EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 11/8/04 Originator: RB, CH, JD, SA PSB.2004.03.001C Authorization: PSB.2004.03.001A Total Pages: 19 EPSON Stylus Color 3000, Stylus Pro 4000, 5000, 5500, 7000 Series, 7600 Series, 9000 Series, 9600 Series, 10000 Series, and 10600 Series Maximum Printable Area Limits for the EPSON Professional Graphic Printer line.
Maximum custom page size allowable for EPSON PostScript options (PPD): Stylus Color 3000 EPSON Stylus RIP EPSON Fiery RIP Station EPSON Fiery Spark Designer (Mac) EPSON Fiery Spark Professional EPSON ColorBurst RIP Stylus Pro 4000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus Pro 7500 Stylus Pro 7600 Stylus Pro 9000 Stylus Pro 9500 Stylus Pro 9600 44 in. N/A 44 in. N/A N/A N/A N/A N/A N/A N/A Stylus Pro 10000 Series N/A N/A N/A 44 in.
* These applications allow for tiling of print pages, therefore allowing you to print beyond the printers maximum page length limit and print to the applications limits. The printer driver must be set for Roll Paper (Banner) mode so that page breaks at the printer’s maximum page length do not occur (in essence gives you a 0 margin for the bottom of the page). The Stylus Pro 5000/5500 however will give a slight page break at the 44 inch limit as these printers do not support banner mode.
For Windows Users, if you encounter partial/incomeplete prints while having Finest Detail enabled, please disable this setting. It is recommended for low resolution text and line art to sharpen their edges. For photos, this may create a massive print file that is too large for the printer driver to process correctly. The following examples show how to setup banner printing from Adobe Illustrator 8.x/9.x and CorelDRAW 9 from the PC platform.
Adobe Illustrator CS: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). NOTE: Mac O/S 10.3.3 system is used in this example. Windows versions of this application should be very similar in functionality. Please refer to your software documentation for additional assistance. In this example, a “20 inches wide X 180 inches high” document is created. 1. Click on File and New, set up the width and height (sample shows 20 W x 180 H), then click OK. 2.
3. Click on File, Print, click Setup, under Tiling click on the drop down arrow, select Tile Full 4. Pages and click the Printer button. 5. When the printer setup window comes up, select your printer name and set the Roll Paper Options to: Roll Paper Banner Roll Paper Banner – No Margin ( if printing no margins) 6. In the Copies and Pages section, click on the drop down arrow, select Roll Paper Option. Uncheck Auto Cut then check Save Roll Paper.
. Then click on Print. This will bring you back to the Print window. 8. This time click on Page Setup, you see the following screen, just click on Continue (If you don’t want to see the window again, place a check mark on Don’t Show Again box).
9. When Page Setup is open, click on the down arrow for Custom Paper Size. NOTE: When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (90.5 inches). In this example we take (180/2 = 90), therefore the custom page size created would be 20x90 (inches). 10. Click on New, name the custom size (i.e.
11. Under Paper Size, click on the drop down arrow and select the custom paper size you created (i.e. 20 X 180) orientation is set to portrait mode. Then click OK. 12. In the Print windows the preview pane will show 2 grids or pages. This indicates that a full image is tiled.
13. Click on General, then click the square on Reverse Order. 4. Click on Print.
NOTE 1: When enabled, the first page will be printed first, instead of the last page first. Or Change the orientation to “Reverse”, then you don’t have to check the “Reverse Order”. NOTE 2: Always select the custom page size last, if not, it will default to other paper sizes. NOTE 3: Before printing a large document, make sure you have enough ink to prevent getting an Ink Out message, causing the print job to stop and not completing the entire print.
Adobe Illustrator 8.x/9.x: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and open or place your file in the page layout. 2. Click on File, then Document Setup. The following screen appears. 3. Uncheck Use Print Setup, enable Tile Full Pages and create the page size (in our example we used 44x227 inches). 4. Click, Print Setup. This will bring up the print driver.
5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size. In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media.
