Quick Reference Guide

Message Light Explanation Response

INK LOW Ink Out light(s) flashing Ink cartridge(s) nearly Replace ink cartridge(s) indicated

empty (printing continues). by Ink Out light(s). See page 6.

INK OUT Ink Out light(s) on Ink cartridge(s) empty Replace ink cartridge(s) indicated

(printing stops). by Ink Out light(s). See page 6.

LOAD ROLL PAPER Paper Out light on Paper source setting in Make sure the right paper is loaded

LOAD SHEET PAPER print options is different and the paper source setting is the

from control panel. same on the control panel and print

options.

MAINTENANCE REQ. A maintenance part Note the error number and contact

<error number> needs to be replaced soon. EPSON.

Error messages

For a complete list of error messages, see your Printer Guide.

Control Panel Messages

Message Light Explanation or response

READY Operate light on Printer is ready to print.

PRINTING Operate light flashing Printer is receiving data.

RESET All lights flash briefly Printer is resetting.

PRESS PAUSE BUTTON Pause light on Press the Pause button to continue.

WAIT Pause light on or Printer is warming up, performing maintenance, or

flashing charging ink.

PAUSE Pause light on Printer is paused. To resume printing, press the Pause

button.

INK DRY FOR Pause light flashing Printer is paused to let ink dry. Wait for the number of

<number> MIN minutes shown.

Status messages

These messages indicate normal phases of printer operation.

Continue

SP10600 QRG 9/16/02, 05:11 PM8