Quick Reference Guide

Loading Roll Paper (Continued)
Loading Roll Paper (Continued)
2
3 Feed the paper into the paper slot and then pull it
down so it extends through the slot.
4 Turn the paper roll back to remove the slack. Then
align the paper with the two rows of holes at the
paper exit.
Loading Roll Paper for Printing
Once the roll paper is attached to the spindle and inserted
in the printer, you’re ready to load it for printing.
To avoid feeding excess paper, make sure you
don‘t select Sheet when you’re using roll
paper.
If you’re printing on canvas, vinyl, or other
heavy media, select Roll Cutter Off.
2 Pull the paper set lever out, to the released position.
To avoid damaging the printer, never move
the paper set lever while the Operate or Pause
light is flashing.
5 Push the paper set lever all the way in, then close the
roll paper cover.
If you’re using Roll Auto Cut and the leading edge of
the paper is uneven, press the Cut/Eject button to
recut the edge.
6 Press the Pause button. The print head moves and
the paper feeds into printing position automatically.
READY appears on the control panel display.
1 Make sure the printer is turned on. Then press the
Paper Source button repeatedly until one of the
Roll lights comes on (either Roll Auto Cut or Roll
Cutter Off).
SP10600 QRG 9/16/02, 05:11 PM2