8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document setup. Now double-click the “Page” tool. 9. The page should now show the following. 10. At this point you can and resize the image to fit within the printable area and print.
CorelDRAW: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the page size and image for the document as shown in the following image. 3. Click on File and Print Setup.
4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size. In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media. 7. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document.
8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window.
9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check other tab settings (if necessary) and click Print Preview (recommended) if you want to see how the file will be printed or Print to output the file to your printer. For all other applications, please refer to your software documentation for information on maximum custom page sizes for documents, banners or tiling prints.
EPSON PRODUCT SUPPORT BULLETIN Date: 3/25/04 Originator: rws Bulletin #: PSB.2004.03.006 Authorization: Reference: TE03-461 Rev.A, epson10997, TE03-620Rev.A, TE03-620 Rev.B Total Pages: 1 Product: Stylus Pro 5500, 7600DYE, 7600UCM, 9600DYE, 9600UCM, 10000DYE, 10000CF, 10600UCM Subject: Driver Plug-in Up-Date v1.
EPSON PRODUCT SUPPORT BULLETIN Date: 1/23/04 Originator: rws Bulletin #: PSB.2004.01.001 Authorization: Reference: TE03-461 Rev.A Total Pages: 1 Product: Stylus Pro 5500, 7600DYE, 7600UCM, 9600DYE, 9600UCM, 10000DYE, 10000CF, 10600UCM Subject: Connectivity Plug-in Update v1.0bE for the Epson MAC OS X Printer Driver A connectivity plug-in update is available for the standard Epson MAC OS X printer drivers released prior to January 1, 2004.
EPSON PRODUCT SUPPORT BULLETIN Date: 07/03/03 Bulletin #: PSB.2003.05.001B Reference: NA Originator: rws Authorization: Total Pages: 12 Product: Stylus Pro 7600/9600/10000/10600 Subject: MAC OS X Driver Installation and Removal INTRODUCTION: This bulletin was created to inform you how to Install and or Remove the Epson Stylus Pro 7600, 9600, 10000 or 10600 inkjet printer driver on a Macintosh OS X system.
INSTALLING THE DRIVER 1. After the driver is downloaded to your desktop a new folder is created (example: epson10673). Please read the files in this folder as they provide additional information for installing or using the driver. 2. Click on the file with the .DMG file extension (example: SP7600_1.6bE.dmg) to create the printer driver installation package. 3. The printer driver installation package installer has a .pkg extension (example: SPro7600_16b.
4. The installer requires your Macintosh password for Authentication. Enter your Password and click OK. 5. The Installer Introduction screen will be displayed, click CONTINUE. 6. Read the License Agreement and click CONTINUE. You are asked to Agree or Disagree to the License Agreement click AGREE to continue the installation. EPSON Professional Graphics Group Page 3.
7. Select the Destination Disk (your OS X volume) to install the driver on by clicking on its icon, then click CONTINUE. Installation Type is the next step "EASY INSTALL" is the default to perform the basic driver installation, to continue click INSTALL. NOTE: If you see Upgrade instead of Install CANCEL the installation and follow the steps in “DRIVER REMOVAL” 8. Next you see a notification screen to Restart your computer after the installation is completed, to continue click CONTINUE INSTALLATION.
ADDING THE PRINTER TO PRINT CENTER 1. After the printer driver is installed you first need to register it with Print Center. 2. The Print Center Utility is located on your hard drive at the following location: /Applications/Utilities/Print Center. TIP Copy the Print Center to the Short Cut Task Bar for ease of access. 3. You have Two ways to Add a printer. You can use the Add button or you can select Add Printer from the Printers drop down menu, click Add. 4.
5. After you choose the Epson Interface Connection, the Print Center automatically searches the connection for printers. When the search completes: 5.1 Select your printer from the list by clicking on it. 5.2 Next select your Page Setup. Roll Paper is the default. If your work flow will include several of the choices they can be added individually, or to save time you can add all the choices by selecting All.
