparencies, 22 Transporting printer, 60 Troubleshooting, 61 to 73 Type setting, 15 U Uninstalling software, 71 to 72 USB, 75 Utilities Head Cleaning, 50 to 51 Nozzle Check, 50 to 51 Print Head Alignment, 57 to 58 W Watermark, 21, 24 Windows advanced printing, 23 to 24 basic printing, 14 to 16 system requirements, 75 uninstalling software, 71 86 Index