7. To add or remove information displayed about the printer go to the View Menu and select Columns the choose the information you would like to display: 8. To make the printer the Default printer highlight the printer then go to the Printers Menu and select Make Default or click the Make Default button. 9. The Default printer will be highlighted in the Printer List: EPSON Professional Graphics Group Page 7.
10. To view the Job Status of a printer double click on it in the Printer List to display its information and status: EPSON Professional Graphics Group Page 8.
EPSON PRINTER UTILITY 1. You can access the Epson Printer Utility from the Print Center by: 1.1 First selecting your printer from the Print Center Printer List. 1.2 Next click Configure. 1.3 Then from the new Printer List window select your printer and click OK. 2 1 3 4 1.4 From the Epson Printer Utility you can Check the Status of Ink-Paper-and the printer itself, perform print head Nozzle Checks, Clean the print head, or perform Print Head Alignments. EPSON Professional Graphics Group Page 9.
DRIVER REMOVAL Before installing a New Driver you must first properly remove the existing Driver and all of its components. 1. Open the Epson Driver from any application and select print. Remove all user created “Presets” that were created for the printer you are removing. From the Presets drop down menu select the Preset (example: MYPRESET) then select Delete.. 2. Next open the Print Center and remove all the printers queue entries for the printer you wish to un-install.
3. In the next steps you will be dragging Files or Folders to the Trash. OS X requires you to have proper “Ownership & Permissions” to the Epson folder on your OS X hard drive. Highlight the Epson folder then GoTo File, Get Info and select “Ownership & Permissions”. Click on the Pad Lock to unlock it, then from the Owner dropdown menu choose the User name that was used to install OS X and/or the Printer Driver, in addition a password may be required if assigned for the user. (Example Only) 4.
4.1.2 4.2 The second option is to drag the entire Epson folder to the Trash. C A U T IO N 5. Drag the printers Preferences to the TRASH. Dragging the entire Epson folder to the Trash Deletes ALL Epson Printers. From the Receipts folder Drag the Printers Package information to the TRASH. NOTE: If you only removed the Stylus Pro 7600/9600/ 10000/10600 files from the Epson folder, then ONLY remove the Stylus Pro 7600/9600/10000/ 10600.pkg file.
EPSON Product Support Bulletin Date: PSB #: Reference: Product(s): Originator: 09/25/2002 MS Authorization: PSB.2002.09.004 Total Pages: N/A EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000, 5500 and Stylus Color 3000 Printers Subject: PostScript Printing Support for Mac OS X Native Mode This bulletin provides instructions for installing and configuring a Mac OS X Client with your existing EPSON hardware or software RIP.
2. Click on the Add button. Then select AppleTalk from the top sub-menu and your AppleTalk zone if applicable. 3. The Print Center should scan the network and find all your devices. Select your printer from the list and click on the Printer Model sub-menu. Select Other to continue. 4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model section. Click on the Add button. 5.
IP Printing Installation: 1. Open the Print Center, which can be found on your HDD under Applications Utilities 2. Click on the Add button and select IP Printing from the sub-menu. 3. Enter the IP Address of the Postscript Server under Printer’s Address. Uncheck the Use default queue on server and type in the queue you wish to add. Click on the Printer Model sub-menu and select Other.
4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model section. Click on the Add button. 5. The Print Center should now show the Queue that you typed along with the IP address. 6. Repeat the process to add your additional queues. Your Mac OS X Client should now be ready to print. Note: The StylusRIP does not have a separate folder on the CD to select the printer’s PPD.
EPSON Date: PSB #: Reference: Product(s): Subject: Product Support Bulletin 01/23/02 Originator: PSB.2002.01.002 Authorization: TE00-702 Rev. A Total Pages: EPSON Stylus Pro 10000 (Photographic Dye Ink) Support Root for ZEHPlot software RR 3 This bulletin was created to inform you of the Support Root for ZEHPlot for EPSON software. Background: ZEHPlot for EPSON is a bundled software package for the EPSON Stylus Pro 10000 (Photographic Dye Ink) ink jet printer.
Page 2 of 3
The following flowchart outlines the support root for ZEHPlot. Customer calls EPSON Technical Support Technical Support will troubleshoot accordingly to determine if the issue is hardware/driver related or ZEHPlot related. If issue is with Printer Hardware or Driver. If issue is determined to be with ZEHPlot. EPSON Technical Support will troubleshoot to resolve issue Refer customer to ZEH Software Inc. techsupp@zeh.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 1/23/02 Originator: RR PSB.2002.01.001 Authorization: N/A Total Pages: 12 EPSON Stylus Color 3000, Stylus Pro 5000, 5500, 7000 Series, 9000 Series and 10000 Series Maximum Printable Area Limits for the EPSON Professional Graphic Printer line. This bulletin was created to inform you of the maximum custom page sizes allowable for EPSON Professional Graphic products.
Maximum custom page size allowable for EPSON PostScript options (PPD): EPSON Stylus RIP EPSON Fiery RIP Station EPSON Fiery Spark Designer (Mac) EPSON Fiery Spark Professional Stylus Color 3000 44 in. N/A Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus Pro 7500 Stylus Pro 9000 Stylus Pro 9500 44 in. 44 in. N/A N/A N/A N/A N/A N/A Stylus Pro 10000 Series N/A N/A N/A N/A N/A See NOTE See NOTE See NOTE See NOTE N/A 1 1 1 1 44 in. N/A N/A N/A N/A N/A 44 in.
* - These applications allow for tiling of print pages, therefore allowing you to print beyond the printers maximum page length limit and print to the applications limits. The printer driver must be set for Roll Paper (Banner) mode so that page breaks at the printer’s maximum page length do not occur (in essence gives you a 0 margin for the bottom of the page). The Stylus Pro 5000/5500 however will give a slight page break at the 44 inch limit as these printers do not support banner mode.
Adobe Illustrator 8.01: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and open or place your file in the page layout. 2. Click on File, then Document Setup. The following screen appears. 3. Uncheck Use Print Setup, enable Tile Full Pages and create the page size (in our example we used 44x227 inches). 4. Click, Print Setup. This will bring up the print driver.
5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media.
8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document setup. The page should now show the following. 9. At this point you can and resize the image to fit within the printable area and print.
CorelDRAW 9: In this example, we are creating a banner, which is 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the page size and image for the document as shown in the following image. 3. Click on File and Print Setup.
4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches, unless the document is beyond that size ). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media. 7. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK.
8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window.
9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check other tab settings (if necessary) and click Print Preview (recommended) if you want to see how the file will be printed or Print to output the file to your printer. For all other applications, please refer to your software documentation for information on maximum custom page sizes for documents, banners or tiling prints.
EPSON PRODUCT SUPPORT BULLETIN Date: 11/21/2001 PSB No.: PSB.2001.11.002 Reference: N/A Originator: RD/RR Authorization: Affected Product(s): Epson Stylus Pro 5000/5500/7000/7500/9000/9500/10000/10000CF Subject: Windows XP Driver & Status Monitor 3 Installation Procedure This bulletin describes Windows XP printer driver/Epson Status Monitor 3 installation procedures for the following Epson printer models.
2. As instructed at following EPSON Printer Utility Setup screen Power ON your printer. Your printer will be detected automatically. Select Install the software automatically (Recommended) option then click NEXT to continue at the Found New Hardware Wizard screen. 3. Your will be prompted with Windows Logo verification screen again, Click on Continue Anyway option to proceed to the next step.
Instructions for IEEE 1394 Connection 1. At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar followed by the Windows Logo verification screen. Click on Continue Anyway option to continue. 2. As instructed at the following EPSON Printer Utility Setup screen Power ON your printer. The IEEE 1394 card will be detected automatically.
5. The following Found New Hardware Wizard screen for IEEE 1394 status will be displayed. Select Install the software automatically (Recommended) option selected and click on Next to continue. After the driver files have been copied to you local hard disk drive, click on Finish to complete the driver installation. 6.
Instructions for Ethernet Connection 1. At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar followed by the Windows Logo verification screen. Click on Continue Anyway option to continue. 2. At this point DO NOT POWER On your printer and at the EPSON Printer Utility Setup screen click on Stop searching button to continue with the installation. Next, you will see the progress bar followed by the Windows Logo verification screen.
4. Power ON your printer next, then you will need to redirect the port to the Type B Ethernet card’s IP address. Click on the Start button, then Control Panel followed by Printers and Other Hardware then go to Printers and Faxes. Right click on the printer icon and choose Properties from the pop-up menu. 5. At the printer properties screen, click on Ports and then on the Add Port… button. On the Printer Ports screen, highlight Standard TCP/IP Port and click on New Port.
6. At the Add Standard TCP/IP Printer Port Wizard, screen click on Next. Then on the next screen type the Type B Ethernet card’s IP address. Check with your System Administrator for the correct IP address assigned to the Epson Type B Ethernet card on your network. 7. If Windows identifies the Epson card automatically, click Finish at the Completing the Add Standard TCP/IP Printer Port Wizard. If your card is not identifies as an Epson network card automatically, click on Custom and then Settings.
8. On the next screen click on Apply and then on Close to finish the installation. Your printer driver installation has been completed and the printer is ready to print. 9. To install Epson Status Monitor 3 follow the instructions under section heading Installation Procedure for Epson Status Monitor 3.
Installation procedure for Epson Status Monitor 3 1. At the EPSON Status Monitor 3 setup screen highlight your printer then click OK. Next, you will see the progress bar followed by a window indicating that EPSON Status Monitor 3 is complete.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 09/28/01 PSB.2001.10.001 N/A Stylus Pro 10000 FAQ Stylus Pro 10000 Inks Originator: BS Authorization: Total Pages: 2 This bulletin address Frequently Asked Questions related to Stylus Pro 10000 Ink questions. Q1. I am installing my Stylus Pro 10000 for the first time why is it important to use the “Ink Cartridge Starter Set” that came with the printer? A1.
Q6. How can you tell the difference between a Archival Ink cartridge and a Dye Ink cartridge other then the part number on the cartridge? A6. The easiest way is to look at the color of the ink cartridge plastic covers: Archival Ink cartridge plastic covers are very dark Grey Dye Ink cartridge plastic covers are light Grey Q7.
EPSON PRODUCT SUPPORT BULLETIN Date: 09/06/2001 PSB No.: PSB.2001.09.002 Reference: N/A Originator: RR Authorization: Affected Product(s): Stylus Pro 7000 Series, 9000 Series and 10000 Series Large Format Printers Subject: Printer Connectivity Issue due to Incorrect Model Name Selection – Printer Reports Off-Line Issue Description: 1.
EPSON PRODUCT SUPPORT BULLETIN Date: 7/26/2001 PSB No.: PSB.2001.08.003 Reference: TE01-045 Rev. A Originator: JD, RR, TC & MS Authorization: Affected Product(s): EPSON Pro Graphic Printers Subject: Compatibility Chart for Macintosh OS X Classic This bulletin provides information on compatibility for EPSON’s Pro Graphic printers running in Macintosh OS X Classic mode. Mac OS X provides the Classic environment mode for Mac OS 9 compatible applications and device drivers. Classic mode will require Mac OS 9.
EPSON PRODUCT SUPPORT BULLETIN Date: 06/26/2001 PSB No.: 2001.06.005 Reference: N/A Originator: RR Authorization: Affected Product(s): Stylus Pro 10000, Stylus Pro 5500 Subject: IEEE 1394 (FireWire) Driver Installation Procedure This bulletin provi des detailed installation instructions for the IEEE 1394 (FireWire) interface card with the Stylus Pro 10000 and Stylus Pro 5500 printers. The driver CD that comes in the box with the printer should be used for this installation.
6. If the correct model is listed, click OK. The installation will begin. 7. Once installation is complete, you will see the following window. At this point power on your printer. 8. Once the printer is powered on, you will get the “Found New Hardware Wizard” window. Click Next to continue the IEEE 1394 driver installation. 9. Click “Search for a suitable driver for my device (recommended)” and click Next.
10. Select “Specify a location” and click Next. 11. Browse a. b. c. to one of the following directories and click OK (Where “G:\” = CD drive letter): G:\Archival\WIN2000 (For Stylus PRO 10000CF, Archival Inks) G:\Dye\WIN2000 (For Stylus PRO 10000, Photographic Dye Inks) G:\Win2000 (For Stylus PRO 5500) 12. You should see the following message, click Next.
13. Once the IEEE 1394 driver is completed, click Finish. 14. At this point the OS will PnP the printer and complete the installation. 15. Once installation is completed, verify the printer port connection in the printers Properties window is set for EP1394_00x (x indicates the number of printers). 16. This completes the IEEE 1394 (FireWire) installation of the EPSON Stylus PRO 10000 Series / Stylus PRO 5500.
EPSON PRODUCT SUPPORT BULLETIN Date: 6/26/01 PSB No.: PSB 2001.06.
EPSON PRODUCT SUPPORT BULLETIN Date: 06/20/2001 PSB No.: 2001.06.002 Reference: TE01-089 Rev.
To use the C823632A Type-B Ethernet card with the AC Adapter set the power select switch located on the board of the interface card to position “A” as shown below in Figure 1. For more details refer to the Getting Started section of the Administrator’s Manual that is included with the Ethernet card. Figure 1. Other Possible Workaround(s): 1. Disabling Photo Accelerator Disable the Photo Printing Accelerator option in the driver - This will result in slower print speeds.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 8/8/02 Originator: RR PSB.2002.01.001A Authorization: PSB.2002.01.001 Total Pages: 12 EPSON Stylus Color 3000, Stylus Pro 5000, 5500, 7000 Series, 7600 Series, 9000 Series, 9600 Series and 10000 Series Maximum Printable Area Limits for the EPSON Professional Graphic Printer line. This bulletin was created to inform you of the maximum custom page sizes allowable for EPSON Professional Graphic products.
Maximum custom page size allowable for EPSON PostScript options (PPD): EPSON Stylus RIP EPSON Fiery RIP Station EPSON Fiery Spark Designer (Mac) EPSON Fiery Spark Professional Stylus Color 3000 44 in. N/A Stylus Pro 5000 44 in. 44 in. Stylus Pro 5500 N/A N/A Stylus Pro 7000 N/A See NOTE 1 Stylus Pro 7500 N/A See NOTE 1 Stylus Pro 7600 N/A N/A Stylus Pro 9000 N/A See NOTE 1 Stylus Pro 9500 N/A See NOTE 1 Stylus Pro 9600 N/A N/A Stylus Pro 10000 Series N/A N/A N/A N/A 44 in.
NOTE 1: a. Under Win 9x/Me, the PPD limit is 129 inches. b. Under Windows NT, 2000 and XP, the PPD limit is 1771.6 inches (SP7000/9000 Series) and 1800 inches (SP7600/9600/10000 Series). c. Under Mac OS 8.x/9.x, the PPD limit is 273.06 inches. NOTE 2: Adobe Photoshop has a pixel limitation of 30,000 pixels, which means that a document created @ 300ppi can only reach a maximum page size of 100 inches (H and V).
Adobe Illustrator 8.01: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and open or place your file in the page layout. 2. Click on File, then Document Setup. The following screen appears. 3. Uncheck Use Print Setup, enable Tile Full Pages and create the page size (in our example we used 44x227 inches). 4. Click, Print Setup. This will bring up the print driver.
5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media.
8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document setup. The page should now show the following. 9. At this point you can and resize the image to fit within the printable area and print.
CorelDRAW 9: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the page size and image for the document as shown in the following image. 3. Click on File and Print Setup.
4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches, unless the document is beyond that size). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media. 7. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK.
8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window.
9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check other tab settings (if necessary) and click Print Preview (recommended) if you want to see how the file will be printed or Print to output the file to your printer. For all other applications, please refer to your software documentation for information on maximum custom page sizes for documents, banners or tiling prints.